mikrotik

Hi Gang. I have a linux bridge vmbr0 configured on a 1g interface for management (192.168.99.0/24). The switch taking this traffic uses an untagged port to translate traffic to vlan id 99 (management vlan). This works fine and is the default route for proxmox to fetch updates, etc. I am trying...

Hello, Currently, I have the setup from the top of the attached screenshot - MikroTik hEX which is connected to a computer running Windows via Cat5e cable. The computer has Hyper-V enabled and there are 2 VLANs coming from the MikroTik - one for the PC management (Windows) and one for the VMs...

Hi; I'm a newbie and am looking for some guidance I have OPNSense virtualized on Proxmox. Furthermore, I have 3 physical NICs on my PC; and have created 1:1 bridges for each NIC. 1 for Wan and 1 for Lan (all good here). I have created 4 VLANs (10, 20, 30, 40) on OPNSense, and using this last...

I'm trying to configure SDN QinQ in my Proxomx cluster and I am wondering is my configuration correct and is there anything I can do to increase performance. My goal is to have VMs and containers on a default 1500 MTU so I did the following: I have eno1 & eno2 bonded (LACP (802.3ad)) to bond0...

Hi, i have a dedicated server on Ionos with Proxmox. Server wan interface is enp35s0 Has a public ip 217.xxx.xxx.10/32 Gateway 10.255.255.1 I have an additional ip address that ionos delivered me via vlan1010 for using it in virtual machine. 217.xxx.xxx.164/32 My /etc/network/interface: auto...

Hello! I don't know if this is Proxmox or Mikrotik issue, but I've stuck with this for good. I'm getting VLAN ID from another location inside which are another VLANs, so we have QinQ here. All is delivered to rack cabinet, where Proxmox cluster is running. What I want to do is to strip...

Hello, please, is MikroTik CRS309-1G-8S+IN good for connect 3 PVE servers on 10GBe network for Ceph and cluster network? I want separate network for Ceph and for PVE cluster, but I want this networks on 10Gb networks, because I need faster copy/move nodes and etc between this servers. This...

Good afternoon. If someone can help, have the following configuration: - The platform is a debian 9 VPS. - I installed the proxmox and a virtual machine with Mikrotik RouterOS, this is already configured, but has no internet. Check out my configuration: No debian 9(proxmox): auto lo iface lo...

Hi all! me again. I've been working for around 1 week trying to use Proxmox over ESXi but this is giving me way too many headaches. Still, I think this time the issue is not Proxmox, but my lack of networking knowledge. Anyways, this is what I'd like to archieve: Basically, my server...

I've been running a Mikrotik CHR VM version 6.41.2 for some time now, only for the record of using the embedded TheDude network monitoring package. Since I've been having problems with shutting the VM down before taking a backup from PVE, I've been searching for a way to notify the VM. This was...

Hello, I need help I have instal and run VM CHR mikrotik with disk 1GB. Now I wont run The Dude. Dude's data i want save on second disk. How correctly add secondary disk to VM?