lagg

  1. T

    Windows 2022 Laggy (Terminal server and SQL server )

    We are passing our cloud infrastructure from ESXI to Proxmox, we have found that the windows server 2022 machines are very slow, they are used for Terminal Server and they use their software which consumes SQL server, I have looked to activate the "disable" checks and "SSD Emulation" of the...
  2. onlime

    ifupdown2 advanced bond config options for LACP

    Hi there. I have my Proxmox VE (latest 7.3) pre-configured for LAGGs with LACP, currently only with a single interface assigned to bond0 slaves, so I can go live by adding the second interface once I (physically) migrate to new switches (Aruba 6300 Series). All works fine so far and «Apply...
  3. Y

    I have 2 LAGG bonded networks. They're both supposed to be 2 Gb, but only one is per dmesg | grep -i duplex. Please Help.

    Both networks are working. However, Bond0 has one interface that's running at 10 Mbps Full Duplex and the other at 1 Gb. Bond1 is running at 2 Gb full Duplex. All 4x interfaces are on the same card. Bond0 is assigned to vmbr0 and is my WAN Bond1 is assigned to vmbr1 and is my LAN vmbr0 and...
  4. M

    Setting up LAG inside Proxmox?!

    I have a Dell PE720 with 4 NICs, just today 4 ports on my Unifi Switch 8p opened up, so I got the idea to do a Bond of all ports, and give it one IP that would be load balanced! So I deleted all the bridges, configured my mighty Bond with 4 10Gb NICs. Added a bridge with an IP and pointed it to...
  5. H

    LACP + Vlan + Disaster scenario

    Hi everyone, I'm running a particular scenario here I'm using three nics in total. enp9s0f0 enp9s0f1 Are bond to LACP, slaves to Vmbr1, vlan aware Should run on a 66 Vlan enp3s0 slave to vmbr0, vlan aware should run on primairy gateway --- The reason for this setup is to, mainly run on...
  6. D

    Increasing PVE bandwidth with LAG/LACP?

    Dear Community, I'm trying to increase the concurrent bandwidth available of a LAN Network (Between 2 PVE Instances) with the following environment: PVE1 NICs: 2 x 1 GBit PVE2 NICs: 2 x 1 GBit HP Switch 2530 24G The idea is to increase the LAN Bandwidth from 1 GBit to 2 GBit /s between PVE...
  7. T

    [SOLVED] [Help] Static LAGG 2GB/s to 2 clients 1 Gateway from 1 NAS

    Hello, I'm getting desperate, I need help to find a setup where 2 windows clients can download files from my NAS using SMBv3 both at 1GB/s at the same time for a total 2GB/s sent from the NAS... I've tried a lot of things and got LAGG working between lots of parties achieving 2GB/s several...
Top Bottom