ipxe

Hi, As I experiment with iPXE, an open source network bootloader firmware, I have to rebuild it with HTTPS support that is missing from the official releases. https://boot.ipxe.org/ These scripts are meant to be directly pasted into the proxmox console and will create an LXC container ready...

Hi, I have been doing experimentation with netbooting (using ipxe to boot ISOs and liveusb and eventually netboot to iscsi) I'm trying both bios and efi VMs. And I notice that the bios VM, never give up, unless you boot into something that hangs, they never stop trying to boot. However the...

Hello, I have sucessfully automated the proxmox installation with: wget https://enterprise.proxmox.com/iso/proxmox-ve_8.2-2.iso cat <<EOF1> fr-nvme-zfs.toml [global] keyboard = "fr" country = "fr" fqdn = "pveauto.testinstall" mailto = "tru@pasteur.fr" timezone = "Europe/Paris" root_password =...

I've installed manually Proxmox 8.2 using the Proxmox Automatic Install guide (https://pve.proxmox.com/wiki/Automated_Installation) with success. Now I want to install the generated ISO "proxmox-ve_8.2-1-auto-from-iso.iso" through iPXE to be able to deploy it massively; the steps followed are...

I'm using the latest Proxmox VE 8.0.4 and I'm trying to get the iPXE network boot to work. When I configure an VM with EFI bios everything works perfectly, but VM's with Seabios iPXE cannot get an DHCP address. The VM's both use the same bridge network. (vmbr0) I analyzed the network packets...

So I am completely aware this would be considered officially unsupported as already installing PVE on top of Debian is, however I basically would like to hear from someone who attempted the same or abandoned doing so and why. The logic behind iPXE booting multiple nodes is ease of management -...

I'm going to switch to PBS as an alternative to Clonezilla when storing images. The system is complete (but not finished) and is working fine, even I've to do some tasks by console which is totally fine for me. The setup consists of a Debian Live system (Debian Live Manual) and a handful of...

Hello, kvm could start a VM with a specific ROM. Could you add an option in Hardware section / network card to specify a ROM file ? Proxmox VE 6.2.10 : pve-manager/6.2-10/a20769ed (running kernel: 5.4.44-2-pve) QEMU emulator version 5.0.0 (pve-qemu-kvm_5.0.0) # compile ROM for realtek 8139...

Hello, I have a new VLAN 8. This network supports network boot and tftp settings. Requests that are network booted from a KVM host that is tagged on VLAN 8 get the right IP from DHCP, then goes to fetch the pxelinux.0 from my nas. This works as well as the file is downloaded, but then it just...

Trying to access IPXE console through putty. Logging in through machine IP address (the one at the top of the boot screen). Login successful, but shell does not recognize IPXE commands. How do I access the IPXE console through SSH?

Hello, We have an iPXE server that has worked for us for years (in a network of 1000's of hosts and vendors) and never had issues, till we upgraded proxmox to version 5. Now we are unable to boot over the network for automated installs, for any guests on the proxmox cluster. I searched the...

Is it possible to replace iPXE with PXELinux (or something that works like usual hardware PXE)? I already have PXE server that works perfectly and I don't want to change its configuration. But also I want to boot my VMs as physical machines. Google for an hour but with no luck.