i915

Hello, I'm new to Proxmox and came from QNAP. I'm pretty new to all of these things and have almost zero knowledge about linux. Anyway, I'm trying to create VFs for my Intel 12400's iGPU (UHD 730) My goal is to assign a virtual iGPU to my Plex and Windows 11 VMs. Here's my hardware: -Intel...

I've totally revamped the blog post I wrote in June using Proxmox 8.0 and how to configure it for vGPU with Windows 11 Pro. The new post is fully updated for Proxmox 8.1, re-wrote every section, and added a lot more content driven by user feedback. Proxmox VE 8.1: Windows 11 vGPU (VT-d)...

I tried to PCI-passthrough the i226-V ethernet card to a Linux (openwrt with latest i915 drivers). Then connected its LAN to the WAN of Xiaomi 7000 (2.5G) router. But it only worked at 1000 mbps full-duplex mode. I tried to force Xiaomi 7000 to negoticate with OpenWRT VM at 2500 mbps...

Hi guys, I've managed to install sriov virtual gpu to windows 11 vm according to this guide. Everything is working now and I can access the vm via spice or rdp. Howevewr, I'd like to access this vm locally via keyboard, mouse and monitor attached to proxmox host itself. I can passthrough mouse...

I have recently started to use Proxmox to host my Plex server. i915 on my Alder Lake seems to be acting up and I can't seem to find to much information out there on how to fix it. Setup: i9-12900K 64GB DDR4 RAM Proxmox 7.1-11 Kernel 5.15.27-1-pve Plex is running in a LXC with dev/dri passed...

Hello! I am in the process of transferring a series of VMs from an ESXi build onto a new Alder Lake (i9-12900K) build with Proxmox. In particular I am working on getting the integrated Intel graphics passed through to a Debian 11 VM for Plex transcoding. I have been following GVT-g tutorials...

Hi, I'm trying to passthrough the iGPU on Intel Nuc 10iFNH, on the host the i915 module is installed (modprobe i915 completes without output), but within the container it's not. Is this a PVE kernel issue? root@plex:~# modprobe i915 modprobe: FATAL: Module i915 not found in directory...

Hi, I am trying to setup intel gpu transcoding, cpu is 9700K, but cannot even see the /dev/dri device on the host I do not have any /dev/dri device on the host... ls -l /dev/dri ls: cannot access '/dev/dri': No such file or directory lsmod | grep i915 i915 2306048 0...

Some opengl function of i915 must work on a device with addr 0000:00:02.0(a intel bug or opengl ? very annoying:mad:) In proxmox 7.0 the mdev is at 0000:00:10.0,and there is no way to change it via web or conf file.Is there some args like display=on in libvirt?

After spending the last 2 weeks gouging my eyes out trying to make this work, I am finally asking for help. I have a ASRock B560M Pro 4 with a Core i9 10900(non k). The IGP on comet lake barely works on linux requiring the use of this https://patchwork.freedesktop.org/patch/412664/ kernel...

SOLVED: Ignore this, it was a defective EDID that triggered a chain reaction of problems trying to fix that... :mad: Proxmox 6 works great and IGD passthrough works fine as before! Hello, I pass the host's integrated gpu (Intel G4400 cpu, skylake) to some vms, linux and win ones. They were...

Hi There, I currently have a headless Intel NUC7PJYH and can passthrough the Intel IGP to a VM running Ubuntu 18.04.3LTS as long as the machine type is set to “Default (i440fx)”. I don’t use the passthrough Intel IGP for graphics output, I just pass it through as a secondary graphics card (the...

Hi, When I'm trying to install Proxmox on a new build (Fujitsu 3644-B motherboard, Intel i3-8100 Coffee Lake, 32GB ECC RAM, C236 chipset, Intel UHD 630 integrated graphics) it's giving me a black screen after the initial GRUB boot loader. I would expect there's some incompatibility with the...