hardware passthrough

As the title suggests im attempting to passthrough an HBA card to a TrueNas VM and im not having much luck. Im new to Linux and Proxmox in general so I could just be doing something glaringly wrong but im unsure how to proceed at this point, I can see all the drives in Proxmox in the web gui...

Hi everyone, I have already tried to do GPU Passthrough, but without success, here is my configuration: - Ryzen 5 5600G - RX 6750 XT - CoolerMaster 800+ Gold - 2x8Go RAM - Omen motherboard from a pre-build pc The motherboard is very low end, so I can't unlock anything in bios. There is almost no...

Hi. Thanks for the great product. I run a Proxmox server, some times I'd like to play games on the same machine. So I installed a real Windows on it. 1) /dev/sda: EFI and LVM partitions for Proxmox-on-Debian. Windows EFI bootloader resides here too (as I see it mounted at /boot/EFI. GRUB has...

hello good afternoon, i have been having troubles trying to set up a vm for playing genshin i was able to get it to the login screen by either using the -hypervisor flag or kvm=off flag however not only does my screen resolution gets set to 1280x800 and audio doesnt work, but it also disables...

I encountered an error when I tried to passthrough the HP SSD Ex920, which caused the virtual machine to fail to start normally, and the prompt is as follows swtpm_setup: Not overwriting existing state file. kvm: -device vfio-pci,host=0000:02:00.0,id=hostpci2,bus=pci.0,addr=0x1b: vfio...

Hi everyone! I just bought a server and installed Proxmox VE on a ssd device. Now I want to run only one VM with Windows Server 2022. The VM should be stored on my Microchip Adaptec SmartRAID 3101E-4i Controller with 4 SATA SSD devices, which I turned into a RAID10. That worked very easy. The...

Hello, I'm running PROXMOX 7.1-7 on a Intel Xeon platform and I'm attempting to get hardware pass-through working. I've enabled VT-d in the BIOS. I've added intel_iommu=on to GRUB_CMDLINE_LINUX_DEFAULT I've ran proxmox-boot-tool refresh The system persists in telling me that IOMMU isn't...

I've spent the latter part of the last 24 hours trying to setup some VM's from backup onto PROXMOX 7.1-4. I was upgrading from an older version. Relevant hardware: Motherboard: Supermicro X10DRi-T (BIOS: 3.4a) CPU(s): Intel Xeon E5-2698v3 Hardware pass-through worked great until I performed a...