h310

im attempting to passthrough a Dell H310 to a TrueNAS VM ive created (which i tested to make sure it boots up and works properly without passing through the SAS card), but whenever i try passing through the SAS card to the VM and attempt to start it, it seems to disable (?) all PCIe devices, and...

Hi. I finally acquired a server to play with: PowerEdge 720 with an H310. I will be installing Proxmox on the server on a sata SSD connected to the 2.0 sata port that's noramlly used for the optical drive. I will fill the drive slots with a mix of SSDs and 1 or 2 4TB HDDs. Maybe some nvme...

This is my first post here so please be gentle. I'm very new to Proxmox. I was a TrueNAS fanboy, but have decided to switch to Proxmox because of how well it handles containers and VMs. So, I have a Dell Poweredge R720 with the H310 controller in IT mode. In a nutshell, I have four WD red 4TB...

Hi community! I recently purchased a Dell PE T320 with PERC H310 flashed in IT mode. Today I managed to install PVE6.2.1 with ZFS RAID1, without any incident; however the system hangs with the last few lines like random: systemd-udevd: uninitialized urandom read (16 bytes read) random...

Ich möchte bei meinem System vom Onboard SATA Controller auf zwei H310 im IT-Mode wechseln. Ich habe zwei RAIDZ Pools mit jeweils 4 Platten. Lassen sich die in ZFS Pools befindlichen Platten am OnBoard SATA Controller einfach auf die H310 wechseln? Oder zerstört mir dies die RAIDZ Pools?

Hi everyone, I have a Dell Power Edge T610 server that I want to install PROXMOX using ZFS. I have four 1TB hard drives that I want to use, I flashed an H310 card I found to IT mode LSI using this guide Everything went well, no errors, no issues. I used this guide as the H310 card came from...

Hi guys, Need help to get best performance for my server. - DELL PowerEdge R820 - CPU : 4 x 2.60Ghz E5-4650L Xeon Eight Core - RAM : 12 x 16GB PC3L-10600, [192GB Total] - HDD : 8 x 960GB SSD SATA 2.5" 6GB/s (Samsung PM853T) - RAID : PERC H710 (I ordered a H310 since H710 doesn't support HBA or...