fiberchannel

Good morning, I have just added the LPe12000 Series 8Gb Fiber Channel Adapter card in addition to my main network card to my proxmox server but I do not see it in proxmox despite it being detected in IDRAC. Is it possible to make this card functional under proximox?

Hello, I'm trying to get the best storage possible using fiber-channel SAN. With Multipath, I'm able to get the SAN appear as disk on my nodes, and I'm able to create a PV/VG on it. So I have now a Shared storage based on LVM, on my SAN, available on all my nodes. The only issue I get, is...

With VMware transitioning to subscription-only licensing, and deprecation of a lot of their products. I'm exploring alternative virtualization platforms suitable for an enterprise environment we manage, which includes: 12 hosts with 600 VMs at the main site. 6 hosts with 20 VMs at a hot site...

Hi! I have a question about the connection and compatibility that proxmox can give me when connecting direct 4 Lenovo Servers to a Storage via 16GB fiber channel. (DAS Connectivity). *Without SAN Switch* The storage has 2 controllers, each one with 4 fiber ports, which allows us to connect a...

I got some servers running PVE and one PBS, I want to connect them with HBA fibre cards but i dont exactly know if it supports it, or even how to setup it. By now the cards are running in LPFC drivers. 06:00.0 Fibre Channel: Emulex Corporation LPe12000 Series 8Gb Fibre Channel Adapter (rev 03)...

Hello, since Kernel 5.15.64 (including 5.15.74) our FC HBA stopped working and doesn't see any LUNs. Used hardware: 05:00.0 Fibre Channel: Emulex Corporation LPe31000/LPe32000 Series 16Gb/32Gb Fibre Channel Adapter (rev 01) 05:00.1 Fibre Channel: Emulex Corporation LPe31000/LPe32000 Series...

Hi! My problem is that i don't get my Tape Drives & Library show up under Proxmox over Fiber Channel. Under Windows i installed OCManager from Emulex and everything showed up in Device Manager, easy, but under Linux i don't know. My HBA(emulex lpe11002) is recognized and show up...

Hi, I have 4 Proxmox servers, all connected to a Fiber Channel storage using multipath which is serving two volumes: STORAGE-DATA and STORAGE-DUMP. Every node is showing 4 sd* devices (2 per volume) and one mapper device per volume: root@node2:~# multipath -ll STORAGE-DATA...

Hallo, gibt es irgend wo eine Anleitung wie ich eine LUN in Proxmox einrichte geht das per GUI oder nur per CLI ? Hat jemand das schon mal gemacht ? Aktuell betreibe ich 5 Nodes in einem Cluster und würde gerne das vorhandene FC SAN nutzen. grüße mmo

Hi All, I am fairly new to this, so it might be a simple issue. I have node that I have presented storage to from a SAN using FC. I have installed multipathing on the node, but if I run 'lsblk', I see multiple entries for my two LUNs. Is there something I am missing? I have attached screenshots...

Hi, In my enviroment I have a SAN storage connected to my proxmox nodes with 2 different fabric and each node is connected on both fabric. Obviously I have configurated a multipath service on all node but if I reboot one of the fabric in order to test the failover all of my proxmox nodes and vms...

Hi, I have some bandwith problems for my backup. At now we are doing all backup with proxmox tool using nfs protocol but this take a lot of time ( about 14h for 20tb of vms ). All of our storage are manage via 8Gb/s FC and LVM then we have 2 redundant gigabit networks, one dedicated for proxmox...

Hi all, I've two servers directly connected to a dot-hill fiber channel array. I'd like to setup this storage as clustered lvm and NOT with a clustered filesystem like ocfs or gfs, exposing all luns to all servers. Some questions: 1- is it possible? 2- if yes, I've to use lvm (creating vg on a...

It seems that while 4.2 came with a blast of fresh air, it has broken my box. I have Qlogic dual port fiber cards. I'm using IOMMU to give these cards to my guest system. After upgrade from 4.1 it has only on card available to guest. lspci: 01:00.0 Fibre Channel: QLogic Corp. ISP2432-based...

Hi everyone I'm sorry that I'm asking this question in this forum, but I don't know where else I could get a answer to my question. I'm a newbie to FC HBA but we just got many servers from our clients that won't be used anymore. I wanted to build a SAN with 3 proxmox nodes. My questions are...