debian 12

Hello to everyone, this is my first post! First of all let me thank you all because despite being a noob and working in a completely different field, thanks to the forum I learnt a lot. Let me introduce my hardware setup: a machine hostname 00-lazarus with an Intel Pentium G3220 (Proxmox VE...

Hello, I'm trying a software RAID1 setup with a Debian12 VM. My 2 disks have each a 1 GB partition, type Linux RAID, bound together as /dev/md0, for /boot a 1 GB partition for ESP a Linux LVM partition, bound together in one VG, providing LVs for root and swap UEFI does not know about RAID1...

Hi, I have a preseed.cfg which is working with debian-12.8.0-amd64-netinst.iso to install a physical machine via a usb key and Ventoy. I would like to do the same on a proxmox VM. Is there any tutorial out there which covers this particular problem/requirement? Thanks for any hints Michael

I am new to Proxmox and need to create a proxmox server for my business, although I have done some research I need some advice. I've been advised to install Debian first, then Proxmox. I know that you can also install Proxmox with the ISO directly without going through Debian. Knowing that my...

Hi Everyone. I am having a machine running Debian, and it has already a running zpool (only personal stuff, the system does not run from that pool). I am considering turning this into a PVE by following the official install-on-debian guide, but I am not sure if that would hurt the existing...

I've set up an Ansible script to build a very basic Debian 12 container. Unfortunately, apt dist-upgrade hangs for 10 minutes the first time it's run, so I want to create a template from the point where that command finally finishes (I need to apt dist-upgrade because the base image...

Hi, hope someone can help. I setup a PIA server in a container on Debian 12. I've configured the container to start and connect to to PIA via openvpn at boot. That is working fine and the container gets a new public IP. The issue I then have is trying to connect another container or VM through...

Hi, I've recently upgraded from Proxmox 7 to Proxmox 8.2.4 and I'm running into an issue with running commands on a VM using QEMU Guest Agent using API calls. This previously worked fine on Proxmox 7 but does not work anymore on Proxmox 8.2.4 What DOES work: - API Calls to proxmox, e.g. get...

Hello, i have a problem with my LXC, work many hour on it to reduces the amout of errors i had, i think the last problem is this root@:~# kubectl logs -n kube-system kube-proxy-sqwhk I0703 11:18:47.200979 1 server_linux.go:69] "Using iptables proxy" I0703 11:18:47.208414 1...

Debian 12 verhält sich bezüglich ZVOLs anders, als es Proxmox 8.2.2 erwartet, in /lib/udev/rules.d/60-zvol.rules steht: # Persistent links for zvol # # persistent disk links: /dev/zvol/dataset_name # # NOTE: We used to also create an additional tree of zvol symlinks located at #...

pveversion is at the bottom to save time for people looking only for the fix. Generally I do not use apparmor on my containers and I find them suitably secure as they are. But recently I experienced a situation where I had to get apparmor working, if not just temporarily. During the...

Having recently installed 6 nodes for Proxmox I figured out a way to make it a lot simpler to do if you didn't want to use the Proxmox ISO image. I didn't personally because of the partitioning decisions made. Now I'm new to Proxmox but have been using Linux for going on 30 years, mainly on...

Hallo zusammen, ich habe folgendes Problem. Ich habe einen Server mit: i7-7700, 64GB RAM, 2x 512GB NVMe SSD's. Ich habe mir auf regulären Weg ohne viel Tricksereien Proxmox 8.2 installiert (6.8.4-2pve). Mein Problem ist es, dass der Hypervisor sich komplett aufhängt, meine CT/VM...

Hey there. I've a problem with new lxc containers using either debian (12) or ubuntu (22.04). The container freezes after every command/there is a delay. Config: 2 Cores (Intel i3 12100) RAM/SWAP: 2048MB IPv4 static filled IPv6 static empty Nesting enabled by default Unpriviliged container 4...

Hello everyone, I'm trying to learn about proper security procedure with proxmox. On my current server : root@server:~# hostnamectl Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.2.16-8-pve Architecture: x86-64 It seem's 6.2.16 had gone EOL one year...

Hi When using the serial console and navigating around lines, there is a lot of strange behavior - Text writing over previous text, incorrect current location on the line etc Is this expected behavior ? Have I missed a step or something? Apologies; I am new to this

Guten Abend an alle. Ich stoße hier auf ein komisches Problem und hoffe das Ihr mir helfen könnt. Ich habe eine neue Debian VM aufgesetzt mit den Minimal Server requirements wie im folgenden Beitrag (https://www.howtoforge.com/tutorial/debian-minimal-server/) Ich hab den Guest Agenten...

I've developed a script that streamlines the Proxmox installation process atop Debian 12 (Bookworm). You can access to contribute or for more information in this Github Repository Requirements - Installed Debian 12 Bookworm - Superuser permissions su root - Installed Git apt install git -...

Hi, I use a series of scripts to generate system tray icons to indicate when otherwise invisible background tasks are running, such as Timeshift, so that I don't reboot & corrupt something. I've been using the same bunch of scripts for everything with success for years now, but since installing...

Hi All, Apologies if this is in the wrong thread. I've recently started experiencing issues with SSH & New CT, [ connect to host 10.9.1.246 port 22: Connection refused ]... I Created a new CT, added my SSH Public key went through the setup & saved the config. Started the newly created CT &...