bug?

I thought I should report : host has ecc-ram Jun 15 14:03:20 pve kernel: VERIFY3(insert_inode_locked(ip) == 0) failed (-16 == 0) Jun 15 14:03:20 pve kernel: PANIC at zfs_znode.c:620:zfs_znode_alloc() Jun 15 14:03:20 pve kernel: Showing stack for process 933423 Jun 15 14:03:20 pve kernel: CPU...

Hello community, we observe a strange problem here (Cluster on PVE 7.2-3 with open vSwitch): The ICMPv6 NS (Neighbor Solicitation) packet does not seem to arrive inside the VM (it is a Cisco C9800-CL Wireless Controller) when the vNIC has "firewall=1" set. As soon as we remove the "firewall=1"...

Hello! Every couple of weeks various VMs tend to become problematic and their consoles show the following errors: Rebooting the VM fixes the issue. How do I diagnose what's going wrong? In that state of the VM, I'm unable to SSH into it. The Proxmox is installed on HP Proliant DL380e...

I am trying to setup proxmox to run windows vm that need to support nested virtualization and this is my first time using proxmox. I have ssd with windows 11 pre-installed. I pass through it via proxmox, set cpu type to Host, then started vm. It stuck on boot, causing cpu to reach 100%...

In our company today I tried to upgrade Proxmox from version 6.x to version 7. The upgrade completed correctly (via apt), but after GRUB, the monitor displays an Out of range message. I tried about 4 different monitors. All monitors showed a similar message (See Picture 2). The last screen I...

Hello, I have a small PVE cluster in the latest version. So I'm already on 7.0. The upgrade went perfectly. Yesterday a kernel update came out what I had installed and restarted. After this update, a USB NIC was no longer recognized and the vmbr Linux Bridge went down because the interface was...

From a pristine installation of Proxmox pve 6.4 from ISO, with just the following apt dist-upgrade reboot install ifupdown2 I just added a comment in the network configuration from the GUI, and applied. Changes results as follow: diff /etc/network/interfaces.original...

Hi, I have had my setup working fine for a long time and (updated recently) i have chosen to move a container to another node in the cluster. The migration works but i there is problems in controlling the container, like its running but shows as stopped, or no Ip address etc and it and a lot of...

Hello, ACME does'nt listen on port 80 in IPv6. It listen port 80 only in IPv4. For domain names with only record type AAAA, ACME does'nt work on Proxmox VE. I haven't software is listen on the port 80 in IPv4 or IPv6. I took a screenshot of the ACME logs and the "ss -atlp" command when...

I've just installed PBS and I'm trying to create a Directory on my 10TB Seagate IronWolf drive. Unfortunately, right when I'm issuing the create command, this happens: TASK ERROR: command "blkid" "-o" "export" "/dev/sda1" failed - status code: 2 - no error message Obviously, if I look into...

Hallo zusammen, ich möchte eine VM, die auf einem local ZFS Storage liegt auf eine andere Node migrieren. Sie hat eine Cloudinit-Disk an IDE2 angehängt, die ebenfalls auf dem lokalen ZFS liegt. In der GUI gibt es im Migrations-Dialog dann die Info, dass die lokale Cloudinit-Disk eine...

Hey, i recently noticed that im unable to Migrate VM to different nodes on my Proxmox Cluster. It doesn't matter if it is a Live or an offline Migration, both don't work. I tried different Storage types and tested the migration process from every node to every node. Syslog says that the task...

Hello, i'm testing PMG 6.2 and i active dkim for my domains, i create a selector : pmg, then, the gui generate in /etc/pmg/dkim/pmg.private the private key, and then i add the record in dns pmg._domainkey IN TXT "v=DKIM1; h=sha256; k=rsa...

Hi, I have a server running proxmox as virtualizer, recently I updated proxmox to 6.2-10 and after a bit I've started seeing some READ errors (with relative stutter on the web page) that quickly end up in a Error -5 and a "Shutting down filesystem" (VMs are still operational but proxmox is...

I got this error when trying to restore a vma.lzo backup on my PVE 6.2-4 pve-manager/6.2-4/9824574a (running kernel: 5.4.34-1-pve)

I am not sure whether this is the right place to address this, but we can figure that out together :) When trying to create a VM via the API following error is returned: 500 unable to create VM 109 - CT 109 already exists on node '' The PVE version I am using is: pve-manager/6.1-3/37248ce6...

Hi! I notice that on the new pve 6.0 with noVNC keys like ctrl, shift, and altgr get stucked in the vm when i press them longer then 2 seconds. For example when i press the shift for 2 seconds then i release it, after that every other key works like shift+KEY and i need to press once more the...

Hello all, I've recently upgraded my Proxmox host from 5.4 to 6.0. I installed originally from Proxmox ISO. Upgrade went fine, passed pve5to6 without warning. On first boot my when I started a container the green |> icon was not showing up. I've got 35 containers or so. All of my...

Hello, I recently upgraded Proxmox from 5.3 to 6.0 and the process went very smoothly. So first of all I wanted to thank the team for making the upgrade so easy. However I may have discovered a bug tonight when rebooting my server to replace a failed disk in my ZFS pool. Upon coming back up...

So i know that most people still have "ethX". But i like the "Predictable Interface Names" and therefore use them. Only my "new" chelsio cc2-n320e-rs dual 10g sfp+ card doens't play nice for some reason? It gives me a "renameX" interface. with is not editable in the GUI and is "random"...