Search results

Hi Fabian, thx for your help. Now i could create the LVM. If i try to migrate a VM or a LXC then i get "storage 'SSD-School' is not available on node 'pve02'" I had attached a screeshot

Sorry for the delay. The link that you had posted brings me not forward. This is a other situation with old mount points and so on. Storagetype is LVM. I don't understand the concept of the storages

Thanks for the solution this fix also my problem :-) Greate!

The Memtest was ok. We had the problem again. Reboot while finishing the installations. We have about 16 Machines finished and running. The Rest had problems to finish thought the reboot. In the Syslog i can see only the Info "--Reboot"

We could boot the server from a Stick https://sourceforge.net/projects/supergrub2/files/2.04s1/super_grub2_disk_2.04s1/super_grub2_disk_hybrid_2.04s1.iso/download With that iso a boot over the stick works till the next reboot. Now it should be easyer to repair. I was for me a shock that my...

I ran in the same problem yesterday and looked the whole evening to solve it. Hope the solution here helps me.

Hi, i hadn't found with googleseach or with the forumseach Informations that brings me forward. If there exists dozen answers please let me know where. You could see in my post that i had problems to define my problem exact, So why do you think that a seach with inaccurate information would be...

Hi, i have create a cluster with two nodes. I have a local Storage with the name SSD-School. If i want to mirgrate a container than i think i need a storage with the same name on the secound node, or? When i try to create an the secound node a Storage with the namen SSD-School i get "storage ID...

i a meeting today a colleague means that i also possiblem that we had a hardwareproblem. Next week we start a burnintest

Hi, Today we had tried the same procedure again. We had the same Situation again. While the second step in the installation process proxmox was away. (Current version 7.1.8) Regards Michael

Now i had analyzed the syslog. I can see that the System has been done a reboot at 9:39 till 9:45 (No Messages in the log in that time). After 9:45 i can see some Messages that looks like a proxmox boot. I cant't identify any failure.

We do that still today. After a systemcheck all machines are OK. All W11 machines in the state of the last configuration step with setup the region. More Infos in the evening. I had updates to 7.1.8. May it helps

Hi, i had installed with about 20 pupils a Windows 11 Pro/Edu. We had used a VM with Windows 11/2022 template, with 64GB Disk. All other settings was default. All installations was almost parallel. After the first reboot at the end of the installation proccess the Proxmoxsystem wasn't no longer...

Hi, i have a HP DL380 GEN8 Server with 256GB Ram, 40 CPU Cores and 2xRaid 1, 8TB HDDs 7.2K. (8x3,5" disksheph) We use that System for trainings. Our typical workload is that all user do the same things nearly at the same time. We think that our bottleneck is the disk system. I had checked the...

Seems that my message is rubbish. It seems that the networkport has been died. I had boot the system with a livelinux and i have the same problem. Other Switchport, other netcable,.. no effekt. Funny that the WLAN Stick work and the hardwaredefekt appears at the same time. Sorry for the effort!

Hi Dominik, Thx for the quick reponse. Here is the output of the ip commands Best regards Michael 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo...

Hello, i want to configure some VLANs. Then i want to bind a usergroup to a specified VLAN Interface. I want to make sure that only a usergroup can use the defined VLAN and not other. Is there a way to do that? regards Michael

Hi, i have running a proxmox 7 enviroment with the current lubuntu dist. with GUI as linked VM. On the localmachine are installed from https://www.spice-space.org/download.html the virt-viewer and the usbDK. Then i connect on the localmachine a TP Link TL WNWN722-N. Open the SPICE connection and...

Now i found the right way over the GUI. Select Pool View /Datacenter/Pools -> the pools are in listform. Select one and click "remove"

Yes i got it! pveum aclmod /pool/MyPool -group TheGroup -role Administrator