Search results

ref: https://forum.proxmox.com/threads/how-to-pass-vlan-0-priority-tags-to-pfsense-for-dhcp.112374/ I need to set a bridge flag to pass certain traffic to the vm. The problem is the bridge does not exist until *after* the vm is started. echo 8 > /sys/class/net/fwbr105i1/bridge/group_fwd_mask...

Speeding up *sense bootup doesn't really matter. The eapol auth requests come in about every 30 seconds none stop until authorized. The bigger issue is just sending something back to the host early on before the network is up. If wan can't dhcp then it stalls for about a minute. What other...

@vesalius Partial success. Adding post-up echo 8 > /sys/class/net/fwbr105i1/bridge/group_fwd_mask Sort of works. Specifically, it gets applied if the network is reloaded *AFTER* the vm is already started. On a cold boot, the bridge fwbr105i1 DOES NOT exist. Proxmox only creates that...

^^Thanks. Worth a shot. It is curious why you didn't have to set the flag on the fwbr interface while others did. Wonder what's different.

^^Yes, that's exactly how "interfaces" was configured, except no eapol traffic getting into the VM. *sense vm had the rg mac as its mac (where you have 00:00:00.... above). wpa_sup was failing, so tried tcpdump to monitor for eapol trafic... Nothing. Yet as mentioned before, it is being...

Thanks for the reply. Why haven't you pulled certs to get rid of the gateway entirely? The certs are in the vm. I'm not sure what I'm doing wrong, I'm just not getting the eapol traffic passed through to the vm. Nic - intel i211 Proxmox 7.2 pfsense + 23.01 opnsense 23.1 vm nic - virtio I can...

@vesalius, referencing post #2. Can you clarify how you defined everything in proxmox and *sense to get the vlan0 to be removed? I tried defining the wan nic (enp5s0) as enp5s0.0 in the bridge, but wpa_supplicant wasn't seeing the traffic. Att is the provider, with known good certs (working...

I wonder if the gpu passthrough issue is a function of the ASrock i5-1240p and would work correctly on a more traditional pc platform. Specifically, does the asrock have proper iommu groups? I recall running the iommu script on a 12700k/z690 board some months back to see how it broke down the...

Thanks for the clear instructions. Testing using a gt-710 card, b550 board, 5700g proc. GPU passed through successfully with no error codes in device mangler. I'm a bit puzzled by the last line, the snd-hda-intel.conf. Given you're using an amd platform, how is that applicable? thanks!

The wd550 is a basic consumer grade storage. It's just what I happened to have on hand when I built this thing. My usage isn't too heavy here. Most (all?) of those writes are from logs. The two ubuntu vm's are ext4, while truenas is zfs for the boot drive (which resides on the nvme). Sophos...

^^When you say pass the entire usb card, you mean controller or port?

Anyone?

What about "qm list" ?

I'm running a single node proxmox box. Proxmox and vm's are on a nvme ssd (1tb, wd sn550). Onboard sata controller is passed through to truenas for direct access to drives. Board (asus x570e) has 8 onboard sata ports, 4 in use now). So far this has been working out relatively well. There's 4...

Might be cheaper to keep your sanity and get a proper nic card? https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2322090.m570.l1313&_nkw=i340-t4&_sacat=0 These are server grade and will have great compatibility. The i219 is intel's consumer bastard child of sorts, probably great windows...

To the OP, googling that vid/pid comes back to an intel i219-v nic. Maybe there's some bios settings related to the nic that could be tweaked?

Here's the interface assignment. eth0 - virtio interface for main lan eth1 - virtio interface internal to proxmox only (does not bind to any physical nic), for nextcloud vm eth2 - wan, pcie passthrough for i211 nic samdung is a guest wifi ssid Disregard the physical port -x comments, that's a...

^^Google is your friend.. https://www.languageediting.com/format-numbers-eu-vs-us/ It'd be awfully cheap training for $30USD :)

Proxmox 6.4 Asus X570-e Motherboard Amd 5800x cpu 64GB ram I am running their linux version within proxmox itself (no container/vm). Using this 64 bit installer - https://www.cyberpowersystems.com/product/software/power-panel-business/powerpanel-business-4-4-0-linux/ . The issue is...

My vlan implementation is a little different. I'm using sophos utm (instead of __sense), and only have a single linux bridge (vmbr0) interface assigned for lan. Another interface is used in passthrough for wan. UTM was previously a vm under esxi. UTM is configured with 3 vlans - default...