Search results

Update - the Debian lxc has had the IP address changed in the same way.

I have 8.2.2 running in Intel NUC. I recently added a second NIC, USB C to LAN. I have an Ubuntu 24.04 lxc running and added second NIC. EHT 0 is on 192.168.1.0/24 network with IP fixed on router, works fine address 192.168.1.167. The second NIC I want to add on 192.168.2.0/24 network as...

Is Tailscale likely to cause any problems with upgrade process? Anyone done this with Tailscale installed on the host?

Solution on Reddit: https://www.reddit.com/r/Proxmox/comments/yn3vmn/restore_files_from_vma_backup/

I have an Ubuntu VM with additional virtual HD for temporary storage, I backup the VM regularly but not the virtual HD. I need some files from the backup. I restore, before starting I delete and readd the network adaptor to avoid IP conflicts. Also give it a new name. Starting the restored VM...

Thanks for the input and to finish the thread, I couldn't get my head round the instructions to expand the drive so decided to backup VM and CT, swap SSD, reinstall and restore. I had made minimal customisations to Proxmox so it wasn't hard to get back to where I was - Postfix, enable WOL and...

Thanks all for the input: Could this step: "- edit your partition table (move superblocks to the new end of the disk) - extend your partition" Be done with gparted?

I'm looking for more space on the OS SSD for VMs and CTs. The above approach looks quite complex. An alternative I was thinking off was a fresh install on the new bigger SSD - but if I do this how can I restore my settings? I've no problem backing up and restoring CT and VM, it's more the mail...

My OS drive is a 120 GB SSD and is getting full. The VMs and CTs are on a separate NVME. I Clonezilla'd OS the drive to a 500 GB SSD but the extra space is not available. How do I create more LVM-thin space?

Perfect thanks very much.

Using 7.2-3 - I have an NVME drive I was using for VM and CT. It has bad sectors so is to be returned. I wiped the drive ready for this, removed it, restarted to find no networking. Couldn't ping the router. Other than that from the terminal I established the system was running OK. I replace...

Just to finish this off in case anyone is interested or has a similar problem I think the problem was bad blocks on the NVME drive. badblocks -v /dev/nvme0n1 > ~/bad_sectors.txt found eight bad blocks. This site proved useful...

Ran smartctl -a /dev/nvme0n1 again - I must have missed below first time. SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 45 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage...

Somewhere in the midst of several reboots I am now on on version 7.2-3

The above has all the smartctl info, nil truncated. I removed the virtual 100 GB drive from the backup config and now I get a new error: ERROR: Backup of VM 105 failed - job failed with err -61 - No data available Googling this leads to several dead ends. Reboot does not change anything and I...

root@pve:~# smartctl -a /dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.30-2-pve] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: ShiJi 1TB M.2-NVMe Serial Number...

I take it you mean out of memory killer? I'm not sure how to monitor system resources but it is an Intel i7 11 gen with 1 TB NVME and 32 GB ram so not short on resource. The qm config is: root@pve:~# qm config 105 agent: 1,fstrim_cloned_disks=1 boot: order=scsi0;net0 cores: 8 memory: 8192...

Using 7-1.12. Backup of Ubuntu VM repeatedly fails with error 125 at 65% - same with stop and snapshot backups, same with local and two LAN storage drives. LXCs backup without error. Trying to clone the drive also fails. Any advice appreciated. VMID NAME STATUS TIME SIZE...

Thanks, this sorted it, I was caught out as I'd installed several VMs before and this didn't happen.

Using Proxmox 7.1-12 setup 80 GB Ubuntu Jammy server but only half of the drive space is available - puzzled as to why this is? root@jammy:~# df -h Filesystem Size Used Avail Use% Mounted on tmpfs 796M 9.0M 787M 2% /run...