Hat einwandfrei funktioniert und sollte eine Standard Anleitung sein. Danke Dunuin
Gibt es eine Möglichkeit beim Upload den Umweg über tmp zu umgehen? Bei großen Images läuft mir nicht der ISO Storage voll, sondern die Platte wo der Upload erst einmal abgelegt und danach rüber kopiert wird.
Ich...
Guten Morgen,
bei der ersten Installation von Proxmox habe ich leider einen zu kleinen Speicher für den ISO Storage angelegt.
Würde ich das System heute aufsetzen, wäre ich natürlich schlauer ^^
Ich habe auf dem Proxmox System aber nun jede Menge Sachen laufen und suche nach einer anderen...
Bitte sehr
Linux proxmox 5.11.22-7-pve #1 SMP PVE 5.11.22-12 (Sun, 07 Nov 2021 21:46:36 +0100) x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright...
Hi,
nach dem Boot von 7.0-14+1 bekomme ich auf der Console Fehler
Alle paar Sekunden kommt die gleiche Meldung wieder.
Wie kann ich das beheben?
Danke!
Internal NIC 192.168.1.14
Bond 192.168.1.17
Both are in the same subnet.
In the VM configuration I can say the VM which bridge to use and this way define the network cards and route.
For the Proxmox to PBS backup I see no way to do this so far.
Sure I can change the setup e.g. set a vlan or...
Kein Mirror, kein Raidz, alles Single Device Konfiguration.
Ich dachte der SSD Cache schreibt einfach nur mit und wenn die Last kleiner ist, die Daten dann vollständig weg.
Im laufenden Betrieb geht da nichts verloren (USV), außer natürlich die Platte selbst steigt aus.
Oder meinst du dass das...
Thats what I did. The bond has a different IP and I created a storage PBS entry with this one.
Problem is not on the PBS side, the problem is on the PVE side.
PVE still wants to use his internal nice and not the bond.
What I want is:
PVE BOND ---> PBS BOND
Atm it is:
PVE internal single nic...
Hi,
I have 2 networks cards in my PVE and also in my PBS.
1x internal network card - should only be used to access the gui or for smaller containers
1x 2GB interface configured as 802.3ad bond.
I have seen that my PVE is using the internal nic to send data to my PBS.
What I want is that for...
Hallo,
Ich habe im PVE und PBS jeweils eine zusätzliche NIC verbaut.
Proxmox und Proxmox Backup Server haben nun 3x 1GB NICs.
Diese habe ich über ein BOND gebündelt.
1. Versuch
Alle auf 802.3ad gestellt und dies in meinen Switches aktiviert
Ich habe verstanden das dies die Bandbreite auf 3GB...
Ok what I have done so far:
I have installed an additional 2 port network card to PVE and PBS and enabled LCAP 082.3ad on both of them.
I have reconnected the PBS to the PVE using the new IP
The bond is working and using Layer 3+4 which was giving me good performance with 'iperf'.
The backup...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.