Recent content by ioo

Hi! I have very good user experince with pve + pbs solutions and thanks for the good software! Currently pbs system runs on system like - server: PRIMERGY RX2530 M7S - cpu: 2 x Intel GOLD 6548Y+ (core/threads 32/64 per cpu) - memory: 512 G DDR5 - storage: 10 x 15 TB Micron 7450 nvme devices -...

Hi! I think i would benefit from using zfs-over-iscsi storage option because of snapshot capability, and in spite of storage being single-point-of-failure. Also i feel that storage solution not having at client i.e. pve node ordinary /dev/sdb, /dev/sdc etc device abstraction related to it...

Hi! I think everything is behaving well but i would still like to ask for confirmation. As starting point there is PVE v. 7 cluster and intent is to upgrade it to v. 8. It will go node by node. I thought to secure my upgrade attempt so 1. i am arriving to next pve node i am going to upgrade 2...

Hi! I would like to ask about one phenomena which does not excatly break anything but is at times unconvinient. I have encountered it several times so i dont think it is specific to my particular case. block device is connected over iscsi to multiple pve cluster nodes and on this block device...

Hi! At some occasions i moved stuff around between namespaces like this 1. made sure there is no active backup/verify/etc jobs running 2. stopped pbs processess like 'systemctl stop proxmox-backup proxmox-backup-proxy' 3. at command line moved group directory to new namespace, like 'mv...

Hi again! Actually i am thinking of kind-of-one-pve-cluster what has two so to say inner islands i.e. two sets of nodes residing at very well connected different physical locations (say at one site its set having 6 nodes, and the other 5 nodes). And nodes of one island are connected over iscsi...

Hi! I have run dual-primary drbd successfully with two node proxmox cluster, each pve node being also drbd node (and using local storage). And /dev/drbd0 block device is used as lvm pv device, lvm needs to be initialized at one node since block device content appears or rahter is same and both...

Hi! I must first say i am no seasoned network card virtual functions user but generally feel virtual-functions-and-co would be important thing tomorrow so for no very particular reason i try them out in different combinations. As staring point i had working setup like this with pve v. 8.2 using...

Hi! Just wanted to say thanks, in PVE v. 8.1 (and in PBS v. 3.1) i see secure boot and kernel lockdown behave to my mind exactly as expected! Best regards, Imre

Hi! I apologize to open up another lot-discussed-topic, at the moment everything looks to me working well but still i would like to get confirmation if my thinking is good and specific configuration is good. My effort is computer has four physical interfaces and two of them are 10g and...

Hi! First i apologize because this topic is much discussed already (and i tried and read thru posts). I think everything behaves as expected and well in my test lab but i would like still ask you to confirm my understanding. I have multinode (23) pve v. 6.4 cluster without HA turned on and it...

Hi! I think everything runs smooth but i would like to get confirmation if it is really ok. Setup has flash devices (actually nvme samsung and kioxia) and they are directly running on pcie (i.e. without some kind of raid controller etc although raid controller setup + nvme seems to be rare case...

Hi! I see this topic is 'solved' but if i may i temporarily would open it again. I am not very seasoned secure boot user but still from time to time i take interest in sb. Somehow randomly i stumbled to observe phenomena that running blktrace/blkparse is not successful (why i took interest...

Hi! Everything went as expected and very well. Thank you very much for your answer on my particular concern and more general comment! (I next try to mark this thread as 'SOLVED'). Best regards, Imre

Hi! I think everything is under control but i would like to ask for confirmation that this is expected thinking-behaviour-etc of PVE cluster. Events happen in 20-ish node non-HA-configured v. 6.4 cluster (and also VM's are not configured to start automatically). Starting point is all nodes are...