Recent content by amlanhldr

An old thread to answer, but still might be useful for someone.. First of all install lm-sensors. Make sure you can see temp from sensors command. Mine looks like below: # sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +67.0°C (high = +80.0°C, crit = +100.0°C) Core 0...

To avoid the ENTERPRISE REPOSITORY warnings, you may disable the repos, until you are not using them. go to Datacenter>[Node]>Updates>Repositories, click both the Enterprise repos and Disable it. For apt-get warnings... do you have proper connectivity to the proxmox host? 1) can you ping...

I have 2 VMs scheduled for a backup job in Stop Mode and I want not to run any of them while the backup job is still running. I think I have to play around the scripts, but cannot find a good way to start.

Thank you for the tip. I almost missed the idea of import. Yes this pool was created later for additional storage only. And I'm buying this. :)

Hi, I'm planning to install Proxmox 8 over 7. For now I've 1 disk created in a zfs pool (single disk mode). Now when I'll boot the new system, I'll have to create everything again, and I highly doubt creating a new zfs pool on the existing disk will erase the drive all together. How can I save...

well after a year, following the thread, but no success. I find no real diff in conf from above, but no luck. The status is COMMLOST. The configs are as follows: On host: # ls -al /dev/bus/usb/002/ total 0 drwxr-xr-x 2 100000 100000 80 Oct 13 23:27 . drwxr-xr-x 6 root root 120 Oct...

Hi @Fabian_E , Thank you for quick and detailed response. I have few more queries though.. So far I understand, I initially have created the VG, the root directory and thinpool 'data' under that VG. Now the thinpool 'data' has around 151G and all the other logical volumes are inside that...

Hello All, I'm doing things on proxmox since a few weeks. So treat me new on these things. Coming to the point, whenever try to create a new LV or try to create a Snap or backup, I get warnings... WARNING: You have not turned on protection against thin pools running out of space...