kernel error 15

[stlsaint]

Sup folks,
So i had a power outage on my server (i know i had no UPS)
But now i get this error whenever i try and boot:

Booting 'Proxmox Virtual Environment, kernel 2.6.32-3-pve'

root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-2.6.32-3-pve=/dev/mapper/pve-root ro

Error 15: File not found

Press any key to continue...

This is a similar issue ive seen before in linux and it always ended up being a fstab issue. I can boot to my older kernel but nothing works...cant start containers or anything. The newer kernel get me the error above? Thoughts/ideas?

 

[udo]

Sup folks,
So i had a power outage on my server (i know i had no UPS)
But now i get this error whenever i try and boot:

Booting 'Proxmox Virtual Environment, kernel 2.6.32-3-pve'

root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-2.6.32-3-pve=/dev/mapper/pve-root ro

Error 15: File not found

Press any key to continue...

This is a similar issue ive seen before in linux and it always ended up being a fstab issue. I can boot to my older kernel but nothing works...cant start containers or anything. The newer kernel get me the error above? Thoughts/ideas?

Hi,
your /boot/grub/menu.lst are wrong!
Use something like this:

title           Proxmox Virtual Environment, kernel 2.6.32-3-pve
root            (hd0,0)
kernel          /vmlinuz-2.6.32-3-pve root=/dev/mapper/pve-root ro 
initrd          /initrd.img-2.6.32-3-pve

Udo

 

[stlsaint]

Hi,
your /boot/grub/menu.lst are wrong!
Use something like this:

title           Proxmox Virtual Environment, kernel 2.6.32-3-pve
root            (hd0,0)
kernel          /vmlinuz-2.6.32-3-pve root=/dev/mapper/pve-root ro 
initrd          /initrd.img-2.6.32-3-pve

Udo

Hi and thanks for the reply but that is the exact same entry i have in my menu.lst and it does not as i get the error i originally posted.

 

[stlsaint]

This is what my fstab shows:

# <file system> <mount point> <type> <options> <dump> <pass>
/dev/pve/root / ext3 errors=remount-ro 0 1
/dev/pve/data /var/lib/vz ext3 defaults 0 1
/dev/sda1 /boot ext3 defaults 0 1
/dev/pve/swap none swap sw 0 0
proc /proc proc defaults 0 0

 

[stlsaint]

After more hours wasted troubleshooting i have decided to just do a complete fresh install
thanks for help though