Hello! I just migrated from a Fedora/KVM setup to ProxMox and It was a painless setup. I did have tiny bit of trouble getting past "code 43" with NVidia. (On Fedora I COULD NOT use q35, in ProxMox, I HAD TO, and I also NEEDED the pci=1 line). But I got that resolved. The last piece of hardware I want to get working again is my BD/DVD Drive.
In KVM in my domain I used the following to pass through my drive:
Find SCSI #:
Edit Domain XML and add this:
Note: Replace scsi_host# with the # found in lssci
I had to force the XML to be accepted as virsh edit gave errors, just press i and then reboot vm to test.
Can anybody help me figure out how to add this to the conf file in ProxMox? I'm thinking it needs to go in args:, but I can't seem to convert it to qemu cmdline argument. Thanks!
Note: This is required to get the Windows VM to recognize the drive as a "real" drive not a "qemu" drive.
In KVM in my domain I used the following to pass through my drive:
Find SCSI #:
Code:
lsscsi
[root@kvmatrix ~]# lsscsi
[#:0:0:0] cd/dvd HL-DT-ST BD-RE WH14NS40 1.03 /dev/sr0
Edit Domain XML and add this:
Note: Replace scsi_host# with the # found in lssci
Code:
<controller type='scsi' index='0' model='virtio-scsi'/>
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host#'/>
<address type='scsi' bus='0' target='0' unit='0'/>
</source>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
I had to force the XML to be accepted as virsh edit gave errors, just press i and then reboot vm to test.
Can anybody help me figure out how to add this to the conf file in ProxMox? I'm thinking it needs to go in args:, but I can't seem to convert it to qemu cmdline argument. Thanks!
Note: This is required to get the Windows VM to recognize the drive as a "real" drive not a "qemu" drive.