usb

I have a question very similar to this one: Pass USB Device to LXC I have my externel disk enclosure that is plugged in USB on host: root@pve:~# lsusb Bus 004 Device 006: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge...

This is my first message - hello everyone. I have encountered a problem and I have no clue what caused it or how to prevent it happening. Let me describe the situation in details. Given: Dell 3020 box, 16GB RAM, 250GB SSD. Running Proxmox 8.1 without subscribtion. Under Proxmox is a single...

Hi, I have a monitor that has several built-in hubs (and a loudspeaker). I connect the monitor using a USB-B 3.0 cable to my Proxmox machine (latest version). I want to passthrough everything the monitor has to offer with regards to USB connectivity. This is the lsusb -tvv output of the...

Hello, for a few hours I am trying to passthrough my 3D Printer to my Octoprint Container. But I can't get it to work - the main Problem is that after adding this to my container config in Proxmox: lxc.cgroup2.devices.allow: c 189:* rwm lxc.mount.entry: /dev/bus/usb/002/008 dev/bus/usb/002/008...

Hi, I have several proxmox nodes that are working well. I am using a Wifi USB Stick to temorary passthrough to defined VMs for installing updates over the internet. This concept works also quite well for me. However, lately I took an old Fujitsu Siemens Machine, also with Proxmox to be used...

Hello, I have the project to create HA with 3 hypervisors Proxmox. I want to install CEPH to dot that thing. i also want to install some paquets on my VM. I don't have access to internet via a switch, and my hypervisors doesn't have internal wifi card. I want to create a router on a Zorin VM...

Hi, I'm trying to bind mount an exFAT 5 To Western Digital Essentials Drive which i previously use for my Mac and Windows PC so I have a lot of data on it. I just noticed that the new Western Digital HDDs are soldered to the USB port. What a hell ! Because i don't have a lot of money for the...

I'm new to proxmox and I've installed it onto a machine with only one drive for boot (small SSD) and then separate storage disks. I was wondering if there is an easy way to backup the current set-up to a USB disk so that it boots up proxmox exactly the same in case of boot disk failure?

I have a proxmox container running Fhem (to control my thermostat valves). U used this: https://tteck.github.io/Proxmox/ (Fhem) The container is Privileged and the connected usb device is found (to control the thermostats) When i type in this command, i get the following result: ls -l...

Just written down for your amusement, on a lazy, dark and rainy Sunday afternoon: Someone (me) might try to extend a Ceph cluster by adding NVMe (or other SSDs) via USB3 Adapters. For a small homelab this should be feasable, isn't it? My three PVE nodes already run a single Ceph OSD on an...

I am having trouble creating an iso of a 2TB drive partition. I've tried Ubuntu disk tools but the iso would be larger than my 2tb usb drives and not allowed to proceed. Is it possible to directly import from a bootable usb drive with the proxmox web interface?

Hi, Does anyone knows how to passthrough camera from my Windows through RDP to Ubuntu 22.04, I know that this is not that much related to the ProxMox, but my Ubuntu 22.04 is on the ProxMox 7.4-3, and I saw some comments online that people did it through USB being added to the Ubuntu in the...

Hi everyone, I have an HP Elitedesk 800 G6 Mini running Proxmox 8.1. I have two external EXT4 SSD drives attached and assigned to my Ubuntu Server 23.04.3 VM. When attempting to transfer files between both drives on the VM, the VM will crash. A certain number of files will transfer before it...

hi, good evening, i hope someone can helpme, im new using proxmox. i have a mainboard asus tuf z590 plus wifi with an i5-11600k, it has a usb controller 3.2 2x2, i install the proxmox 8.1 and i have update upgrade everthing i can. i was trying to use an usb type c port that runs on 20gbps and...

Hello, on my PVE I have a USB HDD connected for Backups, ISOs, Templates and such... I just replaced an old drive with a *brand new* 4TB Seagate BarraCuda HDD in an external (powered) USB3 enclosure. Today I received an email notification with the subject "SMART error...

Hey everyone, i have a running PBS with an external USB hard drive mounted under /media/usb-pbs where all backups are stored. After the system was switched off for two weeks and I changed the static IP address of the PBS, the corresponding data storage is shown as "not available" in the user...

Trying to install TAILS with persistence...seems like an obvious enough thing to do, right? It keeps saying there's no device for persistence, I've tried it with a scsi disk, remapping to a usb disk, and as a usb disk, no dice. Any ideas? I'm going to do some prodding after I reboot the...

Hallo #zsmmn Ich möchte die Oberfläche einer Windows 11 VM auf einem Monitor über HDMI ausgeben. Habe keine dedizierte Graka. Nach einlesen scheidet für mich das gefrickel der IGPU Ausgabe aus. Habt Ihr Erfahrungen mit USB-HDMI Adaptern?

Hello Proxmox Community, I am reaching out for assistance with a tricky setup I'm working on. My goal is to pass through an Elgato Camlink 4K device (eventually two, but currently testing with just one) to a virtualized Ubuntu instance for OBS streaming. Despite various attempts, I'm stuck with...

Hello community, I have recently installed the latest version of Proxmox and restored all my VMs into a clean pool. No hardware or hardware configuration was changed on the system. So some strange reason one of my Bluetooth devices (USB) is not available for the host anymore, and by that I mean...