Latest activity
-
JJohannes S reacted to GMBauer's post in the thread ISO9001, hier: Wöchentlicher Test auf Wiederherstellung? with
Like.
Grüeziwoll beinand, in unserer Firma kommen wir leider um eine ISO9001-Zertifizierung nicht mehr rum. Nun möchte der Tester (TÜV Süd) ein Protokoll für einen wöchentlichen Test der Wiederhestellungsfähigkeit von VMs. a) Ich lasse jede Woche... -
Jjtru replied to the thread ISO9001, hier: Wöchentlicher Test auf Wiederherstellung?.Ja klar ist es das, aber spielt das fuer die extrabuerokratische Extrabetuedelung des Auditors denn eine Rolle? ;) Ein Mal nach Inbetriebnahme, wenn es dazu einen konkreten Anlass gibt (= Applikation ist in irgendeiner Weise so besonders, dass...
-
GGMBauer posted the thread ISO9001, hier: Wöchentlicher Test auf Wiederherstellung? in Proxmox Backup Server (Deutsch/German).Grüeziwoll beinand, in unserer Firma kommen wir leider um eine ISO9001-Zertifizierung nicht mehr rum. Nun möchte der Tester (TÜV Süd) ein Protokoll für einen wöchentlichen Test der Wiederhestellungsfähigkeit von VMs. a) Ich lasse jede Woche...
-
Ffabueno posted the thread Proxmox VE 9.X and Commvault ? in Proxmox VE: Installation and configuration.Hi everyone, we’re preparing to migrate from VMware to Proxmox VE and have some questions about the compatibility of Proxmox VE 9.X with our Commvault backup tool. We initially opted for a Thick LVM configuration via iSCSI with disks in RAW...
-
Mmarkus7220 replied to the thread pve-firewall log: "value does not look like a valid IP address or CIDR network".Appreciate the quick answer @abied-charreton. root@pve:~# pveversion -v proxmox-ve: 9.2.0 ... proxmox-firewall: 1.2.3 ... pve-firewall: 6.0.6 Do you mean those values under [VM ID] > Firewall > IPSet > ipfilter-net0 ? Yes, multiple VMs have...
-
SStereoscope posted the thread Installation Errors Out Randomly in Proxmox VE: Installation and configuration.I'm trying to install 9.2-1. I've: sudo cmp -n $(stat -c '%s' path/to/proxmox.iso) path/to/proxmox.iso /dev/sdX Where sdX is the bootable Proxmox SD card. This command returned no errors. When I try installing Proxmox, it gives me: Where...
-
Cccnet replied to the thread Error on S3 datastore during backup.Thank you. I will wait.
-
Uunterkomplex replied to the thread lxc-info stops working with supervisor read access in kernel mode.Hi I see no relation to a storage issue here, just a kernel oops. Any reason why you think replacing the cable would help us investigate?
-
news replied to the thread lxc-info stops working with supervisor read access in kernel mode.Now i think of a new BIOS, the german website shows: BIOS Update 6.82 MB, FFCN21WW, 17 Jun 2022 But i found only a winos exe. #... -
K@keeka @deebsr a short update: I reported this upstream as a regression in the stable kernels, and the NFS server maintainers confirmed the cause. A fix that was backported into stable Linux 7.2.4 (and the matching 6.18 kernels) leaves the ID in...
-
Hhannz replied to the thread Proxmox VE 9.2 cluster loses Corosync/KNET connectivity to both remote nodes when starting a VM over LACP/MLAG.try setting the corosync IP addresses on vmbr0.720 interface instead? or under vmbr0 config, change bridge-vids 2-4094 to bridge-vids 2-719 721-4094 and see if it occurs again
-
BBu66as reacted to masterjanic's post in the thread [TUTORIAL] proxbase: lokale Proxmox-VE-Testcluster per CLI (Open Source) with Like.
Dankeschön für das Feedback. Also Version pinnen gibt es schon als Parameter, jedoch für die Minor Releases, bei den Majors von 8.x auf 9.x sind teils große API-Unterschiede und es war mir zu viel Aufwand das zu berücksichtigen bei der ersten...
-
Pphilippms replied to the thread (Configure) Retries during backup?.Yeah, Change Detection may work if a previous backup exist - but in our scenario there is no such previous backup, we are transferring data just to archive them to tape. Thank you for the bugzilla link - such a checkpoint feature would be like...
-
abied-charreton replied to the thread pve-firewall log: "value does not look like a valid IP address or CIDR network".Hello, which pve-firewall version do you currently run? (pveversion -v)? Also, do you have any ipfilter-* IPSets with alias members defined in some guest firewall configs? -
Mmasterjanic replied to the thread [TUTORIAL] proxbase: lokale Proxmox-VE-Testcluster per CLI (Open Source).Dankeschön für das Feedback. Also Version pinnen gibt es schon als Parameter, jedoch für die Minor Releases, bei den Majors von 8.x auf 9.x sind teils große API-Unterschiede und es war mir zu viel Aufwand das zu berücksichtigen bei der ersten...
-
Uunterkomplex replied to the thread lxc-info stops working with supervisor read access in kernel mode.Hi, This is a repurposed Laptop with AMD Ryzen 4700U (Yoga 6 13ARE05). I have two HDDs and one SSD connected via USB. As far as I can tell there are no issues with the storage: read and write still works normally and zpool statusshows no issues...
-
Iinfoplus replied to the thread Dell PowerVault ME5024 iSCSI Performance: High Latency Spikes and Low Sequential Throughput on PVE 9.hello @pscomputing, it seems I solved the problem, I did some changes and now the latency is low and the throughput is high, I hope it will be persistent. What I changed is: The vlan system: before I had the ports in the switch set in trunk...
-
Mmarkus7220 posted the thread pve-firewall log: "value does not look like a valid IP address or CIDR network" in Proxmox VE: Networking and Firewall.Hello, above error currently pollutes my machine's log with 24 log entries every 10 seconds. These are all shown via journalctl, MyNode > System > System log and pve-firewall: root@pve:~# pve-firewall status value does not look like a valid IP...
-
news replied to the thread lxc-info stops working with supervisor read access in kernel mode.Good morning do you use a Mini PC? Can you tell us which one? Are all of your drives and zfs Pool alive?
-
UdoB reacted to masterjanic's post in the thread [TUTORIAL] proxbase: lokale Proxmox-VE-Testcluster per CLI (Open Source) with Like.
Hallo zusammen, ich möchte euch ein kleines Open-Source-Projekt vorstellen, das wir bei virtbase entwickelt haben: proxbase. Das ist ein CLI-Tool, das auf dem eigenen Rechner vollständige Proxmox-VE-Cluster zum Testen aufsetzt. Warum wir das...