Latest activity
-
OOnslow replied to the thread Proxmox forum administrators, please increase maximum character count per post from 16KB to 128KB, thanks !.I don't want the forum cluttered with posts sized up to 128 KB.
-
OOnslow reacted to bbgeek17's post in the thread Proxmox forum administrators, please increase maximum character count per post from 16KB to 128KB, thanks ! with
Like.
All the LLMs have the very useful "sceptic" mode. I find it invaluable. In fact pitting one against the other often gives you a more refined result. Overengineered: Excessive code for a simple task, including custom TTY detection and ANSI color... -
OOnslow reacted to AlexHK's post in the thread Does Proxmox Mail Gateway support FC connection between Synology RS4826xs+ and Dell PowerEdge 660xs? with Like.
In addition, I'd like to add that you can install/run PMG on top of standard Debian by using the proxmox-mailgateway-container meta package (despite the name it doesn't have to be installed on a container). So if for some reason the PMG ISO...
-
Mmasterjanic posted the thread [TUTORIAL] proxbase: lokale Proxmox-VE-Testcluster per CLI (Open Source) in Proxmox VE (Deutsch/German).Hallo zusammen, ich möchte euch ein kleines Open-Source-Projekt vorstellen, das wir bei virtbase entwickelt haben: proxbase. Das ist ein CLI-Tool, das auf dem eigenen Rechner vollständige Proxmox-VE-Cluster zum Testen aufsetzt. Warum wir das...
-
OOnslow reacted to tomservo's post in the thread Clarification on ZFS Encryption at Rest – Proxmox VE 9.2.3 with Like.
You should consider some side effects of using encryption in different ways. Is it ok for all the VMs to share the same key? Is it ok for all the hosts to share the same key? Do you actually need the hosts encrypted too? Is it ok for the...
-
EErnie95 replied to the thread Memory cgroup out of memory : how to understand it ?.Yes potentially an update of pulse via the webgui has not worked properly, but I didn't track when I did it (same date of the issue or before or after). Here are the results of the commands : systemctl status pulse-update.service *...
-
SStereoscope replied to the thread Default Block Size.Because I want to know what block size that dataset represents and isn't the generic local-zfs name. I don't want to use the name local-zfs in any of my setup because if Proxmox changes the default value in the future, then I potentially see...
-
SDoes Proxmox need a local-zfs with default Block Size settings anywhere? Or can I re-name it and specify a custom Block Size?
-
BWenn die identischen Kisten sauber laufen und nur die eine nach jedem Boot rumzickt, würd ich erst mal Kabel, Switchport und Autoneg checken, nicht Kernel oder Treiber. Was zeigt denn ip -br link und ethtool <nic> direkt nach dem Boot, also bevor...
-
BKleiner Typo: du hast ethtool enp0s31f5 getippt, die NIC heißt aber enp0s31f6. Darum kommt nur "No such device". Der erste Screenshot ist aber interessanter. Nach dem Boot gibt es vmbr0 gar nicht und die NIC ist ohne Carrier DOWN. Das hat nichts...
-
Sshodan replied to the thread Proxmox forum administrators, please increase maximum character count per post from 16KB to 128KB, thanks !.Ok well, I tested the new version init_colors(){ if [ -t 1 ] && [ -z "${NO_COLOR:-}" ]; then RED=$(printf '\033[31m'); GREEN=$(printf '\033[32m'); CYAN=$(printf '\033[36m'); BOLD=$(printf '\033[1m'); RESET=$(printf '\033[0m'); else RED=...
-
-
Sshodan replied to the thread Proxmox forum administrators, please increase maximum character count per post from 16KB to 128KB, thanks !.You're in luck then because this actually changes 45 pages of code into a 7 lines code block
-
FFrank-75 replied to the thread Problem with MegaRAID SAS3508 controller.Good morning, I have a Fujitsu PRAID CP400i controller based on the LSI SAS3008 chipset (equivalent to the LSI SAS 9300-8i HBA). Proxmox is installed on a SATA SSD connected to the motherboard's onboard controller, while the PRAID CP400i...
-
-
PPengTan replied to the thread Proxmox VE 9.2-1 ISO not installing in nested Hyper-V.+1 Met the same issue, 9.1 works, 9.2 fail
-
UdoB reacted to bbgeek17's post in the thread Proxmox forum administrators, please increase maximum character count per post from 16KB to 128KB, thanks ! with Like.
I think enough tokens were spent on this banter. Best of luck! Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
UdoB reacted to tomservo's post in the thread Clarification on ZFS Encryption at Rest – Proxmox VE 9.2.3 with Like.
You should consider some side effects of using encryption in different ways. Is it ok for all the VMs to share the same key? Is it ok for all the hosts to share the same key? Do you actually need the hosts encrypted too? Is it ok for the...
-
AlexHK replied to the thread Does Proxmox Mail Gateway support FC connection between Synology RS4826xs+ and Dell PowerEdge 660xs?.In addition, I'd like to add that you can install/run PMG on top of standard Debian by using the proxmox-mailgateway-container meta package (despite the name it doesn't have to be installed on a container). So if for some reason the PMG ISO... -
Kleiner Typo: du hast ethtool enp0s31f5 getippt, die NIC heißt aber enp0s31f6. Darum kommt nur "No such device". Der erste Screenshot ist aber interessanter. Nach dem Boot gibt es vmbr0 gar nicht und die NIC ist ohne Carrier DOWN. Das hat nichts... -
PPengTan reacted to fabian's post in the thread Proxmox VE 9.2-1 ISO not installing in nested Hyper-V with Like.
https://bugzilla.proxmox.com/show_bug.cgi?id=8027
-
EllerholdAG reacted to bbgeek17's post in the thread Proxmox forum administrators, please increase maximum character count per post from 16KB to 128KB, thanks ! with Like.
I think enough tokens were spent on this banter. Best of luck! Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
