Latest activity
-
Abobakr replied to the thread proxmox-backup-manager acme account register behind proxy.Regarding harica, you can refer to the bugzilla entry [0], there's a patch submitted for improvement from VPE side [1]. [0] https://bugzilla.proxmox.com/show_bug.cgi?id=7948 [1]... -
MLike this but give these a read too (in your case a bit redundant, but still) - https://gist.github.com/Impact123/3dbd7e0ddaf47c5539708a9cbcaab9e3#fixing-a-full-storage -...
-
Wwech replied to the thread Cephx Key Migration Procedure and Ceph 19.2 Squid Going EOL Soon.Exactly. This is the reason I want to upgrade from proxmox 8 to 9. But I have upgraded a test proxmox cluster a few weeks ago where I had tested the upgrade process to proxmox 9 and it now offered the ceph upgrade from 19.2.3 to 19.2.6 which...
-
SteveITS replied to the thread Cephx Key Migration Procedure and Ceph 19.2 Squid Going EOL Soon.Technically speaking (in my opinion) the upgrades (to latest 19 or 20) are unrelated to this key rotation issue. Though it might be good to link to the instructions in case people upgrade from older Ceph 19 to 20. You can just ignore the... -
UdoB reacted to proxuser77's post in the thread Proxmox VE 7 is vulnerable to some type of 0day/RCE non auth with
Like.
PVE 7 is the second-to-last version. We’re now on version 9, and I think version 8 is also nearing end of life, or has it already reached it? I’m not 100% sure. Either way, the longer you wait, the more complicated and time-consuming it’ll be to... -
UdoB replied to the thread Proxmox VE 7 is vulnerable to some type of 0day/RCE non auth.https://forum.proxmox.com/threads/proxmox-ve-support-lifecycle.35755/
-
UdoB reacted to Johannes S's post in the thread Proxmox VE 7 is vulnerable to some type of 0day/RCE non auth with Like.
Another option would be to run a PVE7 VM inside your PVE9 host. Obviovusly this would be a bad idea for VMs performancewise. For VMs it's best to migrate them to your new host and be done with it. But if you happen to have some old containers...
-
Sseroal posted the thread Herausfinden, wer eine Mail aus dem Spool gelöscht hat in Proxmox Mail Gateway (Deutsch/German).Hallo zusammen, kann ich irgendwie nachvollziehen, von wem/durch wen der Postuser Befehl ausgeführt wurde, welcher zur Löschung einer/bestimmter Mails führte? 2026-09-23T08:56:34.108282+02:00 mail postfix/postsuper[1701459]: 7AD18341A5: removed...
-
Ttrev458 posted the thread GRUB "no server is specified" / can't boot after extending pve/root LV onto second disk — bug ruled out in Proxmox VE: Installation and configuration.Setup: Proxmox VE, boot disk originally a 128GB drive (/dev/sda, GPT: sda1 BIOS boot, sda2 ESP, sda3 LVM member) pve VG originally lived entirely on sda3 Recently extended pve VG by adding /dev/nvme0n1p1 (a separate ~128GB NVMe) as a second PV...
-
FHello, I'm building a project using iPXE and I've encountered a strange issue (although I'm not sure whether it's actually an iPXE bug). I have an iPXE server and use it to boot VMs into both Windows 10 PE and Windows 11 PE. When I boot Windows...
-
-
Francois Baillargeon replied to the thread ceph public MTU from 1500 to 9000.Adding to that, it raises latency a bit too to have bigger frames, testing would give you the real answer if you are unsure. -
Francois Baillargeon reacted to traveltrex's post in the thread ceph public MTU from 1500 to 9000 with Like.
Thank you for your advice. We will keep the MTU 1500 then.
-
Ttraveltrex reacted to Francois Baillargeon's post in the thread ceph public MTU from 1500 to 9000 with Like.
Honestly, it's more trouble than worth, we had zillions of times when "Configured correctly " did not pass pass the ping -M do -s 8972 [destinationIP]test All moderns switch ASICS can do line speed with regular frames, and most NICs have...
-
Ttraveltrex replied to the thread ceph public MTU from 1500 to 9000.Thank you for your advice. We will keep the MTU 1500 then.
-
Rramakrishnan1996 replied to the thread Memory ballooning.But still the memory consumption was high inside the windows vm. It was running at 50% at idle
-
Rramakrishnan1996 replied to the thread Memory ballooning.Yes dear. I have installed the drivers and also validated the ballooning and qemu services are up and running.
-
Francois Baillargeon replied to the thread ceph public MTU from 1500 to 9000.Honestly, it's more trouble than worth, we had zillions of times when "Configured correctly " did not pass pass the ping -M do -s 8972 [destinationIP]test All moderns switch ASICS can do line speed with regular frames, and most NICs have...
-
JJohannes S reacted to proxuser77's post in the thread Proxmox VE 7 is vulnerable to some type of 0day/RCE non auth with Like.
PVE 7 is the second-to-last version. We’re now on version 9, and I think version 8 is also nearing end of life, or has it already reached it? I’m not 100% sure. Either way, the longer you wait, the more complicated and time-consuming it’ll be to...
-
Rramakrishnan1996 replied to the thread Memory ballooning.For linux vm it was working fine with minimum and maximum as 1:4 ratio. But for the windows vm its not working as expected. Someone please help me to configure successful memory ballooning in proxmox cluster.
-
IITCowboy replied to the thread No Disk Space Available (Very Confused).How do I fix the chunks issue....right now the system wont let me run a GC because I have no disk spave available
