Latest activity
-
RolandK replied to the thread doing crazy things with proxmox - today: try ressource constrained device :).@seubix , maybe you can detect which flash is in your device with flashrom -p internal or flashrom -p internal:boardenable=force and then use the corresponding command for flashing not sure if this helps - and use on your own risk. -
Aadrianovf posted the thread Quick Question About Updates and Repos in Proxmox VE: Installation and configuration.I have proxmox Licence but I don't wanna use it till I install the equipment 1st, but I wanna update everything before taking the equipment to the location. My question is it fine to add a No-Subscription Repo and update everything, and then...
-
Ddevaux reacted to fweber's post in the thread Cephx Key Migration Procedure and Ceph 19.2 Squid Going EOL Soon with
Like.
An update: The Ceph packages and accompanying pve-manager and pve-docs updates are now available in the Proxmox VE 9 enterprise repositories as well. -
GGreyAreaUK replied to the thread Passing a second SATA controller through to a VM.Just an addendum to this - I may have solved this by using a different method. I followed a guide here which involves creating a new Container, then adding the following to its .conf file: lxc.apparmor.profile: unconfined lxc.cap.drop...
-
Jjelzin replied to the thread failed to query local AF_VSOCK CID.Same here, 2 new debian 13 vm's installed, on both consoles the messages below: systemd-ssh-generator[1416]: Failed to query local AF_VSOCK CID: Cannot assign requested address The command 'lsmod | grep vsock' generates this output...
-
T_Thom_ reacted to ivaylo911's post in the thread Active Directory Configuration with Prox with Like.
Hi, do not mind the last question. We figured it out. I will attach an example how it works because this was impossible for me alone to figure out. First, you have to now how it works. Synchronization to Active Directory works with ease when it...
-
JJohannes S replied to the thread Idempotence of ansbile modules.As far I know the ansible collection isn't maintained by the Proxmox developers but a community support. Did you try to ask at their issues tracker? https://github.com/ansible-collections/community.proxmox/issues
-
Sseubix replied to the thread Audio on Proxmox VE 9.2.Hello, I installed alsamixer. When I chose Card: HD Audio Generic / Chip: Realtec ALC662 rev3 and do aplay -D plughw:CARD=Generic,DEV=0 /usr/share/sounds/alsa/Front_Right.wav then i get Sound on the Speaker out. No Sound over HDMI/DisplayPort...
-
j.theisen replied to the thread kvm: Desc next is 2.Hi @fti-fred thanks for posting on the forum! Do you by chance have multiple SCSI disks connected to your VM? How did you change the drivers between tests? Background why i'm asking: Windows is very unwilling to change drivers to lower... -
Mmf_2 replied to the thread Proxmox VE 8 upgrade to 9 - how to upgrade machine version on Windows guest.Nope: Advanced Options loops back to the first screen after the keyboard layout. Let's check out UEFI: When I boot into the QEMU hard disk I get the blue menu again. When I boot into Windows Boot Manager I get the same thing. When I enter the...
-
-
Mmf_2 replied to the thread Proxmox VE 8 upgrade to 9 - how to upgrade machine version on Windows guest.SCSI. There is no ISO mounted in either of the two virtual DVD drives. After selecting German on the first screen I now get this in my clone VM: Since it is just a clone I will plow ahead: Let's try startup repair: We shall see ...
-
-
fiona replied to the thread [SOLVED] Problem backing up container.Your mountpoint is not /srv, but /opt/immich -
GGreyAreaUK replied to the thread Passing a second SATA controller through to a VM.Hmmm...maybe hold off on this for now. I think the problem runs a little deeper than Proxmox configs. I'm starting to suspect the SATA card itself is giving the machine issues. I just tried booting a bare-bones Linux (so removing Proxmox from...
-
aaron replied to the thread [Proxmox VE 9.2.2] Reload interfaces after changing configuration.It should. Can you provide more details? Then we might spot why things go wrong. Contents of /etc/network/interfaces and if you did changes via the UI, but haven't applied them yet, the contents of /etc/network/interfaces.new. -
jsterr reacted to Johannes S's post in the thread Ist eine "Rewind"-Funktion über ZFS-Snapshots in Proxmox praktikabel? with Like.
Kann ich nichts zu sagen, für mein Homelab wäre Ceph hoffnungslos überdimensioniert und mein Arbeitgeber ist leider aus diversen Gründen nach wie vor auf vmware unterwegs. Grundsätzlich müsste (ähnlich wie zfs-Replikation) auch die Replikation... -
Eednt replied to the thread Problems with boot SSD and kernel 7.0.x.There is a problem in kernel 7! It's a long known HPE hardware bug with RMRR and IOMMU There is a fix with linux kernel parameters in grub: Or you can disable VT-d in the BIOS if you don't need pass-through (System Options -> Processor Options...
-
JJohannes S replied to the thread Ist eine "Rewind"-Funktion über ZFS-Snapshots in Proxmox praktikabel?.Kann ich nichts zu sagen, für mein Homelab wäre Ceph hoffnungslos überdimensioniert und mein Arbeitgeber ist leider aus diversen Gründen nach wie vor auf vmware unterwegs. Grundsätzlich müsste (ähnlich wie zfs-Replikation) auch die Replikation...
-
Mmijutu reacted to Th.Naumann's post in the thread Cephx Key Migration Procedure and Ceph 19.2 Squid Going EOL Soon with Like.
You could try : "ceph auth del {TYPE}.{ID}"
-
jsterr replied to the thread Ist eine "Rewind"-Funktion über ZFS-Snapshots in Proxmox praktikabel?.Wird man denke ich aber auch merken, wenn man z.B. im Ceph alle 5-10 Minuten einen Snapshot macht und alte ggf. aufräumt? Schonmal mit Ceph kombiniert?
-
GGreyAreaUK replied to the thread Passing a second SATA controller through to a VM.dmesg -w: journalctl -f :
-
