Latest activity
-
DDju replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Hello, I have 2 servers running proxmox, both mini-pc with 2 ssd inside. One machine is running on zfs, the other on ext4 on top of raid1 (mdadm) Since kernel 7.0.14-6, i also have huge latency spikes, by several seconds. on both machines. And i...
-
-
UdoB replied to the thread RAID5 und XFS im Cluster mixen?.Ja, Spiegel sind essentiell! Und PLP ist wertvoll. PLP verhindert nicht nur Datenverlust, sondern erhöht auch die Performance drastisch. (Nachtrag: ... und die Lebensdauer...) Ja, ich weiß, dass du das weißt. ;-) Ich würde allerdings das... -
Damit würde ich: bei der PVE-Installation nur auf das Blech installieren, und zwar auf zwei Spiegel, fka "Raid10". Am Ende ist jede dieser vier Platten bootfähig. später, wenn alles läuft, die beiden kleineren Platten (SSD?) als "Special... -
@ThoSo hat recht, den 9550-8i gibt es so nicht. @oelk, lass auf der Kiste mal storcli64 /c0 show laufen, dann steht der echte Typ drin. Das ist wichtig: 9500 ist ein reiner HBA (ideal für ZFS), 9540 kann 0/1/10, und erst ab 9560 gibt es RAID5/6...
-
Llonger replied to the thread Second IP address on vmbr0.If its cluster nodes, then might be problematic as shown above. Although you can work on separate migrating network/replication then it should be fine as well I think.
-
JohnnieKF reacted to UdoB's post in the thread allow user to only access one vm's console/terminal with
Like.
The Permission Management -concept should allow this, I believe. See this chapter: https://pve.proxmox.com/pve-docs/chapter-pveum.html#_objects_and_paths Unfortunately this whole concept needs some learning effort first as the dependencies and... -
Aadolfotregosa replied to the thread Intel 245k iGPU passthrough - no hdmi audio.unfortunately it is not the problem, I passthrough to the VM the MEI device: root@pve:~# lspci -nn | grep -Ei 'HECI|MEI|Management Engine|Communication controller' 80:16.0 Communication controller [0780]: Intel Corporation 800 Series PCH HECI...
-
driley reacted to DodgeCO's post in the thread Proxmox replaces on premise Exchange server in hybrid environment with Like.
Greetings all, I stumbled upon the Proxmox mail gateway a couple of days ago when researching a replacement for VMware. We have a hybrid exchange setup. This means that most of our email function is in Exchange Online while the on premise... -
JohnnieKF replied to the thread May I ask if PVE supports the following operating systems.PVE doesn't have a 'supported' list, I am assuming this is a list of VMs you're wanting to export from an existing system like vSphere? You can run essentially any x86-64 OS, so all of those are fine. The OS Type field in PVE isn't a...
-
Zzash1958 replied to the thread Second IP address on vmbr0.Both are in different subnets/networks. First, existing on 192.168. The second should be in a 10.x network
-
Llonger replied to the thread Second IP address on vmbr0.As mentioned in the thread above: "For two IPs in two subnets, you will need a second NIC." However, if your node is standalone (not part of a cluster), you can easily add two IPs from different subnets on the same bridge using a command like...
-
Ppoulpor replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.I'm experiencing exactly the same issue. With 32 GB of RAM, I have to leave 8 to 10% free, or the Proxmox host freezes and the fans go wild. I first noticed this after rebooting following the update to kernel 7.0: the fans went wild, and I...
-
Moin Da wäre die erste Frage welche Hardware hast Du bereits jetzt zur Verfügung? Hast Du das RAM und die 4 HDD bereits? Spielt Geld bei Dir ggf. eine Rolle? :) Ich habe eben mal geschaut was so eine Minisforum N5 Air Kiste kostet und sehe da... -
Ttangshuai posted the thread May I ask if PVE supports the following operating systems in Proxmox VE: Installation and configuration.Red Hat Enterprise Linux 8 (64-bit) CentOS 7 (64-bit) Red Hat Enterprise Linux 7 (64-bit) Other 3.x or later Linux (64-bit) Microsoft Windows Server 2012 (64-bit) Oracle Linux 6 (64-bit) Red Hat Enterprise Linux 6 (64-bit) Oracle Linux 7 (64-bit)...
-
Llonger replied to the thread Second IP address on vmbr0.See: https://forum.proxmox.com/threads/assigning-an-additional-ip-to-the-host.146157/post-659351
-
ZHello, we need to config a second IP address on a PVE server to the existing bridge vmbr0 with has already an IP address. Have we to add it via CLI in /etc/networking/interfaces ? How to bind the webinterface/ssh etc to this second interface...
-
Ppoulpor reacted to snakeoilos's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Kernel 7.0.0-2-pve will freeze the host if total free RAM becomes low (< 5 to 10% free). Any one seeing this issue? I just have to back off the RAM requirements for my VMs a little (now around 87% usage) and everything works again. Host do not...
-
hi there i solved the issue thru flashing the rom and now the drives shows correctly. thanks
-
JYou right, somehow I understood that there are SSD for OS but not SSD to dedicate to SD, so imagined that OP wanted to devote some space on those SSD for SD.
-
JThis is only HDD, zero SSD. (As of #1) Having a "separate" Special Device on the very same spindles makes no sense. Actually we know not much at all. What actual drives are available? How many? How many (unused) connectors has the controller...
