unseen jbod drives

R

ravdrak

New Member
Aug 10, 2025
5
1
3
hi there

just newly installed to my old thinksystem ST250 with 530-8i raid controller card. i set to jbod on lenovo system the pbs wont seen any drives? thanks

root@pbs:~# dmesg | grep -iE "sas|sata|sd|ahci"
[ 0.007595] ACPI: RSDP 0x000000008DD53000 000024 (v02 LENOVO)
[ 0.007599] ACPI: XSDT 0x000000008DD530D0 000124 (v01 LENOVO THINKSYS 00000100 AMI 00010013)
[ 0.007609] ACPI: DSDT 0x000000008DD53288 03BAA1 (v02 LENOVO THINKSYS 00000100 INTL 20160527)
[ 0.007630] ACPI: SSDT 0x000000008DD8F030 001B1C (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
[ 0.007636] ACPI: SSDT 0x000000008DD90B80 0031C6 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
[ 0.007639] ACPI: SSDT 0x000000008DD93D48 00232B (v02 PegSsd PegSsdt 00001000 INTL 20160527)
[ 0.007645] ACPI: SSDT 0x000000008DD960B0 000FAE (v02 LENOVO Ther_Rvp 00001000 INTL 20160527)
[ 0.007648] ACPI: SSDT 0x000000008DD97060 0008F4 (v02 INTEL xh_mossb 00000000 INTL 20160527)
[ 0.007654] ACPI: SSDT 0x000000008DD979A0 0003A2 (v02 LENOVO THINKSYS 00001000 INTL 20160527)
[ 0.007659] ACPI: SSDT 0x000000008DD97DE0 0027DE (v02 LENOVO PtidDevc 00001000 INTL 20160527)
[ 0.007662] ACPI: SSDT 0x000000008DD9A5C0 0014E2 (v02 LENOVO TbtTypeC 00000000 INTL 20160527)
[ 0.007671] ACPI: SSDT 0x000000008DD9BB38 001B67 (v02 LENOVO UsbCTabl 00001000 INTL 20160527)
[ 0.007680] ACPI: SSDT 0x000000008DD9D888 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
[ 0.007682] ACPI: UEFI 0x000000008DD9D9D0 00005C (v01 INTEL RstSataV 00000000 00000000)
[ 0.007685] ACPI: SSDT 0x000000008DD9DA30 000D8F (v02 INTEL SpsNm 00000002 INTL 20160527)
[ 0.007688] ACPI: SSDT 0x000000008DD9E7C0 00021F (v02 LENOVO CDNTABLE 00001000 INTL 20160527)
[ 0.007706] ACPI: Reserving DSDT table memory at [mem 0x8dd53288-0x8dd8ed28]
[ 0.007712] ACPI: Reserving SSDT table memory at [mem 0x8dd8f030-0x8dd90b4b]
[ 0.007713] ACPI: Reserving SSDT table memory at [mem 0x8dd90b80-0x8dd93d45]
[ 0.007714] ACPI: Reserving SSDT table memory at [mem 0x8dd93d48-0x8dd96072]
[ 0.007716] ACPI: Reserving SSDT table memory at [mem 0x8dd960b0-0x8dd9705d]
[ 0.007716] ACPI: Reserving SSDT table memory at [mem 0x8dd97060-0x8dd97953]
[ 0.007718] ACPI: Reserving SSDT table memory at [mem 0x8dd979a0-0x8dd97d41]
[ 0.007720] ACPI: Reserving SSDT table memory at [mem 0x8dd97de0-0x8dd9a5bd]
[ 0.007720] ACPI: Reserving SSDT table memory at [mem 0x8dd9a5c0-0x8dd9baa1]
[ 0.007723] ACPI: Reserving SSDT table memory at [mem 0x8dd9bb38-0x8dd9d69e]
[ 0.007725] ACPI: Reserving SSDT table memory at [mem 0x8dd9d888-0x8dd9d9cb]
[ 0.007727] ACPI: Reserving SSDT table memory at [mem 0x8dd9da30-0x8dd9e7be]
[ 0.007727] ACPI: Reserving SSDT table memory at [mem 0x8dd9e7c0-0x8dd9e9de]
[ 0.339462] ACPI: SSDT 0xFFFF89FB8080A400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.341090] ACPI: SSDT 0xFFFF89FB80875700 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
[ 0.342634] ACPI: SSDT 0xFFFF89FB80369A00 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.344203] ACPI: SSDT 0xFFFF89FB803D3000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.346032] ACPI: SSDT 0xFFFF89FB80809800 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.347815] ACPI: SSDT 0xFFFF89FB8222C000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527)
[ 0.350251] ACPI: SSDT 0xFFFF89FB8080BC00 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 1.606863] megasas: 07.734.00.00-rc1
[ 1.612883] megaraid_sas 0000:06:00.0: BAR:0x0 BAR's base_addr(phys):0x0000004000100000 mapped virt_addr:0x00000000ba245428
[ 1.613059] megaraid_sas 0000:06:00.0: FW now in Ready state
[ 1.613339] megaraid_sas 0000:06:00.0: 63 bit DMA mask and 63 bit consistent mask
[ 1.613981] megaraid_sas 0000:06:00.0: firmware supports msix : (16)
[ 1.627433] megaraid_sas 0000:06:00.0: requested/available msix 5/5 poll_queue 0
[ 1.627692] megaraid_sas 0000:06:00.0: current msix/max num queues : (5/4)
[ 1.627929] megaraid_sas 0000:06:00.0: RDPQ mode : (enabled)
[ 1.628152] megaraid_sas 0000:06:00.0: Current firmware supports maximum commands: 1517 LDIO threshold: 0
[ 1.635582] megaraid_sas 0000:06:00.0: Performance mode :Latency (latency index = 1)
[ 1.635862] megaraid_sas 0000:06:00.0: FW supports sync cache : Yes
[ 1.637033] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, RAID mode
[ 1.637270] ahci 0000:00:17.0: 8/8 ports implemented (port mask 0xff)
[ 1.637490] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
[ 1.642227] megaraid_sas 0000:06:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009
[ 1.661726] scsi host1: ahci
[ 1.676945] scsi host2: ahci
[ 1.686072] scsi host3: ahci
[ 1.693181] scsi host4: ahci
[ 1.696364] scsi host5: ahci
[ 1.699908] scsi host6: ahci
[ 1.704331] scsi host7: ahci
[ 1.704767] scsi host8: ahci
[ 1.705116] ata1: SATA max UDMA/133 abar m2048@0x92102000 port 0x92102100 irq 136 lpm-pol 1 ext
[ 1.705391] ata2: SATA max UDMA/133 abar m2048@0x92102000 port 0x92102180 irq 136 lpm-pol 1 ext
[ 1.705647] ata3: SATA max UDMA/133 abar m2048@0x92102000 port 0x92102200 irq 136 lpm-pol 1 ext
[ 1.705892] ata4: SATA max UDMA/133 abar m2048@0x92102000 port 0x92102280 irq 136 lpm-pol 1 ext
[ 1.706195] ata5: SATA max UDMA/133 abar m2048@0x92102000 port 0x92102300 irq 136 lpm-pol 1 ext
[ 1.706429] ata6: SATA max UDMA/133 abar m2048@0x92102000 port 0x92102380 irq 136 lpm-pol 1 ext
[ 1.706661] ata7: SATA max UDMA/133 abar m2048@0x92102000 port 0x92102400 irq 136 lpm-pol 1 ext
[ 1.706914] ata8: SATA max UDMA/133 abar m2048@0x92102000 port 0x92102480 irq 136 lpm-pol 1 ext
[ 2.014731] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.014981] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.015653] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.016431] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.017166] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.017877] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.018856] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.019598] ata1: SATA link down (SStatus 0 SControl 300)
[ 7.337082] megaraid_sas 0000:06:00.0: Ignore DCMD timeout: megasas_get_ctrl_info 5387
[ 7.337341] megaraid_sas 0000:06:00.0: Could not get controller info. Fail from megasas_init_adapter_fusion 1905
[ 7.343278] megaraid_sas 0000:06:00.0: Failed from megasas_init_fw 6549
 
Last edited:
i search google for "530-8i raid controller proxmox" and found many results.
Maybe your kernel don't support this type of card.
So check this by your selve with your Proxmox VE and Debian 13 Version.
 
news said:
i search google for "530-8i raid controller proxmox" and found many results.
Maybe your kernel don't support this type of card.
So check this by your selve with your Proxmox VE and Debian 13 Version.
Click to expand...
hi there

i solved the issue thru flashing the rom and now the drives shows correctly.

thanks
 
  • Like
Reactions: news
You must log in or register to reply here.
Top Bottom
Back