Latest activity
-
Llonger replied to the thread [SOLVED] Changing an Existing Subscription Key to Another Subscription Key.Yes, your understanding is correct. If for whatever reason the new subscription didnt get replaced correctly, you can attempt with --force option: pvesubscription update --force
-
LLarsen replied to the thread Security update ClamAV 1.4.6.Still no update from the Debian maintainers... @Stoiko Ivanov Is Proxmox going to release a fixed version?
-
AAlban24x7 reacted to Udbytossen's post in the thread After Critical breakdown - can not see my Backups with
Like.
Alban24x7 Thank you very much - did the trick -
dakralex replied to the thread Adding HA resources to an existing HA affinity rule and outdated manpages.This comment in BZ 7260 [0] does state how HA resources can be added by adding items to the existing HA resources list of the node affinity rule. However, is there a specific use case why this is done in the pre-start hook-script instead of the... -
Maximiliano replied to the thread VM becomes unresponsive during Veeam backup.Hello, Can you please try to configure Veeam to use the local storage instead of Ceph? In principle you should need just enough space for the VM to write there temporarily while the backup is running. EDIT: Any other local storage (rather than... -
AArnaud Gastiger replied to the thread [SOLVED] Unattended Windows installation with integrated virtio drivers.Hello, you will find below a link to a project that allows Windows virtual machines to be automatically deployed from an Unattended.xml template file. It also supports the installation of VirtIO drivers...
-
JJohannes S reacted to SInisterPisces's post in the thread [SOLVED] [PDM 1.1.x] New to PDM: How to Add Remote (Set Up User/Permissions)? with Like.
I apologize. I just read through the entire documentation for PDM and feel like I must have missed something. Is there a guide to adding a Remote (cluster) to PDM using the web GUI? The web GUI's interface for adding a Remote is pretty...
-
JDas >100% ist der Host-RSS vom qemu-Prozess, da steckt der ganze Overhead mit drin, deshalb geht das auch mal über 100. Check mal, ob auf genau diesen VMs der QEMU-Guest-Agent läuft bzw. in den VM-Optionen überhaupt aktiviert ist (qm agent <vmid>...
-
JJohannes S replied to the thread [Small Office/Home Office Deployment] Any Benefit to Combining Clustering and PDM-Based Management on Small-Scale Local Deployment?.For replication clustering isn't actually needed since you could also use pve-sync for it. The story is different for high-availability though, that feature needs a cluster. Only @SInisterPisces know whether he needs it or not though ;) One...
-
JJohannes S reacted to jsterr's post in the thread PVE 9.2 + Ceph Tentacle 20.2.4: RBD operations fail because pve-storage passes removed --auth_supported option with Like.
for reference. I also used the workaround by editing the file.
-
JI would put the RAID controller in JBOD / IT mode to convert it to an HBA, the use ZFS for both the OS and special device. Remember that ZFS isn't supported on RAID controllers/LUNs. When installing PVE/PBS, set the disk size to ~50G, should be...
-
JJa ist richtig, habe ich verwechselt, ein WG Client reicht. In Verbinduing mit dem zweiten Ziel - abschottung vom restlichen LAN - trotzdem nicht mal so eben zusammen geklimpert. Den Zugriff auf den Router sehe ich unkritisch, es kommt es auf das...
-
Hhattiehuber posted the thread Proxmox backup and documentation in Proxmox Backup: Installation and configuration.Hi everyone, I'm currently working on the fun project of cleaning up and organizing my homelab. I'm running Proxmox, and over time I've accumulated quite a bit of custom configuration—bridges, DDNS, certificates, VMs/LXCs, NFS mounts through...
-
JEinen Wireguard Server (egal ob nativ, mit OpenWRT oder OPNsene) zu konfigurieren UND das ganze in die PVE Network config einzuarbeiten ist nicht ganz trivial. Man kann alles machen, wenn man die nötigen Kenntnisse hat... das eignet mansich auch...
-
JBei Host vs. LXC noch ein Punkt: wenn WireGuard im Container läuft, hat der Host selbst gar keine WG-IP, an die sich pveproxy überhaupt binden könnte. Du müsstest den Kram dann per Routing/NAT aus dem LXC zum Host schaufeln, und die...
-
J@Supaman, einen WireGuard-Server braucht er dafür gar nicht, der PVE wird ja nur Client. Die Familie hängt schon in seinem Tunnel, also kommt auf den Host eine wg-quick-Config mit einem Peer, Endpoint auf seine Seite und PersistentKeepalive (NAT...
-
JJohannes S reacted to UdoB's post in the thread [SOLVED] [Virtualizing PDM] Host PVE Node Uses ZFS Storage. When installing PDM inside VM, EXT4 or ZFS? with Like.
That's interesting. Basically it's a great example of having the same information as everybody and coming to the exact opposite conclusion. While personally I would not go that road: if it works for you, it is fine! :-) (( It may depend on...
-
Ggfngfn256 replied to the thread cfg80211: failed to load regulatory.db.Not unless you want to break you Proxmox install. Concerning your issue, see this thread.
-
SSupaman replied to the thread Proxmox vollständig via Wireguard.Ja ist richtig, habe ich verwechselt, ein WG Client reicht. In Verbinduing mit dem zweiten Ziel - abschottung vom restlichen LAN - trotzdem nicht mal so eben zusammen geklimpert. Den Zugriff auf den Router sehe ich unkritisch, es kommt es auf das...
-
VictorSTS replied to the thread PBS on RAIDZ2+HDD, no special file.I would put the RAID controller in JBOD / IT mode to convert it to an HBA, the use ZFS for both the OS and special device. Remember that ZFS isn't supported on RAID controllers/LUNs. When installing PVE/PBS, set the disk size to ~50G, should be...