Latest activity
-
Rrfox replied to the thread PDM 1.1.7 - where is uptime in GUI ?.Bug filed: https://bugzilla.proxmox.com/show_bug.cgi?id=7932
-
JohnnieKF replied to the thread Proxmox VE 9.2 installation hangs at 99% "make system bootable" on HPE ProLiant DL380 Gen12 – PVE 8.4 installs fine.Boot the ISO and pick 'Advanced Options' > 'Install Proxmox VE (Debug mode)'. You'll get a shell before the installer runs, then exit to proceed the installer. When it stalls at 99%, switch console with Ctrl+Alt+F3 and grab: cat /tmp/install.log -
Uuzumo replied to the thread NVIDIA vGPU passthrough - PCI AER and ReBAR not working properly.Linux v6.19 and QEMU 11.0 simply have the capability to check for the presence or absence of certain features; not all drivers or devices support those features. Therefore, I don't think the display is acting strangely. Has RHEL 8 reached the...
-
JohnnieKF replied to the thread iGPU passthrough with Intel UHD Graphis 600 on Intel Celeron J4115 stopped working with Kernel 7.0.Pin 6.17 for now so you're not stuck with a broken passthrough: proxmox-boot-tool kernel pin 6.17.13-21-pve Then post your VM config so we can see how the device is attached: qm config <VMID>
-
driley replied to the thread Where to see which s3 endpoint used by a datastore in UI?.Ah, I see what you mean. Currently, I don't know of any way you can figure this out without looking at the configuration files in a shell. It does seem like a sensible addition to the UI, so feel free to create a feature request on Bugzilla... -
shanv replied to the thread PDM 1.1.7 - where is uptime in GUI ?.Ahh, sorry! We don't have that yet. Could you please create an enhancement request in Bugzilla? -
Ggabbegubben replied to the thread avast for Linux now available for trixie.Wow, I actually contacted their customer service a month ago about support for Debian 13 (trixie) and got the following response: so this is a very nice surprise :)
-
Ggabbegubben reacted to paul477's post in the thread avast for Linux now available for trixie with
Like.
Hi. I 've been missing avast for Linux for PMG 9 / debian trixie for quite some time but now I find it published on their repository server. Took them a long time but now it's arrived :) Hth -
JJohannes S reacted to gfngfn256's post in the thread Install Proxmox on the Raspberry Pi 4 with Like.
Though clearly unsupported by PVE (as specified in the release), the lately-released official PVE for arm, seems to somewhat "accommodate" a pi-installation, as general web-searching seems to show. (Even a user or two on these forums seems to...
-
Rrfox replied to the thread PDM 1.1.7 - where is uptime in GUI ?.Thanks - that's actually not what I meant - I mean on the Summary page of each node, VMs and CTs there is the Uptime being shown - but nowhere to be found on PDM The PDM shows last refresh on Dashboard - but no indication of the Uptime of the...
-
-
shanv replied to the thread PDM 1.1.7 - where is uptime in GUI ?.Hi, for guests, the uptime is visible under the guests entry in the sidebar. Please check this section.
-
JAlso, das mag vielleicht meinem Alter geschuldet sein, aber mit diesem "neumodischen" Foren Marke "Dicourcse", oder Reddit und Discord kann ich nichts anfangen. Das ist alles extrem unübersichtlich. Und wir reden jetzt noch nicht einmal über...
-
Mmrapajic replied to the thread Proxmox 9 CPU/IO starved when doing a restore from PBS.I can confirm this hapenned to me also 4 weeks ago PVE8 and PBS9. I was restoring "bigger" VM 2TB. Only affected win server and crashed them. Eventually had to restore them also.
-
Kkawano-y replied to the thread The PVE cluster can connect to NFS via Cluster dashboard from front-end side but fail connect to NFS via Cluster dashboard from back-end side?.I agree that more information is needed to understand the issue. Please provide the following outputs. On each PVE node: ip addr ip route cat /etc/pve/storage.cfg pvesm status showmount -e <NFS_BACKEND_IP> rpcinfo -p...
-
Wwaltar reacted to fschauer's post in the thread I know about bindmounts - is there a way to mount an SMB/CIFS share in multiple containers with different credentials for each? with Like.
There is a way. Under Container -> Options -> Features -> enable FUSE. Install rclone and fuse3 in the container. Run rclone config and setup an SMB remote. Mount it where needed with rclone mount ... You can setup a service in the container to...
-
WHi I tried this way .... Subject: [BUG] megaraid_sas: PRP list overflow on NVMe drives with kernel >= 7.0 (BLK_DEF_MAX_SECTORS_CAP raised to 4M) To: linux-scsi@vger.kernel.org Cc: megaraidlinux.pdl@broadcom.com Cc: Kashyap Desai...
-
WIsnt that what "Hibernate" does ;-) ?
-
BAlso, das mag vielleicht meinem Alter geschuldet sein, aber mit diesem "neumodischen" Foren Marke "Dicourcse", oder Reddit und Discord kann ich nichts anfangen. Das ist alles extrem unübersichtlich. Und wir reden jetzt noch nicht einmal über...
-
Llonger reacted to UdoB's post in the thread Impossible to install Proxmox in a Lenovo m70q with Like.
I am sure there are better lists-of-recommendations than this adhoc reply, but here we go: installation from an USB stick may fail in different modes depending on the tool used to put the image on it. Don't use wrappers like Ventoy. (Ventoy is...
-
PPatrik_V replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.Hi I tried this way .... Subject: [BUG] megaraid_sas: PRP list overflow on NVMe drives with kernel >= 7.0 (BLK_DEF_MAX_SECTORS_CAP raised to 4M) To: linux-scsi@vger.kernel.org Cc: megaraidlinux.pdl@broadcom.com Cc: Kashyap Desai...
