Latest activity
-
JJohannes S reacted to Chris's post in the thread Proxmox Backup Server 4 | S3 | Cold Storage | Glacier with
Like.
No, PBS currently does not support different storage classes, see https://bugzilla.proxmox.com/show_bug.cgi?id=6688 Unfortunately these are rather provider specific. -
Uuzumo replied to the thread NVIDIA vGPU passthrough - PCI AER and ReBAR not working properly.You should already know which module is currently in effect. If I had used QEMU 10, I probably wouldn't have encountered any errors, but since there were no errors, I'm sure I would have been satisfied even without the new features. Anyway, if...
-
WOne can also use "negative affinity" to prevent HA VMs from moving to certain nodes. Side note: if you add a Qdevice for a 5th vote, then the cluster can handle 2 nodes being off simultaneously. Currently it's just one because 2/4 is not over...
-
Gguruevi replied to the thread NVIDIA vGPU passthrough - PCI AER and ReBAR not working properly.The first error is benign, we've been getting these for years, it has to do with PCIe bus error recovery. The second error is also benign, you typically see it when your QEMU and kernel versions aren't matched. Are you using the enterprise repo...
-
AAlexanderB replied to the thread failed to query local AF_VSOCK CID.Having the same issue on one VM. I don´t know if this will cause an issue in the future.
-
CPVE's wizard does not create a partition (table). I complained about this here: https://bugzilla.proxmox.com/show_bug.cgi?id=6915 By the way you don't need to initialize a disk for the wizards. The disk disk just needs to be empty.
-
cwt replied to the thread NVIDIA vGPU passthrough - PCI AER and ReBAR not working properly.If CONFIG_VFIO_PCI_DMABUF=y is enabled on the 7.0 kernel and QEMU 11 still reports the feature as unavailable, this probably isn’t about kernel version anymore. The interesting part may be the NVIDIA vGPU VFIO backend itself. This isn’t a... -
ANochmal: Installiere PVE. Dort wird mit Standardeinstellungen deine komplette 4TB-Platte verwendet. Bei deinen rudimentären (CLI-)Kenntnissen und auch noch fehlender 2ten 4TB-SSD, verwende LVM und kein ZFS. PVE erledigt die interne...
-
Mmystica555 posted the thread New 7.0.14-12-pve kernel as of August 11 2026 in Proxmox VE: Installation and configuration.Greetings! I saw the new kernel for upgrade and looked at the most recent GIT changes and there seems like a boatload of files were modified 2 days ago. Is it an accurate understanding of all the patches to say that this is a massive roll-up...
-
AZwei Disks, nur eben beide auf demselben Storage. @TErxleben meinte nicht 'alles in eine Platte', sondern dass die VM nicht gleichzeitig an NVMe und SATA hängen soll, sonst reißt dir jeder der beiden Datenträger die komplette VM mit. Innerhalb...
-
AErgänzend zu @Bu66as : OMV braucht eine Systemdisk und dann können beliebig viele Datendisks angebunden werden. Zwei Platten sind Minimum. Und die Datendisk für die VM mal nicht über die ganze Platte erzeugen, ich schlage mal 2TB vor. Hast du...
-
KKeith Miller posted the thread Install SSL cert for mail server in Proxmox VE: Installation and configuration.Using version 9.2.4 I am hosting a mailserver on Proxmox how do I setup anSSL cert for it
-
One can also use "negative affinity" to prevent HA VMs from moving to certain nodes. Side note: if you add a Qdevice for a 5th vote, then the cluster can handle 2 nodes being off simultaneously. Currently it's just one because 2/4 is not over... -
THX :) No, there was no active vzdump process, and lock line exists in grep lock /etc/pve/qemu-server/100.conf. qm unlock 100 works great, everything now is OK.
-
Uuzumo replied to the thread NVIDIA vGPU passthrough - PCI AER and ReBAR not working properly.As long as you're using QEMU 11, which supports VFIO_DEVICE_FEATURE_DMA_BUF, you can check whether it works, and any errors will be logged. Even if it is lowered to 6.17 (6.17.13-21), Qemu will check whether that feature is available, regardless...
-
Ttszczesn replied to the thread bad backup status for VM.THX :) No, there was no active vzdump process, and lock line exists in grep lock /etc/pve/qemu-server/100.conf. qm unlock 100 works great, everything now is OK.
-
Llama2176 replied to the thread 7.0.14-7 kernel breaks PCI link training.Fix confirmed in the production kernel. 7.0.14-12-pve boots normally on my QDNV01/C3558 without initcall_blacklist=mid8250_pci_driver_init, and 8250_mid/ttyS4 are working again. Thanks!
