Latest activity
-
G_gabriel reacted to Radik Makhmudov's post in the thread ZFS performance collapse on MegaRAID 9364 with Samsung 870 EVO SSDs (PVE 9) with
Like.
Hi everyone, I'd like to summarize this investigation in case someone encounters a similar issue in the future. First of all, thank you to everyone who took the time to review the logs and suggest ideas. This was my first serious OpenZFS... -
Sstatic302 replied to the thread [SOLVED] io_uring on kernel 7.0.6-2-pve (PVE 9.2.3): guest disk I/O errors (EIO) + filesystem XFS shutdown.Sorry for the late answer. We went back to 6.17.13-19-pve, since we still hitting the same problems on newer 7.x as you are.
-
JJohannes S replied to the thread Containers on GlusterFS?.PVE8 doesn't get any security and other bug fixes anymore, see: https://forum.proxmox.com/threads/proxmox-ve-support-lifecycle.35755/ So you need to upgrade to PVE9 as soon as possible to continue getting security and other upgrades and then you...
-
news replied to the thread no ssh and GUI access.Ok, no i understand. Do you have access to a USB3 1 GBIt/s Network Adapter? I wrote a thread in the NATIONAL SUPPORT german part: # https://forum.proxmox.com/threads/usb3-lan-adapter-für-gegen-netzwerkprobleme.185310/#post-862967 -
Ddbrega replied to the thread no ssh and GUI access.Yes I installed iit bevor but I need to reboot the pve because in this state, I can't manage the PVEs using either SSH or the web GUI and based on your link, it looks like the command has to be run from a shell console, which I don't have access...
-
FA command which displays information about (LVM) volume groups. https://man7.org/linux/man-pages/man8/vgs.8.html
-
news replied to the thread no ssh and GUI access.So??? Please read: # https://forum.proxmox.com/threads/intel-nic-e1000e-hardware-unit-hang.106001/page-2#post-713319 And you don't need to restart your lenovo ThinkStation P3 PC, if you have installed it bevor.
-
Ddbrega replied to the thread no ssh and GUI access.no the NIC is intel ethernet I219-LM and not INTEL E1000 for ethtool <net-device> I need to force reboot manualy After restarting, are there any logs I can check to figure out what the problem is? Otherwise, after two hours, I'll be back where I...
-
news replied to the thread no ssh and GUI access.With NIC is in your PC installed? A INTEL E1000(E)? then please read the 1000 Threads about the Problem.
-
news replied to the thread no ssh and GUI access.please show ip addr show ip route show ethtool <net-device> # example eth0, enoX, enpYsZ
-
BBu66as reacted to toffer84's post in the thread Bestpratice Frage: Proxmox Host "clustern" with Like.
Hallo zusammen, ich habe jetzt alles nochmal neu gemacht und 2 PVE Hosts inkl. QDevice (Raspi 4) in einem Cluster zusammen mit ZFS laufen. Seit einer Woche läuft alles wie es soll, fällt der eine Host aus, werden die LXCs und die...
-
DInstalled proxmox in a single lenovo ThinkStation P3 but after some hours I not be able to access system with gui and ssh Test ping to pve is ok The nestat comand response is below Also the connection give established status I not see the web...
-
-
UdoB reacted to Radik Makhmudov's post in the thread ZFS performance collapse on MegaRAID 9364 with Samsung 870 EVO SSDs (PVE 9) with Like.
Hi everyone, I'd like to summarize this investigation in case someone encounters a similar issue in the future. First of all, thank you to everyone who took the time to review the logs and suggest ideas. This was my first serious OpenZFS... -
news reacted to fabian's post in the thread ZFS performance collapse on MegaRAID 9364 with Samsung 870 EVO SSDs (PVE 9) with Like.
that doesn't really tell us much, and in any case, that consumer SSDs don't give much performance with ZFS is not a kernel bug ;) if you can reproduce the acpi_pad kernel threads pegging the CPU and have a reliable trigger for that, please...
-
Wwhatthefiswrongwithcluste replied to the thread Server 2025 High CPU.Seeing the same behavior. CPU usage is reported in Proxmox between 8% to 11% when idle. taskmanager in the VM reports below 1%. Server2025 Ryzen 4800h CPU Happens both with default "x86-64-v2-AES" as well as "host" CPU type. "hv_emcs" is not...
-
RRadik Makhmudov replied to the thread ZFS performance collapse on MegaRAID 9364 with Samsung 870 EVO SSDs (PVE 9).Hi everyone, I'd like to summarize this investigation in case someone encounters a similar issue in the future. First of all, thank you to everyone who took the time to review the logs and suggest ideas. This was my first serious OpenZFS...
-
Aalpha754293 replied to the thread Containers on GlusterFS?.Pardon my stupid question but why can't the "native" GlusterFS client in Proxmox 8 handle LXC rootdirs? I understand that if I want to use it with it, that I will have to create a directory and then use that instead, but I am just trying to...
-
Kkfietz replied to the thread Windows Server 2025 CPU suddenly at 100%.@SteveITS mhh so the other nodes are running the same kernel. The existing older Kernels do not really matter. Maybe some different BIOS Settings? Intel Nested Virtualization maybe off? But v3 shouldnt even use that, if I understood that...
-
SteveITS replied to the thread Windows Server 2025 CPU suddenly at 100%.One would think but I upgraded them about 15 minutes apart. The one that works has a few extra older kernel versions as I hadn't run autoremove yet. I use the PVE GUI to upgrade. "uname -a" is the same on both. Which might imply some hardware... -
powersupport replied to the thread VM Migration error.Hi, This is expected behavior. Although both nodes have an LVM storage with the same name, they are still separate local storages. Proxmox does not support storage migration directly from local LVM to local LVM, which is why you see the error
