Latest activity
-
In the Proxmox GUI, it would be nice to select multiple snapshots and issue one delete command. Currently each snapshot must be deleted individually. -
Jjosh.greyz posted the thread What is process to get new CT Template added to Proxmox VE 9.x? in Proxmox VE: Installation and configuration.I'm not able to find the information for this, so I am asking here if anyone knows the process to get new CT Template added to Proxmox VE 9.x. Alpine Linux 3.24 was released early June 2026 and it is missing from the CT Templates downloads.
-
MMVerBerkmoes posted the thread Proxmox VE 9 installer fails on Dell PowerEdge T630 before installer UI, while Proxmox VE 8 and Debian 13.6 installer boot successfully-same hardware in Proxmox VE: Installation and configuration.I have been struggling with this for several weeks and even opened a bug report without success. I'm hoping someone here that is far more versed in Linux and ProxMox can help me get my v8 machine upgraded. I attempted to bare install v9.2 on...
-
UdoB reacted to Johannes S's post in the thread Proxmox cluster split after FritzBox Update with
Like.
If you want to learn or play around with clusters you could create them as vms on one of your sites :) Depending on your hardware only lxcs might work but that would still give you some insights how clustering, ceph, ha etc work even without... -
Pproxuser77 replied to the thread Ich möchte Proxmox neu aufsetzen - Was sollte ich verändern?.Nun, wenn er HA mit Replikation nutzen möchte, wird er ZFS brauchen. Ob man HA braucht, ist eine andere Frage. Aber man muss ja nicht in jedem Thread zwingend immer zu Adam und Eva zurückgehen. ;) Und alle drei werden auf einer SATA-SSD deutlich...
-
DIs there an option to set the units used for network traffic in the summary? I cant seem to see it anywhere.......Am i missing something? Mention of the scale would be a plus.
-
-
jsterr replied to the thread Questions about the dynamic CRS.Hi Daniel! Some cases that do not work or might be cool adding them: Example 1: A resource affinity rule with “Keep Separate” for VM1 and VM2, combined with an HA node affinity rule (without “Strict”) on node1 and node2 (checked), but not... -
-
Kkalium replied to the thread Moving from 3-node full-mesh SDN to a 6-node using switches.It was just easier and quicker to set up. I don't think there's any other benefit over a static configuration, but I didn't run any tests to compare them.
-
Uuzumo replied to the thread Windows Server 2025 CPU suddenly at 100%.Thanks for your reply. The command results are as follows. I added what seemed necessary since some information was probably missing, but feel free to skip this if you don't need it. CPU : Intel Core Ultra 7 265K MEM : Crucial CP2K48G56C46U5 x4...
-
Ddespens replied to the thread [SOLVED] Containers assigned an SDN won't start.Hello all, I figured out the issue: the system default dnsmasq was not properly shut down when running systemctl disable --now dnsmasq. The process kept blocking port 53 so the freshly installed proxmox dnsmasq wasn't able to start. Perhaps it...
-
l.leahu-vladucu replied to the thread QEMU 11.0 available on pve-test and pve-no-subscription as of now.Hi @jjimenez! I also do not have a concrete date or a rough estimate about how far off a release of the new VirtIO Windows drivers could be. We are aware of the issue with event 8194, as reported upstream and in the QEMU changelog as well. The... -
TTErxleben replied to the thread Ich möchte Proxmox neu aufsetzen - Was sollte ich verändern?.Was das Dateisystem angeht, hier ein durchaus lesenswerter Artikel: https://webhosting.de/ext4-xfs-zfs-hosting-performance-vergleich-storage/
-
LLe_Coyote replied to the thread LXC: cannot mount /run inside guest after PVE 8 to 9 upgrade (was: loopback interface not coming up).Of course, come to think of it, as long as the mount succeeds, this should not be too big of a problem. Thank you for the heads-up. Regarding your earlier suggestion to open a bug, I'll do so right now, if only to make sure the issue stays on...
-
SSetEnforceZero replied to the thread Any way to enable Guest Firewall by default?.Of course thank you. I am already using templates too, I just didn't think as I was messing around manually. Thanks very much!
-
SSetEnforceZero reacted to fireon's post in the thread Any way to enable Guest Firewall by default? with Like.
Hello @SetEnforceZero and welcome to the Proxmox Community. You could solve that using VM templates. Then you can preconfigure the firewall in the template according to your needs. In addition, I there is also Cloud-Init support if you need.
-
66equj5 reacted to proxuser77's post in the thread Ich möchte Proxmox neu aufsetzen - Was sollte ich verändern? with Like.
Was ist dann schon vorhanden und was müsstest du kaufen? Performancetechnisch profitiert Proxmox nicht gross von einer NVMe, die VMs/LCXs je nachdem aber schon. Und du häöttest weniger "wear" auf der tendentiell teureren NVMe SSD, wenn das OS da...
-
Aa.woll posted the thread [SOLVED] Phänomen mit PMG v9.1.0. und Regelsatz mit mehreren Aktions-Elementen in Proxmox Mail Gateway (Deutsch/German).Hallo zusammen, vielleicht hat jemand von Euch eine Idee zu folgendem: Ich habe eine Regel gebaut, die prophylaktisch E-Mails mit Archivanhängen automatisch in die Quarantäne zieht. Das funktioniert. Sie sollte aber als zweite Aktion den...
-
-
bbgeek17 replied to the thread VirtIO Block or IDE.Hi @Sisdyiyy , welcome to the forum. We have covered the performance comparison between the windows controllers in our KB here: https://kb.blockbridge.com/technote/proxmox-optimizing-windows-server/part-4.html Hope it helps in your decision... -
Jjdnu replied to the thread VFIO: Firmware has requested this device have a 1:1 IOMMU mapping.Hello everyone, Is anyone able to get past this issue, MS-A2 PCI passthrough with bios 1.03? Apparently BIOS rollback to 1.02 is a high risk, with a potential to brick the device.
-
Aa.woll replied to the thread Einstellungen Mail Filter (Block-/Welcomelist).Na hier: Du gehst auf die Admin-WebGui. Dann hast Du die zentralen Einstiegspunkte links im Menü. Im gelbmarkierten Feld, wählst Du die gewünschte Empfänger_Adresse aus. Gibt es die nicht, kannst Du die mit "Add" anlegen und dann die...
-
