Latest activity
-
IITPugilist reacted to jdancer's post in the thread Migrated VMware ESXi of Linux VM to Proxmox 8.2.2. After Migrated -Booting Linux VMs into Rescue mode with
Like.
My reply also works for 8.2.x https://forum.proxmox.com/threads/d...t-works-with-vmware-pvscsi.144806/post-652170 -
Vverishare posted the thread Is It Possible to Reduce or Remove VM Fingerprints in Proxmox? in Proxmox VE: Installation and configuration.Hi everyone, I'm running a Windows virtual machine on Proxmox to test some software. However, the software immediately detects that it's running inside a virtual machine and changes its behavior because of that. I'm curious if there's a way to...
-
DDeQuzzie reacted to waltar's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
In my opinion even mixed data makes sense to experiment of as the result would show to others how this feature can or cannot be useful to them.
-
DDeQuzzie reacted to daanw's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
If it is "worth it" depends on a lot of things. My use case was archiving as much as possible data on single server with all disk slots used. A 1.3 dedup ratio is not much, but on archiving for example 100TB of data it results in quite a bit of...
-
Vverishare replied to the thread How to Reduce SSD Wearout in Proxmox?.Latest update on my SSD wear level. It's only gone up by 1% since my last post. Overall, from October 14, 2025 until today (July 29, 2026), the wear has increased from 8% to 14%. Things seem to be improving now since I'm no longer running heavy...
-
Ttangshuai replied to the thread The cloned virtual machine failed to start.我在网页界面挂载时选择了4.1版本，但是无法正确克隆虚拟机，经检查发现自动协商达到了4.2版本。后来我在/etc/pve/storage.cfg里自行添加了options vers=4.1， 现在克隆虚拟机就可以正常了。
-
Ssannsor posted the thread Proxmox VE 9.1 installation process does not recognize keyboard and mouse in Proxmox VE: Installation and configuration.Hello Everyone, I start to install Proxmox VE version 9.1 on HP Tower Server Z400 Workstation-V3, during booting process it can select "Install Proxmox VE (Graphical) and install but after it shows Proxmox VE Installer with Abort and Agree...
-
Ddas1996 reacted to Davidegb's post in the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares with Like.
I've not suffered from instability since I upgraded to kernel 7.0. My installation is completely up-to-date. Current versions are: # uname -a Linux proxmox 7.0.14-6-pve #1 SMP PREEMPT_DYNAMIC PMX 7.0.14-6 (2026-07-20T14:45Z) x86_64 GNU/Linux #...
-
CUsing S3 backend you just have to provide a 64GB datastore used as a cache, and let PBS doing everything else. I already used a 32GB datastore to backup around 250GB on s3 every day, it just works.
-
AAaronOpfer posted the thread IPv6 ND packets dropped by PVEFW-HOST-IN ctstate INVALID in Proxmox VE: Networking and Firewall.Hello, I had an odd issue on my home network where I have a proxmox lab host. I have a vmbr0 bridge that bridges a NIC to my large L2 network that my VM guests and my pve host also share. I wanted the vmbr0 to obtain an IPv6 EUI-64 address...
-
LLonelyLou reacted to Davidegb's post in the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares with Like.
I've not suffered from instability since I upgraded to kernel 7.0. My installation is completely up-to-date. Current versions are: # uname -a Linux proxmox 7.0.14-6-pve #1 SMP PREEMPT_DYNAMIC PMX 7.0.14-6 (2026-07-20T14:45Z) x86_64 GNU/Linux #...
-
SHello, I migrated a Windows Server 2003 VM from VMware to Proxmox. I tested different disk bus types, but the VM only boots when using VirtIO Block or IDE. I have already installed the VirtIO drivers, but it still fails to boot when I switch the...
-
Hhspindel posted the thread feature request: delete multiple snapshots in Proxmox VE: Installation and configuration.In the Proxmox GUI, it would be nice to select multiple snapshots and issue one delete command. Currently each snapshot must be deleted individually.
-
SSisdyiyy replied to the thread Migration of windows server 2003.hi adrianovf, can you share me the virtio iso that you've used. thank you
-
Bbroadway replied to the thread [Community project] Proximo — an open-source, least-privilege MCP/API layer for managing PVE with an AI agent (feedback wanted).MeyerGru - from one to another - Thank you! Seriously, no matter what my own mental health would normally want to react with or feed into - this whole message is the exact thing Ive been looking for and you've delivered enough to be cited in the...
-
Ccomplexplaster27 replied to the thread Let's Encrypt DNS Validation through CNAME Alias.Hello all, I managed to get this working with acme-dns, here's my Step by Step how I did it (sorry for all the redactions, gotta keep some stuff secure) So our Corporate DNS doesn't allow API but i can log into it to create the CNAME TXT record...
-
-
VPlease actually check your write amount before needlessly implementing things like that.
-
Vverishare replied to the thread Loud Fan Noise on Dell OptiPlex 7010 Running Proxmox - How to Diagnose?.I haven't resolved this issue yet, but I really appreciate everyone who has taken the time to share their suggestions and experiences. It truly means a lot. Once I've found a solution or made some progress, I'll be sure to post an update. Thanks...
-
Bbrnogu replied to the thread VM freezes when passthrough RTX 3080 to Windows 11 on Proxmox 9.2.3.Hello @driley Sorry for the delay. I had to find the right time to collect the traces. VM-Config: agent: 1 balloon: 0 bios: ovmf boot: order=scsi0;net0;ide0 cores: 16 cpu: host efidisk0...
-
Cchell replied to the thread Ceph error: /dev/pve/data_tmeta: after upgrade 20.2.1 to 20.2.2.Thank you. That did the trick. I added this file to recreate the links on boot. /etc/tmpfiles.d/pve-links.conf # save to /etc/tmpfiles.d/pve-links.conf # Type Path Mode UID GID Age Argument L+ /dev/pve/data_tmeta -...
