Latest activity
-
Iivenae replied to the thread [TUTORIAL] Backup RAW image oder ZFS_SEND -> restic.Nun gibt es Logfiles im direkten Vergleich: | size | time ----------------------------------- VZDump/Zstd | 278 GB | 38 min zfs_send full | 363 GB | 55 min zfs_send diff 1. | 3.2 GB | 1 min zfs_send diff 3. | 30...
-
QQ-wulf replied to the thread Faster VM moves between two nodes with node-local ZFS pools (per-blocksize storages).PVEVERSION: proxmox-ve: 9.2.0 (running kernel: 7.0.14-4-pve) pve-manager: 9.2.4 (running version: 9.2.4/5e5ae681198514d4) proxmox-kernel-helper: 9.2.0 pve-kernel-5.15: 7.4-13 pve-kernel-5.13: 7.1-9 proxmox-kernel-7.0.14-4-pve-signed: 7.0.14-4...
-
QQ-wulf posted the thread Faster VM moves between two nodes with node-local ZFS pools (per-blocksize storages) in Proxmox VE: Installation and configuration.SETUP - 2 nodes, PVE 9.2.3 (kernel 7.0.14-4-pve, EFI). No shared storage. - Cluster history: originally built on PVE 7, upgraded through to PVE 9 (so some storage naming/layout predates current versions). - Each node has its own local ZFS...
-
JJohannes S replied to the thread Proxmox cluster split after FritzBox Update.Corosync expect quite low latency ( <5ms ) see https://pve.proxmox.com/wiki/Cluster_Manager#pvecm_cluster_network Achieving this over wan is quite difficult if not impossible. Which usecase do you need a cluster for? Maybe the Datacenter-Manager...
-
JUm das Thema NAS noch weiter aufzubauschen..... - Altpacken soll aber extrem gut laufen https://xigmanas.com/xnaswp/ - sehr junges Projekt aber macht einen guten Eindruck. Per Proxmox VM kurz mal getestet...
-
JOMV ist ja nichts anderes als ein FreeNAS Fork mit Debian und einer schicken GUI. Wenn Du das Teil noch kennst, dann bist du da auf der richtigen Schiene. 1. OMV benötigt eine "kleine" Platte nur für das OS 2. Dann am besten nach der...
-
Bberprinzess replied to the thread Grundsatz für Shared Storage.Um das Thema NAS noch weiter aufzubauschen..... - Altpacken soll aber extrem gut laufen https://xigmanas.com/xnaswp/ - sehr junges Projekt aber macht einen guten Eindruck. Per Proxmox VM kurz mal getestet...
-
Ssotm replied to the thread Destroyed HDD with passthrough?.Is this answer AI generated?
-
OUpdate on the diagnosis, and I owe you an apology — my "probably not dead" call was wrong. Looking at the dmesg output, the disk itself is the problem, not the controller or Proxmox. The key lines: ata3: SATA link up 6.0 Gbps (SStatus 133...
-
Ddaanw replied to the thread No Network / Internet after Reboot!.Like I said, I'd start by disabling tailscaled and docker and first get your Proxmox host going again. systemctl disable --now tailscaled docker containerd systemctl networking restart (or reboot) Then check the output of ip a and ip r. It...
-
Wwendellrodriguez replied to the thread Windows 10 VM freezing ramdomly.Great news.
-
M@Max Eagle you where right - copy paste error - I am so blind! thanks
-
Fferengie replied to the thread Increase Size of HD Space root.@Max Eagle you where right - copy paste error - I am so blind! thanks
-
FYou appear to have plenty of drive space. Check your Message Size in PMG settings. CONFIGURATION > MAIL PROXY > OPTIONS Mine is set for: 104857600 (bytes)
-
MMax Eagle replied to the thread Increase Size of HD Space root.You appear to have plenty of drive space. Check your Message Size in PMG settings. CONFIGURATION > MAIL PROXY > OPTIONS Mine is set for: 104857600 (bytes)
-
Fferengie replied to the thread Increase Size of HD Space root.
-
-
MMax Eagle replied to the thread Increase Size of HD Space root.
-
Fferengie replied to the thread Increase Size of HD Space root.Hi, I try to connect via telnet 25 on the PMG to send a testmail - there I got this message
-
OMV ist ja nichts anderes als ein FreeNAS Fork mit Debian und einer schicken GUI. Wenn Du das Teil noch kennst, dann bist du da auf der richtigen Schiene. 1. OMV benötigt eine "kleine" Platte nur für das OS 2. Dann am besten nach der... -
IITCowboy replied to the thread No Network / Internet after Reboot!.so do i need to look at the renaming aspect or what are you suggesting for the ifupdown issue? I agree with your assestment just unsure what next steps would be
