Latest activity
-
Ssantiagobiali reacted to t.lamprecht's post in the thread Kernel 6.17 - End of Support after July with
Like.
Hello, Given that ubuntu upstream is in process of phasing this kernel out, and we're already now spending considerable amount of engineering time to handled backporting (security) fixes on top of upstreams work, we decided to go through with... -
Llonger replied to the thread EFI disk0 snapshot problem.Please share the vm config: qm config [VMID]
-
Kkanemari replied to the thread [SOLVED] NVIDIA 580.x + Kernel 7.0 incompatibility on Trixie.I normally use the .run files as well. can you pls post the link to the run file you used?
-
Uuzumo replied to the thread [SOLVED] Some Windows VMs start with incorrect clock.I understand that the service has been stopped, but I think it’s going too far to recommend taking actions that aren’t normally taken—especially when it’s merely a response from an LLM. To configure this properly, I recommend consulting someone...
-
Kkanemari reacted to alexskysilk's post in the thread [SOLVED] NVIDIA 580.x + Kernel 7.0 incompatibility on Trixie with Like.
I have 580.173 working fine. I dont use the apt packages as nvidia doesnt seem to care about Trixie support, but the NVIDIA*.run installer works without a hitch.
-
Daniel-Doggy reacted to t.lamprecht's post in the thread Kernel 6.17 - End of Support after July with Like.
Hello, Given that ubuntu upstream is in process of phasing this kernel out, and we're already now spending considerable amount of engineering time to handled backporting (security) fixes on top of upstreams work, we decided to go through with... -
Kkfietz replied to the thread NVMe Over TCP - Proxmox VE.Hey! just sharing my two cents here of what I have tried so far. nvme-cli vs nvme-stas: We recently had this conversation with a customer. First we configured it with nvme-cli natively, but this turned out to be rather complex. It works, but...
-
Nnhh replied to the thread Detected Hardware Unit Hang - Pve Host verliert quorum und wird unresponsive.Danke
-
Nnhh reacted to woma's post in the thread Detected Hardware Unit Hang - Pve Host verliert quorum und wird unresponsive with Like.
Hört sich nach einem bekannten Problem der E1000 NIC an. GIbt neben zahlreichen englischen Threads auch diesen hier: https://forum.proxmox.com/threads/pve-umgebung-und-guests-teilweise-nicht-erreichbar-logs.184189/#post-856796
-
Nnhh reacted to Impact's post in the thread Detected Hardware Unit Hang - Pve Host verliert quorum und wird unresponsive with Like.
Ja, ist sehr bekannt.
-
Wwoma replied to the thread Detected Hardware Unit Hang - Pve Host verliert quorum und wird unresponsive.Hört sich nach einem bekannten Problem der E1000 NIC an. GIbt neben zahlreichen englischen Threads auch diesen hier: https://forum.proxmox.com/threads/pve-umgebung-und-guests-teilweise-nicht-erreichbar-logs.184189/#post-856796
-
Nnhh replied to the thread Detected Hardware Unit Hang - Pve Host verliert quorum und wird unresponsive.KI hat vorgeschlagen: [Unit] Description=Disable TSO/GSO/GRO on eno1 (e1000e I219 TX hang workaround) After=network.target [Service] Type=oneshot ExecStart=/sbin/ethtool -K eno1 tso off gso off gro off [Install]...
-
Mmstinaff replied to the thread [SOLVED] Failed Proxmox 9 Upgrade From v8.4.16.I ran into the exact same issue as the original post, however I had run apt dist-upgrade from the start (so that wasn't what caused your problems r3set) I did run the above to resolve the apt_pkg missing issue, then dpkg -i --force-overwrite...
-
Aalavime replied to the thread [SOLVED] Some Windows VMs start with incorrect clock.Hi Steve! So today I faced a similar issue: - Windows server 2019 vm under proxmox. - The timezone and time on proxmox is set correctly. - For the windows vm, the option "Use local time form RTC" is set to yes. - The timezone of the windows vm...
-
BBerndZ replied to the thread Upgrade von 6.3-2.Was sagt Ihr denn zu diesem Exemplar https://www.amazon.de/dp/B0CJF6CFLP?ref=emc_p_m_5_i_atc
-
jsterr reacted to t.lamprecht's post in the thread Kernel 6.17 - End of Support after July with Like.
Hello, Given that ubuntu upstream is in process of phasing this kernel out, and we're already now spending considerable amount of engineering time to handled backporting (security) fixes on top of upstreams work, we decided to go through with... -
JJohannes S replied to the thread Upgrade von 6.3-2.Und den alten könnte man noch als ProxmoxBackupServer oder/und Reservesystem für Notfälle nehmen.
-
JMehrere Möglichkeiten Zum einen könntest das mit WinSCP kopieren. Oder wenn vorhanden, eine externe USB Platte anklemmen, diese Mounten und kopieren. Hätte auch den Vorteil, wenn diese später als Verzeichnis eingebunden wird, das der restore...
-
JSie haben zwei Möglichkeiten: Die erste Möglichkeit ist die schrittweise Aktualisierung Ihres Systems: - Aktualisieren Sie Ihr System auf Proxmox 6.4: apt update && apt full upgrade - Aktualisieren Sie Proxmox 6 auf 7...
-
JOffenbar bist du hier im speziellen Proxmox- und im allgemeinen Linux-Kontext noch nicht sehr sattelfest. Vollkommen unabhängig vom gewählten Weg empfehle ich daher dringend ein RESTORE, bis hin zur laufenden VM bzw. Container im Vorfeld, zu...