Latest activity
-
JJohannes S replied to the thread Richtiges Setup für Heimserver.Bleibt das dann im gleichen Gehäuse oder hast du dir dann auch ein neues besorgt? Mit der alten Hardware könntest du dir einen Backupserver mit ProxmoxBackupServer einrichten, dafür sollte es auf jeden Fall reichen (halt envtl. etwas langsam bei...
-
Kkaushal_shah posted the thread iSCSI storage configuration problem in Proxmox VE: Installation and configuration.I am facing issue with the iSCSI storage configuration. I have Proxmox Hypervisor 9.2.4. I configured iSCSI target and LVM on iSCSI but storage not visible on the Hypervisor. Not sure but one of the reason it shows question mark on iSCSI-LVM...
-
-
JHallo zusammen, danke nochmal für die weiteren Antworten. Aktueller Stand. Ich habe jetzt eine der 60gb SSDs für Proxmox VE genutzt. Also kein ZFS für das OS. Dann eine der 256gb SSDs für die VMs, auch ohne ZFS, diese werde ich dann regelmäßig...
-
Gg.fiore replied to the thread HA Cluster Manager stuck in wait_for_quorum after rejoining cluster node (PVE 8.4.0).Before assuming HA is broken — is there a chance the behavior you're seeing is actually the expected state for a cluster with no HA resources configured? The pve-ha-manager source has explicit logic for this: if the cluster has no services...
-
Mmfausin replied to the thread Richtiges Setup für Heimserver.Hallo zusammen, danke nochmal für die weiteren Antworten. Aktueller Stand. Ich habe jetzt eine der 60gb SSDs für Proxmox VE genutzt. Also kein ZFS für das OS. Dann eine der 256gb SSDs für die VMs, auch ohne ZFS, diese werde ich dann regelmäßig...
-
JJohannes S replied to the thread [SOLVED] neue PVE Installation: RAM Verbrauch ~66%, ZFS?.Naja, mit Linux versus BSD hat das vermutlich wenig zu tun ;) Ich bin mir sicher, dass wenn du z.B. ein OpenWRT drauf gepackt hättest oder irgendein minimalistisches Linux (z.B. alpine) auch nur wenig RAM-Verbrauch hättest. Solche...
-
Sspatcho replied to the thread [TUTORIAL] FROM NOTHING: Physical disk with Windows 11 as VM + GPU pass-through.Also registered an account to thank you for this guide ! Worked flawlessly . Proxmox 9.2.4, Aorus 650. AMD 9300x3d, Nvidia RTX 5080 Couldn't reuse my existing install, it had a dual boot, the windows install was sane, not bit locked, but I...
-
JJohannes S reacted to grefabu's post in the thread [SOLVED] neue PVE Installation: RAM Verbrauch ~66%, ZFS? with
Like.
Und voila: Nehme ich die Intel X722-DA2 raus habe ich gleich weniger RAM Allocation! Es sind zwar immer noch rund 6GB, aber die onboard Ethernet Adapter kann ich ja nicht ausbauen,... Das habe ich aber bewußt noch nie gehabt. Aber die anderen... -
Ccrawrj replied to the thread [SOLVED] Issue with Spice and no Mouse on one VM.Thank you for the help! Yeah, it is a weird one. Especially since Novnc works fine. I would love to get the error, but could you tell me how to get them? The client is Windows 11, and Spice works for every other machine except this one, which was...
-
Ggea posted the thread Random problems with large zfs send or filesync transfers over encrypted c-stream tunnel in Proxmox VE: Networking and Firewall.I see random problems on large replications on Proxmox even with todays napp-it cs v26.06f. If you have similar problems, read (use Chrome with on the fly translation ger->en) and report...
-
KKeeper of the Keys posted the thread Useful crashreports in Proxmox VE: Installation and configuration.Hey I was just messing around with network settings on a proxmox+ceph cluster and I managed to trigger reboots in both nodes that I was messing with. The changes I had made caused the nodes to not be able to see each other properly (I basically...
-
Ggrefabu replied to the thread [SOLVED] neue PVE Installation: RAM Verbrauch ~66%, ZFS?.Noch etwas interessantes: Installiere ich auf der Hardware ein OPNsense wird nur 714 MB RAM verbraucht. Eigentlich war mein Ziel die OPNsense virtuell zu betreiben, auch im Bewußtsein, dass es da viele Gegenstimmen gibt. Aber gerade für...
-
THi, the new node maintenance mode is a great addition to Proxmox, thank you! Running sudo ha-manager crm-command node-maintenance enable pve01 worked perfectly. However, it'd be really nice to be able to manage maintenance state directly from...
-
T+1 for an easy way to enable a node's maintenance mode. On the node's top line in the right pane (besides the "Shutdown" and "Reboot" buttons) would be a nice place. Or in the node's context menu (right click). And as previously stated: this...
-
jsterr reacted to Francois Baillargeon's post in the thread Switching between i440fx and q35 with Like.
It may be related to TPM requirements of modern Windows such as Windows 11 that are not supported on 440fx. -
Bbishoptf replied to the thread Node to node migration without a cluster.Yeah Ive tried that, one node show up in the top but in the bottom pull down no nodes are available for selection. I have 2 nodes that I have added and they show up fine, both running 9.x version and the latest PDM version. Why I asked since no...
-
Francois Baillargeon replied to the thread Switching between i440fx and q35.It may be related to TPM requirements of modern Windows such as Windows 11 that are not supported on 440fx. -
Ccheplv replied to the thread Automated Proxmox VE 9.1 Deployment via MAAS.Had success with installing Debian 13 with MBR on HPE DL360 Gen7 with Maas and custom cloudinit script which installs proxmox version. Debian 13 MBR image was build with packer.
-
SSatyam Kushwaha posted the thread HA Cluster Manager stuck in wait_for_quorum after rejoining cluster node (PVE 8.4.0) in Mail Gateway: HA Cluster.Hello Proxmox Support, We have a 3-node Proxmox VE 8.4.0 cluster. Environment: - 3 nodes - Corosync quorum is healthy - pmxcfs is healthy - watchdog-mux is running on all nodes - All nodes are running PVE 8.4.0 - No HA resources are currently...
-
FFrankList80 reacted to grefabu's post in the thread [SOLVED] neue PVE Installation: RAM Verbrauch ~66%, ZFS? with Like.
Und voila: Nehme ich die Intel X722-DA2 raus habe ich gleich weniger RAM Allocation! Es sind zwar immer noch rund 6GB, aber die onboard Ethernet Adapter kann ich ja nicht ausbauen,... Das habe ich aber bewußt noch nie gehabt. Aber die anderen...
