Latest activity
-
GGMBauer replied to the thread VMs mit mehr als 2 GB RAM starten nicht durch - PVE läuft nested auf Hyper-V.Ja, hab ich auch. Aber doch nicht in Hyper-V... Das ist so wie einem Berhardiner einen Pferdesattel aufzuschnallen und dann reiten zu wollen.
-
Ggrefabu replied to the thread [SOLVED] neue PVE Installation: RAM Verbrauch ~66%, ZFS?.Und voila: Nehme ich die Intel X722-DA2 raus habe ich gleich weniger RAM Allocation! Es sind zwar immer noch rund 6GB, aber die onboard Ethernet Adapter kann ich ja nicht ausbauen,... Das habe ich aber bewußt noch nie gehabt. Aber die anderen...
-
Ggrefabu replied to the thread [SOLVED] neue PVE Installation: RAM Verbrauch ~66%, ZFS?.Ich habe das System jetzt mal Q%D neu bespielt. Extra ohne ZFS. Die RAM Auslastung ist die selbe hohe! Ich nehme mal die PCIe Ethernetkarte raus.
-
jsterr replied to the thread Switching between i440fx and q35.Windows OS-Selection in the vm wizard defaults to q35 so changing it might bring some benefits in performance even though your not using pci-pt? -
jsterr reacted to Francois Baillargeon's post in the thread Switching between i440fx and q35 with
Like.
Normally it will trigger a licensing change as it's lots of changing hardware, but I might be mistaken. Why do you need to change otherwise? All it mostly does is expose PCIe so you can assign PCIe devices directly (like a GPU etc) You can... -
Francois Baillargeon reacted to IsThisThingOn's post in the thread Quality of life update - Ram selection with Like.
Complicated solution to an easy problem. Proxmox should just remove the MiB. Instead, do it like most other software. Allow the user to input Number X plus M or G. Like 512M or 4G. -
AAlexHK reacted to fabian's post in the thread Proxmox crashes/reboot after upgrading packages with Like.
not really - needrestart already comes with a list of "special" units/.. preloaded, it just doesn't know about PVE/PBS/PMG services ;) this is also the case for any other custom service you run that has special requirements, out of the box...
-
Francois Baillargeon replied to the thread VMware import script sanity check.It seems sensible but testing on a guinea pig server is always best. If you want to facilitate your import direcly to VirtIO you can also install the virtio drivers before on the vmware side too, it was written by my coworker, it always comes in...
-
Francois Baillargeon replied to the thread Switching between i440fx and q35.Normally it will trigger a licensing change as it's lots of changing hardware, but I might be mistaken. Why do you need to change otherwise? All it mostly does is expose PCIe so you can assign PCIe devices directly (like a GPU etc) You can...
-
dcsapak replied to the thread [SOLVED] Issue with Spice and no Mouse on one VM.hi, Can you check if the spice client (remote-viewer) has any errors on the cli? What OS do you use on the client? did not yet see such behavior, so no idea currently why that shouldn't work. I440fx vs q35 should not make a difference. can... -
Ffrankz replied to the thread Unable to remove kernel.Here’s what I noticed the first time I ran into the ESP‑full issue and went through the cleanup procedure: when I mounted the ESP on the production nodes, the kernel files were not located in the root of the partition. The layout was slightly...
-
Ggrefabu replied to the thread [SOLVED] neue PVE Installation: RAM Verbrauch ~66%, ZFS?.Ich setze das System evtl. einfach noch mal frisch auf! Ich würde mich dann melden, wenn das Prblem immer noch besteht. In dem System sind ja auch viele Ethernet Adapter. Auch noch eine zusätzliche 10GBs Karte über PCIe. Kann so etwas...
-
Ggrefabu replied to the thread [SOLVED] neue PVE Installation: RAM Verbrauch ~66%, ZFS?.VMs: 1x 8192 und 1x 4096, sind aber beide aus. LXCS: benutze ich nicht.
-
JJohannes S replied to the thread [SOLVED] neue PVE Installation: RAM Verbrauch ~66%, ZFS?.Wieviel RAM hast du VMS und lxcs zugewiesen?
-
JJohannes S replied to the thread Bcachefs storage plugin for Proxmox VE.For the Record: I also agree with the Kerbel developers Position. But Overstreet argued that he should get a pass so people could recover their data. If the Argument for violating rules is that it‘s necessary to avoid dataloss then the Code...
-
Ggrefabu replied to the thread [SOLVED] neue PVE Installation: RAM Verbrauch ~66%, ZFS?.Hi, das hatte ich schon mal mit htop gemacht es sah harmlosa aus. Hier die Ausgabe: root@meddv-pvegw01:~# top -o%MEM -c -b -n 1 -w 120 | head -n 25 top - 11:16:28 up 52 min, 4 users, load average: 0.31, 0.33, 0.27 Tasks: 300 total, 1...
-
Wwoma replied to the thread [SOLVED] neue PVE Installation: RAM Verbrauch ~66%, ZFS?.Nächster Schritt wäre eine Liste der Prozesse sortiert nach RAM Nutzung, z. B. top -o%MEM -c -b -n 1 -w 120 | head -n 25
-
JStimmt, HAOS offiziell nur als VM. Was in so nem LXC läuft ist ja auch kein HAOS, sondern HA Core (der Community-Script-Weg). Läuft bei vielen problemlos, aber ohne Add-on-Store/Supervisor und eben unsupported. Für nen Einsteiger der nicht...
-
JI am not aware of anything that would reconfigure the new NIC with the static IPs of the old one. But someone else might be. With some powershell magic that is deployed to the guest before the migration, something is surely possible. But my...
-
JJ-Rod replied to the thread Node to node migration without a cluster.Is it possible you are missing the step that you need to click the "Target Remote" pull-down in the Migrate menu and change to the other remote before selecting the target node?