Latest activity
-
Gg.fiore replied to the thread Corosync logging flooded with "retransmit list" entries — when to worry, when to ignore.+1 to UdoB's point — this trips up a lot of people and it's worth underlining. "Dedicated VLAN" and "dedicated wire" solve completely different problems. A VLAN tag protects you from L2 broadcast domain contamination and gives the switch...
-
Hhohl reacted to nd-2999's post in the thread [SOLVED] PBS 4 upgrade on a Dell NX3230, doesn't fully boot. with
Like.
@Onslow - great news, enabling SR-IOV Global and I/OAT DMA fixed the issue and the NX3230 now boots up nicely into PBS4. Steps for the fix: Enter BIOS: Power on the NX3230 and press F2 when the Dell logo appears to enter the System Setup... -
CI wanted to share an opensource tool (Rust, AGPL v3) I’ve been working on called HuskHoard. If you’re tired of cold, untouched files consuming 3x raw block storage across your OSDs, this might help. HuskHoard runs on your CephFS gateway node. It...
-
DDeerom posted the thread [SOLVED] Are there mitigations available for CVE-2026-53359 'Januscape' in Proxmox VE: Installation and configuration.Hi Everyone, I've just read from the openwall-security mailling that there is a new Guest-to-Host KVM explot called 'Januscape'. It seems to impact VMs which have the 'nested-virtualization' flag enabled, however for large multi-tenant service...
-
TEventuell schreibst du mal dein komplettes Setup auf. Es gibt da viele Stellschrauben, gerade bei HPE Hardware kann man einiges optimieren.
-
JJ-Rod replied to the thread [SOLVED] Problem on Migrating Windows Server 2003.Does the imported VM boot in Safe Mode?
-
9982134098123 replied to the thread Remote VM Console Errors Out.Opened Bugzilla: https://bugzilla.proxmox.com/show_bug.cgi?id=7795
-
JJ-Rod replied to the thread Vmware migration with Vcenter down.I am concerned that you didn't know about the host client. Where is your sys admin? Also, it's not much work to spin up a new vCenter instance, using the 60 day evaluation mode. Then you'll have full functionality while you transition, if you...
-
9982134098123 replied to the thread Remote VM Console Errors Out.In the PDM Syslog i just get this error: Jul 7 08:32:24 24-PDM-01 proxmox-datacenter-api[569]: GET /api2/json/pve/remotes/13-PVE-01/qemu/100/vncwebsocket?port=0&vncticket=XXX: 403 Forbidden: [client [::ffff:172.25.201.194]:51620] permission...
-
UdoB reacted to proxuser77's post in the thread Frage zum Freitag: Desktop Environment on top of PVE with Like.
Noch eine kleine Anmerkung: Das klang jetzt vielleicht alles ein wenig zu absolut. Deshalb noch einmal: Ich möchte hier niemandem "verbieten", einen Desktop auf seinem Proxmox-Host zu installieren. Wenn du weißt, was du tust, und dir zu helfen... -
Mmicneu reacted to proxuser77's post in the thread Frage zum Freitag: Desktop Environment on top of PVE with Like.
Noch eine kleine Anmerkung: Das klang jetzt vielleicht alles ein wenig zu absolut. Deshalb noch einmal: Ich möchte hier niemandem "verbieten", einen Desktop auf seinem Proxmox-Host zu installieren. Wenn du weißt, was du tust, und dir zu helfen...
-
Pproxuser77 replied to the thread Frage zum Freitag: Desktop Environment on top of PVE.Noch eine kleine Anmerkung: Das klang jetzt vielleicht alles ein wenig zu absolut. Deshalb noch einmal: Ich möchte hier niemandem "verbieten", einen Desktop auf seinem Proxmox-Host zu installieren. Wenn du weißt, was du tust, und dir zu helfen...
-
cheiss replied to the thread Updating remotes fingerprint via command line.FWIW; if you're using Let's Encrypt (or other public certificate provider which are trusted by default on a system level by Debian), this isn't an issue. Since these certificates are trusted on a system level, you can just remove the pinned... -
Sslavik-f reacted to mortise's post in the thread Passthrough RTX 6000/5090 CPU Soft BUG lockup, D3cold to D0, after guest shutdown with Like.
These messages are related to the GPU being put into a power sleep state, and not being able to be activated in time for the VM. vfio-pci 0000:02:00.0: Unable to change power state from D3cold to D0, device inaccessible vfio-pci 0000:02:00.1...
-
Dd.oishi replied to the thread Vmware migration with Vcenter down.You can migrate VMs from ESXi even without vCenter Server. There are several methods, but I think it would be best to first try the “Automatic Import of Full VM” method. https://pve.proxmox.com/wiki/Migrate_to_Proxmox_VE...
-
Mminorsatellite reacted to ggoller's post in the thread Creating a Tunnel on a Guest VM where OVS Bridges, Interfaces and Tunnels are Present with Like.
You can just add the VM to the existing ovs bridge and leave the VM interface untagged. This should make it an access port and it should allow all vlans.
-
DdonB posted the thread Vmware migration with Vcenter down in Proxmox VE: Installation and configuration.Is it possible to migrate VMware clients that are on individual VMware host servers? Our Vcenter server is no longer available, but the clients are up and running on VMware hosts that were in a cluster. currently 5 hosts with many running windows...
-
Uuzumo replied to the thread [SOLVED] Problem on Migrating Windows Server 2003.Are you trying to ask an AI or something? I never said anything like that. If you don’t feel like reading it, you don’t have to, but that won’t fix the problem. It goes without saying that achieving your goal requires effort on your part...
-
OOrbitalCanon replied to the thread [SOLVED] Problem on Migrating Windows Server 2003.Well, I agree with that. However, our organization does not have plan to do upgrade or redevelopment, so we only rely on currently running VMs.
-
OOrbitalCanon replied to the thread [SOLVED] Problem on Migrating Windows Server 2003.so, what do you want to say is to change the configuration on machine to the newest version, is it correct?