Latest activity
-
BBZB Sistemi reacted to b345's post in the thread [TUTORIAL] Hp smart array p420i HBA mode complete guide. with
Like.
i take 0 responsibility on any unexpected problem with your systems. do this at your own risk, it works for me, i've done 3 times already. Happy hacking :) ----------------------------+ the pdf attached has some screenshots along with the... -
YaZoal replied to the thread Severe I/O performance degradation on Windows VMs (Server 2022) on Proxmox 8/9.But the bug report mentioned for win server 2022 [0]: "It's all about Windows Server 2025 platform" Anyone had the issue on win server 2022? [0] https://github.com/virtio-win/kvm-guest-drivers-windows/issues/1453 -
iprigger replied to the thread Subscription status: "invalid: subscription information too old".Just as a heads-up: Removing the license, resetting it and re-adding it did the trick. No idea as of why this happened. Tobias -
TGenerell ist die LOAD bei Linux eine etwas "silly metric" (so die Linuxkernelentwickler: https://github.com/torvalds/linux/blob/master/kernel/sched/loadavg.c ), da sie eben nicht nur CPU-Auslastung sondern auch andere Sachen wie IO...
-
iprigger replied to the thread Subscription status: "invalid: subscription information too old".Hi All, I have the same issue on one node: checktime: 1780104636 key: pveXc-XXXXXXXX message: subscription information too old nextduedate: 2026-08-28 productname: Proxmox VE Community Subscription 1 CPU/year regdate: 2013-08-28 00:00:00...
-
Ccesa01 posted the thread Thin LV cannot be activated (-ENODATA) despite valid metadata and readable ext4 filesystem in Proxmox VE: Installation and configuration.Hi everyone, I'm trying to recover data from a Nextcloud storage volume after an unexpected failure and I'm running out of ideas. The goal is data recovery only (mostly family photos). I don't care about restoring the container itself. I found...
-
Ffabian69420 replied to the thread [SOLVED] Can't get Nvidia GPU passthrough to work on LXC.i removed the vfio-pci through modprobe -r vfio-pci then it became this: 01:00.0 VGA compatible controller: NVIDIA Corporation GA104 [GeForce RTX 3060 Ti] (rev a1) Subsystem: PC Partner Limited / Sapphire Technology Device a632...
-
Ttomservo replied to the thread Problem with zfs and setfattr.So not quite what I was thinking. The property security.capability is in the security namespace for xattrs, which I believe can be controlled by a security extension in the kernel (like selinux or apparmor). Even root can't write to that...
-
AAntijurist replied to the thread Reach Proxmox host from remote LAN (wireguard, OPNsense).Sorry, of course Wireguard in running on Opnsense which is running in a VM which runs on proxmox.
-
Aahra replied to the thread [SOLVED] It is not possible to use both a VLAN-aware bridge and a Linux VLAN bridge on a single physical NIC..Thinking about it, it seems obvious that this wouldn't work. When nic_1 receives an Ethernet frame with VLAN tag 30, if there are two bridges with the same VLAN ID, it might not function correctly. Please close this issue. I think my...
-
RRum_YR posted the thread Clock Skew Detected Among Monitors (Health_Warn) in Proxmox VE: Installation and configuration.Hello Proxmox Team, I am running a 3-node Ceph cluster (ceph1, ceph2, and ceph3). Currently, ceph1 is configured as the primary local time source, while ceph2 and ceph3 use Chrony to sync their time from ceph1. Recently, ceph3 experienced an...
-
WI just ran into a similar problem in a Proxmox 8 ==> Proxmox 9 update: After adding a V9 Node to the cluster, logging into the Web UI only worked on the new node, logging into the old nodes failed with the error: authentication failure...
-
Ffabian69420 replied to the thread [SOLVED] Can't get Nvidia GPU passthrough to work on LXC.this is what i get. also i used to think node meant CT/VM, so i re-checked but apparently the node is the host right? anyhow this is on the host: # lspci -vnnk | awk '/VGA/{print $0}' RS= nvidia-smi pct config CTIDHERE 01:00.0 VGA compatible...
-
JJohannes S replied to the thread Searching for Proxmox Backup Server Provider.I run PBS on a netcup vserver . There are also PBS as a Service providers like Inett or tuxis.nl
-
JJohannes S reacted to j.theisen's post in the thread My vm (home assistant) will not startup - get timeout - don't know how to fix this with Like.
Hi, no worries! Here is most likely your problem. You set the Size and Min Size parameters for your Ceph pool both to 3. This means that as soon as you lose one of your OSDs or respectively the PGs on that OSD, the remaining two copies of the...
-
Stoiko Ivanov replied to the thread Postfix main.cf Template Bug in current 9.1 branch.the config does work though? - I agree that this can be improved and would become more readable - but want to make sure that I don't miss something here? -
Aahra posted the thread [SOLVED] It is not possible to use both a VLAN-aware bridge and a Linux VLAN bridge on a single physical NIC. in Proxmox VE: Networking and Firewall.auto nic1_1.10 iface nic1_1.10 inet manual auto nic1_1.20 iface nic1_1.20 inet manual auto nic1_1.30 iface nic1_1.30 inet manual auto VLAN102030 iface VLAN102030 inet manual bridge-ports nic1_1 bridge-stp off bridge-fd...
-
-
Hhanoon reacted to geormanth's post in the thread [SOLVED] [pve8] kernel: EDID has corrupt header with Like.
Hello, The problem still exists, here is my solution. (UEFI Boot) Create a blacklisting configuration file: nano /etc/modprobe.d/blacklist-matrox.conf Paste the following line to prevent the Matrox video driver from loading: blacklist...
-
Hhidigoudi replied to the thread io_uring on kernel 7.0.6-2-pve (PVE 9.2.3): guest disk I/O errors (EIO) + filesystem XFS shutdown.Some news : I was able to reboot one of the both Proxmox host on Kernel 6.17.13-13-pve and retry the same process / same stress write test (30 minutes of stress). I confirm that there is no issue on this kernel version. So it seems to be a...
-
Rrobinwagner posted the thread Searching for Proxmox Backup Server Provider in Proxmox Backup: Installation and configuration.Hi everyone, I'm currently looking for a Proxmox backup server. The server can be virtual; what's important to me is that it's a reputable provider that offers me my own virtual backup server. I don't need that much storage space either—1–2 TB...
