I used this article to solve it. This will only work if you have a single Exchange server setup. Also, I'm not entirely sure if this approach works in a DAG environment.
On PMG, the only thing you need to do is change the relay port from 25 to 2525.
Did you restart FRR, or did you re-apply the SDN configuration? frr.conf.local is managed by the PVE stack, so you'd need to re-apply the SDN configuration. You can check the generated config via the newly introduced dry-run functionalilty before...
Das Journal mit "jounalctl" einfach mal durchsehen, was an Meldungen protokolliert wird.
Dann die Größe beschränken, oder das einfach manuell mittels "journalctl --vacuum-size=1000M" mal reduzieren
Google suche hilft auch...
Im Sinne eines Catch-All-Postfaches zum Weiterversand?
Theoretisch per Weiterleitung. Ist aber nicht schön.
Du darfst nicht vergessen, dass DKIM in der letzten Instanz angewendet werden sollte. Das müsste also auf dem Smarthost passieren...
I suspect this to be the case, do the firewalls have the same MAC address? How does failover happen exactly? Is it VRRP or something else?
You could verify if it's related to ARP / neighbor table entries by flushing the neighbor table instead of...
Its currently possible to create a clone from a snapshot of the source VM (Those are full clones currently):
There exist a feature request to Create linked clone of VM from a snapshot [0].
[0] https://bugzilla.proxmox.com/show_bug.cgi?id=7521
Quick follow-up — solved (or rather, tamed) it. Posting the full picture for the
archives.
Root cause was a mix of three things:
1) Default balancer pace is fine for all-flash, too aggressive for spinning rust.
2) osd_max_backfills and...
After moving to the Linux 7.0 kernel (7.0.6-2-pve) that became the new default with PVE 9.2.x, I encounter I/O failures on some VMs on the host and it starts throwing hard I/O errors (EIO) on its virtual disk, which makes the guest filesystem...
Confirmed this is now working as I expected (took a bit of playing around with route maps, but got there). With 3 containers, each on separate host, and looking at routes from a router to that peers to all 3:
ubnt@core01:~$ show ip route...
For scrub we use zabbix lld with regex
maybe cou can create an cronjob with snapping the result from
zpool status <pool>
...
scan: scrub repaired 0B in 00:00:13 with 0 errors on Sun Jun 14 00:24:14 2026
...
We tried 3 different operators, most likely there is a connection problem between Türkiye and Proxmox, this problem has been going on for about 6-7 months.
Tracing route to at1.cdn.proxmox.com [45.144.208.36]
over a maximum of 30 hops:
1...
Hello,
I'm running PMG 9.1, but this issue actually started back in version 9.0.7.
Whenever I try to change any setting in the Web GUI (like toggling a checkbox or changing a dropdown selection), I get the following error:
update config section...
Hello,
I am migrating from Exchange 2010 to Exchange 2016 and I have an issue with recipient verification on Proxmox Mail Gateway.
Environment:
- Proxmox Mail Gateway 9.1.0
- Old mail server: Exchange 2010
- New mail server: Exchange 2016 CU23...
Hello, did you run a traceroute enterprise.proxmox.com?
In Germany over O2 VDSL 50 MBit download speed i got:
7 Hops to enterprise.proxmox.com:
$ traceroute enterprise.proxmox.com
[cut]
4 lag2.0002.corp.02.fra.de.net.telefonica.de (62.53.9.53)...
Ok, dass die dyn. IP das größte Problem ist, hatte ich ja schon vermutet. (Mich wundert trotdzem, dass die anderen Provider wie z.B. web.de, gmx usw die Mails von unserem Mailserver problemlos annehmen. Im Moment wüsste ich es nur von der...
Check if there are still leftover files in /etc/pve/nodes/<deleted-node>.
As long as there are files still in there, the node will show up in the UI.
Please make a backup of the files before you delete them, just to be safe!
I've tried mobile, fiber, and in different cities, and they all have the same problem; it's not downloading. If it worked for you, could you please share the Google Drive link?
I had to remove memtest86+ package and run script to remove memtest from ESP
/EFI/memtest86+x64.efi
/loader/entries/memtest86+x64.efi.conf
/memtest86+x64.efi
BIOS manipulations break OVH Boot modes and not recommneded by OVH