Latest activity
-
Ggfngfn256 reacted to janus57's post in the thread Secure Boot – Microsoft UEFI CA 2023 Certificate Not Included in EFI Disk with
Like.
Hi, It's normal; your package comes from SID and not Trixie. First why do you have SID configured on your PVE (it should not, and can potentially break stuff, like that) ? Second, you should use the Trixie version. See : Trixie ... -
JJohannes S reacted to woma's post in the thread Join new node to existing cluster with TFA enabled with Like.
Not tried it by myself but CLI should work: https://forum.proxmox.com/threads/cluster-join-with-2fa-oath.44131/ There is no need to "remove" 2FA as there is an enable/disable checkbox. So you could temporarily disable root 2FA while joining that...
-
JNot sure if this will solve the problem, but what I did is create a script using the System Daemon to automatically adjust the NIC settings I stated above when the server reboots. I will monitor for a week and if no further crashes, will update here
-
Hhermannw replied to the thread Backup Server as a VM and pass through drive.Thanks, Lukas. That sounds great. Let's see if I can pull it off with my rudimentary Linux skills. At least I have a lab environment that I can easily rebuild without any issues. What do you mean by “+ a USB-Drive as external datastore for...
-
Jjanus57 replied to the thread Secure Boot – Microsoft UEFI CA 2023 Certificate Not Included in EFI Disk.Hi, It's normal; your package comes from SID and not Trixie. First why do you have SID configured on your PVE (it should not, and can potentially break stuff, like that) ? Second, you should use the Trixie version. See : Trixie ...
-
DDarkGhost replied to the thread Keyboard issue in VM consoles.I tried the browser my distro came with (Konqueror) and did not have an issue. In doing so I was reminded of a Vivaldi browser setting that I had recently changed. I found in the Vivaldi settings Privacy and Security section, under Website...
-
Dd3FC0N replied to the thread Secure Boot – Microsoft UEFI CA 2023 Certificate Not Included in EFI Disk.root@PVE:~# apt policy python3-virt-firmware python3-virt-firmware: Installed: 25.12-1 Candidate: 25.12-1 Version table: *** 25.12-1 500 500 http://ftp.dk.debian.org/debian sid/main amd64 Packages 100 /var/lib/dpkg/status...
-
DDarkGhost replied to the thread Keyboard issue in VM consoles.I am using Vivaldi. I saw some old stuff about a similar issue with Firefox. This just started very recently, I've never had a problem with Proxmox before. It did not seem to happen as a result of anything I have don't. I also keep having an...
-
Rrombar replied to the thread Join new node to existing cluster with TFA enabled.unless you have recovery codes - cannot be disabled
-
CColin 't Hart replied to the thread Where pve-network-interface-pinning store it's configuration?.And I came here after I installed PBS on top of an existing old-many-times-upgraded Debian install. The network interface wasn't initialised as it should. It turned out to be a different issue, but when I compared it to my new PBS install, I...
-
Hhwm.land posted the thread WARNING: Pool 'rpool' has encountered an unrecorrectable I/O failure and has been suspended. after update in Proxmox VE: Installation and configuration.I updated Proxmox and kernel was updated `6.8.12-23-pve` => `6.8.12-29-pve` After reboot machine did not start fully, it ended up with repeating message each several seconds: WARNING: Pool 'rpool' has encountered an unrecorrectable I/O failure...
-
Wwifijedi replied to the thread [SOLVED] Fix: NVIDIA Drivers Failing after upgrade to Proxmox 9.2.2 (Kernel 7.0.2-6-pve) / NovaCore Conflict.I was a little hasty and jumped to conclusions. In a nutshell I was correct about the nvidia drivers preventing the kernel upgrade. I simply had to uninstall the Nvidia driver, then the kernel upgrade proceeded without issue. I simply reinstalled...
-
CColin 't Hart reacted to stv.Bundesadmin's post in the thread Where pve-network-interface-pinning store it's configuration? with Like.
AFAIK /etc/systemd/network/ is a good place for .link files - /etc/ really is the first place i would look for them. (We've had it there since 7.x and still in 9.2; we pin manually with more insightful names than the pinning tool nowadays...
-
CColin 't Hart reacted to reg_ed's post in the thread Where pve-network-interface-pinning store it's configuration? with Like.
I came here to ask the question about whether there is a good reason that I shouldn't move my .link files to /etc/systemd/network (which is where the man pages seem to suggest they should be anyway) so I was pleased to find this thread at the top...
-
JJohannes S reacted to fiona's post in the thread Kubernetes overlay networking breaks when upgrading from PVE 9.1 to PVE 9.2.3 with Like.
We are still investigating the root cause. Another workaround should be using machine version 10.1 for the affected VMs.
-
JJohannes S reacted to fschauer's post in the thread Configuring low level LXC options via API with Like.
If you really have to create a container with lxc.* parameters via the API and your use case cannot be solved via the exposed parameters, then yes, cloning a prepared template is the only option I can think of.
-
JJohannes S reacted to fabian's post in the thread Configuring low level LXC options via API with Like.
you can set the environment with the `env` parameter and a PVE hookscript with the `hookscript` one (both are root only IIRC). arbitrary low level options are intentionally not exposed on the API.
-
JJohannes S reacted to fschauer's post in the thread Configuring low level LXC options via API with Like.
Not via the API. The available phases in a hookscript are pre-start, post-start, pre-stop, and post-stop. Depends on what your goal is. The env parameter sets the environment variables inside the container. They do not apply to hook scripts.
-
Rrobertkwild replied to the thread pve 9.1.1 to 9.2.my bad theres a no subscription for ceph
-
SSeed replied to the thread [TUTORIAL] How to Build a New Kernel to Support ASMEDIA Controllers.With surveillance video (9x4k) constantly writing to both disks for 12 hours, so far it's been stable and no issues.