community sub is below basic, but still a valid sub, so all the messages are correct.
you have subs everywhere, just not on a high enough level to be eligible for enterprise support on PDM.
What is the context of your /etc/pve/storage.cfg? does it contain "node" restriction by chance?
Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
Hi,
Well, bad RAM generally produces crash / reboot (application and/or whole unit) / segfault.
An OOM is more when there is not enough RAM and eventually can happen if you use a server with ECC and the server detects the faulty stick and...
Hi.
I have 2 seperate pve's joined them in a cluster.
At first i couldnt because i already had made a vm in the joining one.
So i made a backup of it and removed the vm. then i could join it.
But now, the joining pve vm/iso/etc storage is no...
Hi,
adding the abi version like suggested in the documentation works for me:
[I] root@pve9a1 ~# head /etc/apparmor.d/usr.sbin.ntpd
# vim:syntax=apparmor
#include <tunables/global>
abi <abi/3.0>,
/usr/sbin/ntpd flags=(attach_disconnected) {...
Thanks daanw, much appreciated! I ran the following command and will keep monitoring PVE for any potential hardware unit hangs.
ethtool -K eno1 gso off gro off tso off
Hi,
Well, bad RAM generally produces crash / reboot (application and/or whole unit) / segfault.
An OOM is more when there is not enough RAM and eventually can happen if you use a server with ECC and the server detects the faulty stick and...
The nodes should at least actually be counted by what we pay for, by socket.
Our single socket development nodes with paid community subscriptions count as much against me as my dual socket (2x price) basic subscriptions count for me.
Any chance on some flexibility for licensing? I have a decent size install base across a few datacenters., but all of my development test nodes are licensed under community as I don't need support from Proxmox, so I either remove them to get...
Thanks daanw, much appreciated! I ran the following command and will keep monitoring PVE for any potential hardware unit hangs.
ethtool -K eno1 gso off gro off tso off
Hi,
This sounds more like a hardware/BIOS issue than a Proxmox issue, since the system works fine after a full power off and only has trouble on reboot.
You may want to check the BIOS boot settings again (especially Fast Boot / boot mode), and...
Kam in meinem Post 'rüber, dass ich gegen Ceph bin? In meiner viel zu kleinen Umgebung hatte ich mich am Ende mangels Ressourcen dagegen entschieden...