Latest activity
-
MSee: https://forum.proxmox.com/threads/solved-pve-kernel-e1000e-0000-00-1f-6-eno1-detected-hardware-unit-hang.172564/ https://forum.proxmox.com/threads/e1000-driver-hang.58284/
-
JJohannes S reacted to jebbam's post in the thread Cluster not quorate - extending auth key lifetime! with
Like.
I think that may have solved it. The machines had their times sync'd after boot (e.g. after running a minute), but there is a very small window where it was out of sync in the first few seconds presumably during services starting. I guess the... -
Aalexskysilk replied to the thread Migrating from read-only file system.In that case, all you need is the lxc config files (/etc/pve/lxc/*.conf.) simply copy those to your destination hypervisor, make sure the storage is mounted and the store presented in pvesm using the same name and away you go. Why is your root...
-
Hherezy posted the thread BUG: proxmox mail gateway FROM = null bypass spam filtering in Mail Gateway: Installation and configuration.Good day, I have been having 2 issues. 1. When an email is received with a null from field it bypasses all the spam filtering. As well It does not show up in the Tracking Center at all. 026-05-29T12:57:03.346227-04:00 mail postfix/qmgr[1131]...
-
Hi, Have you followed the upgrade guide[0] ? I personally upgraded my PBS3 to 4, 3 days ago, and it's work like a charm. [0]https://pbs.proxmox.com/wiki/Upgrade_from_3_to_4 Best regards, -
Mmgaudette112 replied to the thread [SOLVED] New 9.2 install - can't find 7.0.2-6-pve , not all the time.In the end, there must have been a weird partition somewhere. I used ShredOS to wipe both disks and, finally, Proxmox installed with no issue.
-
Iitsnota2ma replied to the thread Ubuntu 26.04 installation fails for unknown reason.Veeam was able to install it's own VM for migrating, and I have migrated over one VM (although it will not boot because it cannot find it's drive). So I do not understand why the Veeam VM works...
-
Ddaanw reacted to andregoncalvespires@gmail's post in the thread Proxmox Freezing (new instalation) 9.2.2 - Intel 12700T with Like.
It's too early to celebrate, but it seems one of the RAM sticks failed the memtest in both combined and isolated tests. I've replaced it with a new stick and will monitor the situation. Thank you for prompting a test I was reluctant to do...
-
Aandregoncalvespires@gmail replied to the thread Proxmox Freezing (new instalation) 9.2.2 - Intel 12700T.It's too early to celebrate, but it seems one of the RAM sticks failed the memtest in both combined and isolated tests. I've replaced it with a new stick and will monitor the situation. Thank you for prompting a test I was reluctant to do...
-
Jj.a.duke replied to the thread Migrating from read-only file system.I'm still seeing the same read-only error regarding the log file location using your suggestion. I couldn't create a new mount point, but I was able to mount the temp drive at an existing location which wasn't being used. To figure out which...
-
Ffsckedagain posted the thread Moving existing PBS from VMWare workstation to PVE cluster in Proxmox Backup: Installation and configuration.Is this a decent idea or no? And if it's ok, how do I go about doing this task? I only had it on VMWare because I have a lot of storage on this PC, but now I am using s3 storage and don't need all the local space. I would like to have it in my...
-
Llukeh990 posted the thread [SOLVED] Does eBGP SDN fabric support external peering? in Proxmox VE: Networking and Firewall.I was playing with the eBGP SDN fabric and noticed that there was no mention of peering with stuff that isn’t PVE nodes. Say if I wanted to announce a default route from a different router, how would I do that? All I really control is the...
-
TTErxleben reacted to RolandK's post in the thread Frage zu Best Practice: Automatisches Hochfahren der VM nach Stromausfall? with Like.
ich denke auch dass man das pauschal überhaupt nicht beantworten kann. es hängt total vom use case ab. wichtigkeit datenkonsistenz vs. wichtigkeit dienste-verfügbarkeit und und und.
-
Ddaanw replied to the thread Proxmox GUI hang - not response.Looks like either a disk going bad, a loose cable preventing proper I/O or a mdadm error? The filesystem might have gone into read-only preventing further damage, explaining the system stall. What do cat /proc/mdstat and smartctl -a /dev/sda...
-
FFocusPocus replied to the thread Roblox VM detection - can be overcome?.show me your ways..
-
Jjanus57 replied to the thread Bug: PDM 1.1 not recognizing valid license status.Hi, What is the license level on all your servers ? Best regards,
-
Ddaanw replied to the thread Ubuntu 26.04 installation fails for unknown reason.That does not look very related. You can also keep journalctl -ef and dmesg -wT open while trying the install and see if that tells you anything. Did you try to write on the SAN from the host?
-
FFrank-75 posted the thread Proxmox GUI hang - not response in Proxmox VE: Installation and configuration.Good evening, I'm also attaching this because I've had these errors since last night and had to reset the server with the power button. However, the VMs inside are working: I found consecutive logs, but the PVE interface can't be reached from the...
-
Ddaanw replied to the thread proxmox-kernel-7.0.2-6-pve failing network service.Similar behavior indeed, but no reference to that in the 6.x bootlog. Hopefully @ArcWeaver is able to collect some more/complete logs of problematic boots.
-
Jjamespanic posted the thread Bug: PDM 1.1 not recognizing valid license status in Datacenter Manager: Installation and configuration.I have 7 PVE servers and 1 PBS server all with valid license. PDM's license manager correctly shows that status however it shows "Too many remote nodes without active basic or higher subscription" when I try to access the enterprise repo for updates.