Latest activity
-
SSunilkumar reacted to jackdaw's post in the thread Making sense of NVMe zfs and SMART errors with
Like.
Hope you’re all well. I have a question that’s been wrecking my head for months now. I have a 3 node cluster (Dell PowerEdge R7525) with the following drive configuration: Node 1: 10x 2TB NVMe KINGSTON SKC2500M82000G in raidz2 Node 2: 10x 2TB... -
Ddaveanderson replied to the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host./etc/network/interfaces contents: Basic gist is: two LACPs, each containing two of the ports, each nic has one port for each of the two LACPs (thus a nic card dying entirely should be ignored) of those two bonds: po7 / bond0 is for use by VMs...
-
SOVH Cloud https://eco.ovhcloud.com/de/soyoustart/
-
Shttps://www.vautron.de Nicht die günstigsten am Markt, dafür aber mit sehr kompetenten und engagierten Mitarbeitern. Individuelle Absprachen zu Hardware, Verkabelung, Serverstandort oder anderen Anforderungen sind jederzeit möglich. Domains...
-
SAls Tipp https://host-unlimited.de/dedizierte-server-mieten Schau mal rein.
-
SHallo Nachdem ich Hardwareprobleme mit einem Ded. Server bei Hetzner hatte und Hetzner die Preise massiv angehoben hat suche ich folgendes: Root Server für die Installation von Proxmox Kennzahlen: ca. 32 bis 64 GB ECC, 16 Cores, Raid 1 mit 2x...
-
SDouble post, please see the other thread: https://forum.proxmox.com/threads/pve-9-apparmor-errors.183926/
-
SAll of my upgraded hosts are throwing this error. No guests. No LXC containers. No nothing there. Just an empty, upgraded host. Throwing errors. [353827.192186] audit: type=1400 audit(1780020537.902:27110): apparmor="DENIED"...
-
SBios Update did the trick. There was one newer version available. After Update the Bios, everything is working, incl. Secure Boot. Thanks.
-
SVery annoying if a cold start works but a reboot doesn't! It seems that BIOS somehow doesn't find the harddisk or EFI partition after a reboot. To confirm; by going into the BIOS after a reboot you don't see the disk and the boot option there? I...
-
SI reinstalled VE 8.4 and this is running out of the box, with the same BIOS Settings. I also tired install Debian Tixie, works out of the Box. Strange that only by request a reboot the system stuck. If i poweroff and power on again, it's working...
-
SMaybe a BIOS update or a Linux kernel update (as this is not specific to Proxmox) will fix it in the future. If you want a work-around then search for the kernel parameter reboot= in the Linux documentation...
-
SHi everyone! I’m running Proxmox on a NiPoGi AK2 Plus MiniPC (n100, 1 TB, 16GB RAM) Everything works great for the most part – VMs are running fine, access works perfectly, and everything seems to be smooth… except for one annoying issue...
-
SSunilkumar reacted to qhash's post in the thread Proxmox 8.4.1 Fresh Install BCM57416 10G Ethernet Adapter Not Recognized with Like.
Hi, I am planning to buy 2 or 3 supermicro servers with that LAN adapter. I wonder whether you have had any issues with them so far?
-
SSunilkumar reacted to unholyfaith1's post in the thread Proxmox 8.4.1 Fresh Install BCM57416 10G Ethernet Adapter Not Recognized with Like.
HI, Further troubleshooting led me to the BIOS where I saw the NIC AOC wasn't even discovered there. I re-seated the NIC and then it worked fine out of the box. Thanks for spending the time to address this issue.
-
SSunilkumar reacted to dakralex's post in the thread Proxmox 8.4.1 Fresh Install BCM57416 10G Ethernet Adapter Not Recognized with Like.
Hi! Thanks for reaching out, there's another user that seems to have similar problems [0]. It would be helpful to have more information, could you provide a boot log for the system? Does the NIC have the most recent firmware on it? [0]...
-
SSunilkumar reacted to unholyfaith1's post in the thread Proxmox 8.4.1 Fresh Install BCM57416 10G Ethernet Adapter Not Recognized with Like.
Hi all, I just purchased a super micro server recently with their BCM57416 10G ethernet adapter and after a fresh install I dont see anything in lspci that refers to the device, nor in dmesg. I'm guessing maybe the drivers are missing? Do I...
-
HHammyHavoc reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.1 released! with Like.
We are pleased to announce the release of Proxmox Datacenter Manager 1.1! This point release focuses on expanding visibility and automation for large-scale, multi-site deployments. Our main focus for this iteration has been introducing...
-
shanreich replied to the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host.Could you post your full network configuration? I've seen several reports now and usually they were using some BCM cards with bonds and VLANs, but I couldn't yet tie them together... cat /etc/network/interfaces -
Ttomten replied to the thread QEMU 11.0 available on pve-test and pve-no-subscription as of now.Not the person you replied too but I tested and it didn't work with 10.2.1-2 but did with 10.1.2-7, I have a realtek nic though and my problem was internal dns didn't work in my k3s node.