Latest activity
-
RResidentDataHoarder replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.I am losing my sanity with this. :( I noticed the DMS was still there for pve5 If I try to purge out everything related to "pve5" in ceph, it tells me it doesn't exist. Then if I try to go back and re-add it, it errors out saying its already in...
-
Ddaanw reacted to Impact's post in the thread Proxmox only allow 100GB of disk space for VM data with
Like.
Guests are supposed to go to local-lvm/data which is a lot bigger than 100G. The simplified gist is that the OS needs a file system while guests use block storage. LVM is just a volume manager so to have a file system you need to create a volume... -
MMors replied to the thread Problem with backup (kvm: warning: host doesn't support requested feature).Yes, I am aware of the CPU limitations in this machine (i7-3770) and of the way the backup is performed - via QEMU, if I remember correctly. What I am wondering about is whether, in such a situation, it would not be desirable for PVE to...
-
RolandK replied to the thread Problem with backup (kvm: warning: host doesn't support requested feature).>It looks like PVE is a bit overzealous in checking VM CPU compatibility. no, you simply have set your virtual cpu to x86-64-v3 and your host cpu won't support the requested features (AVX2 instruction set for example) -
ZHi, Just note for anyone who will use it on Btrfs (default fs for Synology), be careful with the 'storage array based snapshots'. Avoid long term snapshots and large chains, be careful with automatic scrubbing and check Btrfs health permanently...
-
ZAfter being a bit inspired by the awesome Nimble Plugin that was released I decided to use a little of my downtime on Vacation to try and give the same thing a go, but using Synology/DSM as the storage backend. This will allow you to use iSCSI...
-
RolandK replied to the thread Proxmox only allow 100GB of disk space for VM data.you need to read into linux lvm logical volume management basics. there are lot of tutorials and information on the net
-
TTErxleben replied to the thread Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs?.Wenn jemand über sowas berichtet, schärft das natürlich den Blick und man stolpert dann über Dinge, denen man sonst keine Beachtung schenkt. Gerade wenn es offenbar nur ein Schönheitsfehler ist, denn diese VM läuft genauso wie ihre 8 Kumpels...
-
RolandK replied to the thread file system issue with block device passthrough.>/dev/disk/by-id/usb-TO_Exter_nal_USB_3.0_2015033100081-0:0 is how the drive shows up in the VM. maybe i did USB passthrough instead of storage passthrough? yes >i don't see it in any of the config files tho. most likely this entry: usb0...
-
Mmax1337 replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.which ifreload does not return anything here is the output of stat /usr/sbin/ifreload File: /usr/sbin/ifreload -> ../share/ifupdown2/ifupdown2 Size: 28 Blocks: 0 IO Block: 4096 symbolic link Device: 252,1 Inode...
-
Ddjpatrizo posted the thread Proxmox only allow 100GB of disk space for VM data in Proxmox VE: Installation and configuration.Hi, I have a 930DB data for my proxmox server. After installed the partition okly show 100GB of diskspace available... I have checked all disk space has already assigned to the pv and the vg. After I have deploy several VM machine and is...
-
-
Ccyb3rx reacted to Gilberto Ferreira's post in the thread Proxmox Datacenter Manager 1.1 released! with Like.
You can install it inside a VM. You will see all your clusters, vms and PBS. You'll can start, shutdown, stop, migrate vm from one node/cluster to another. But to set vm parameters, you still need to open the webui from that target. Pretty sure...
-
Jjanus57 replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.Hi, You should take a look at the manual of your hardware because if your backplane doesn't have an expander, then your single cable may not work like you think. If you have doubts, you can post the part number. Best regards,
-
RResidentDataHoarder replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.I am back, I did forget to mention, I did try this workaround already https://forum.proxmox.com/threads/ceph-osd-creation-error.136839/
-
Ttomasich replied to the thread PBS backup space grow up constantly.I don't understand, Namespace are created to organize backups, what is wrong?
-
GGilberto Ferreira replied to the thread Proxmox Datacenter Manager 1.1 released!.You can install it inside a VM. You will see all your clusters, vms and PBS. You'll can start, shutdown, stop, migrate vm from one node/cluster to another. But to set vm parameters, you still need to open the webui from that target. Pretty sure...
-
Ddaanw replied to the thread Proxmox not rebooting properly.Very annoying if a cold start works but a reboot doesn't! It seems that BIOS somehow doesn't find the harddisk or EFI partition after a reboot. To confirm; by going into the BIOS after a reboot you don't see the disk and the boot option there? I...
-
shanreich replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.This is very odd... can you post the output of which ifreload stat /usr/sbin/ifreload apt-cache policy ifupdown2 -
Mmax1337 replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.Hi Stefan, when I try to run ifreload -avd I get permission denied (logged in as root). This seems strange to me. By the way here are the outputs of ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen...
-
Bbahril reacted to rellek74's post in the thread Help with UEFI boot issue after PVE 9 upgrade with Like.
in case it helps anyone... For me, I had to boot into recovery and install grub-efi-amd64. apt install grub-efi-amd64 reboot
