Latest activity
-
jebbam replied to the thread Cluster not quorate - extending auth key lifetime!.Ok. I rebooted nh5, then created the nh5-journal-boot-fresh.txt file. Note: the PVE services start on boot, so they try to run. Then I stopped the services, this it the nh5-journal-boot-stopped.txt file. Then I started the services again, in... -
fiona replied to the thread After PVE 8to9 upgrade, unable to check guest fs freeze status.No, the commands related to freeze all have an "enabled" : false,. Are you sure this actually worked in Proxmox VE 8? I think it might just not have logged the failure to execute the commands, because of a bug, see... -
Ccyb3rx replied to the thread Proxmox Datacenter Manager 1.1 released!.where can we install it? do we need a dedicated host (hardware server)? Is it similar to VMware vCenter for managing VMs and networks centrally? can we install it as VM on proxmox cluster like with VMware?
-
AAzapa replied to the thread file system issue with block device passthrough.this is all from the host: :~# fdisk -l /dev/disk/by-id/usb-WD_easystore_266A_575838324431324148413836-0:0 Disk /dev/disk/by-id/usb-WD_easystore_266A_575838324431324148413836-0:0: 4.55 TiB, 5000947302400 bytes, 9767475200 sectors Disk model...
-
shanreich replied to the thread SDN EVPN IP-VRF and MAC-VRF panels are empty, but vtysh shows correct routes.sent a patch that should fix this issue: https://lore.proxmox.com/pve-devel/20260528133947.309145-1-s.hanreich@proxmox.com/T/#u -
QQuasimodro replied to the thread Proxmox not rebooting properly.I reinstalled VE 8.4 and this is running out of the box, with the same BIOS Settings. I also tired install Debian Tixie, works out of the Box. Strange that only by request a reboot the system stuck. If i poweroff and power on again, it's working...
-
Gg4r0s replied to the thread SDN EVPN IP-VRF and MAC-VRF panels are empty, but vtysh shows correct routes.Thank you for the tip! Clearing the 'Nodes' field to apply the zone cluster-wide fixed the issue. The error only seems to occur when all nodes are explicitly defined in the configuration.
-
Gg4r0s reacted to shanreich's post in the thread SDN EVPN IP-VRF and MAC-VRF panels are empty, but vtysh shows correct routes with
Like.
Seems like this is caused due to wrong handling of the nodes field in the zones configuration. If you don't have any additional nodes besides pve{1,2,3} you could just remove the nodes in the nodes field for now, then the EVPN zone will be... -
RResidentDataHoarder replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.May potentially be this? The device type shows unknown in LVM. As mentioned the wiring changed to the backplane, instead of using 4 individual sas cables to each port on the backplane I'm using the stock supermicro cables that take 1 link from...
-
shanreich replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.Is there any error output when running ifreload -avd ? This creates quite a bit of output, so it might be best to boot the failing kernel, run the command and save it into a text file, reboot into the working kernel and then download the...
-
jebbam replied to the thread Cluster not quorate - extending auth key lifetime!.Yes, only nh5 was rebooted. It didn't come up correctly when it booted up, but running the above command sequence got it going correctly again.
-
abied-charreton reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.1 released! with Like.
We are pleased to announce the release of Proxmox Datacenter Manager 1.1! This point release focuses on expanding visibility and automation for large-scale, multi-site deployments. Our main focus for this iteration has been introducing... -
RResidentDataHoarder replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.Everything is on the latest version no apparent errors with the HBA or anything adjacent. If you have any specific commands you want me to try please let me know, I'll check them as soon as I get back, have to go to my uncles for a few, 30...
-
TTErxleben replied to the thread Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs?.Hab die Version mal von einer ältlichen Version auf 285 gehoben. Keine Änderung. PVE meldet volle Auslastung. Client-VM meldet intern 2GB. Ballooning ist aktiv. VM läuft ohne Auffälligkeiten. info balloon und WebGUI zeigen gleicher Werte.
-
Mmax1337 replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.Hello, I seem to have the same issue. Updated Proxmox from 8 to 9 and one of my two servers ended up not having a functioning network connection afterwards. ip a does list the onboard nic which was used before as eno1 but vmbr0 does not appear...
-
shanreich replied to the thread SDN EVPN IP-VRF and MAC-VRF panels are empty, but vtysh shows correct routes.Seems like this is caused due to wrong handling of the nodes field in the zones configuration. If you don't have any additional nodes besides pve{1,2,3} you could just remove the nodes in the nodes field for now, then the EVPN zone will be...
-
Aalex-off reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.1 released! with Like.
We are pleased to announce the release of Proxmox Datacenter Manager 1.1! This point release focuses on expanding visibility and automation for large-scale, multi-site deployments. Our main focus for this iteration has been introducing...
-
Gg4r0s replied to the thread SDN EVPN IP-VRF and MAC-VRF panels are empty, but vtysh shows correct routes.Browser Console: GET https://172.16.30.101:8006/api2/json/nodes/pve1/sdn/zones/evpnzone/ip-vrf Status 500 Not an ARRAY reference at /usr/share/perl5/PVE/API2/Network/SDN/Nodes/Zone.pm line 379. VersionHTTP/1.1 Transferred454 B (115 B size)...
-
Vvaschthestampede replied to the thread Unexpected backup failures.You're right, but that's a problem for another day. :)
-
jsterr replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.Are there any differences regarding kernel on those nodes? the ones that work and the one that does not? Do you have any errors on node-site regarding the disks (not ceph related) but storage-device related (host bus adapter etc.)?