Latest activity
-
JIch habe mich heute mal damit beschäftigt wie man VMs in Masse oder gezielt über Ansible oder Terraform ausrollen kann. Hier meine kleine Mitschrift https://pad.cooltux.net/MB4j0lq1S_CzII7zs0r66A Grüße
-
Ddrom posted the thread kernel 7.0 performance issue with zfs pools in Proxmox Backup: Installation and configuration.Hello I wish to report a drastic loss of performance with the 7.0 kernel as soon as it implies operating with zfs pools. I run 2 of these, one is a single raidz2 array of 12 4TB sas hard disks, the other has 2 raidz2 arrays of 8 600GB sas hard...
-
Ich habe mich heute mal damit beschäftigt wie man VMs in Masse oder gezielt über Ansible oder Terraform ausrollen kann. Hier meine kleine Mitschrift https://pad.cooltux.net/MB4j0lq1S_CzII7zs0r66A Grüße -
Jjklocker replied to the thread How pools use the space.Which endpoints are you using to get the pool size? One thing to double-check: get /nodes/<node>/storage/<id>/status returns values in GiB/TiB, while the web displays them as GB/TB.
-
GGMBauer replied to the thread Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs?.Ich glaube, ich habe sehr weit oben geschrieben, dass der Jumping Point der Cache-Speicher vom DSM ist. Der wird in der Speicheranzeige der DSM-Software ignoriert, aber halt natürlich nicht vom HV. Und dann balloont sich natürlich auch nichts...
-
Ddea replied to the thread Problem on LTO-9 with kernel 7.0.x.I’m terribly sorry. PBS 4.2.0 with kernel 7 works fine, even with LTO. The problem was with LTO; when I rebooted the system (to downgrade the kernel), it started working again, and I mistakenly thought that was where the problem lay. Thank you...
-
fiona reacted to daanw's post in the thread proxmox-kernel-7.0.2-6-pve failing network service with
Like.
You can cycle back by appending -1, -2, -3, etc. For example, journalctl -b -1 is the bootlog before the current boot. -
fiona replied to the thread After PVE 8to9 upgrade, unable to check guest fs freeze status.The status command was not used previously, but that doesn't explain why your guest agent claims the commands are disabled. You can check the commandline the qemu-ga process was invoked with with ps aux | grep qemu-ga. What does cat...
-
fiona replied to the thread Virtual machine freezes with IO error.Please share the full journal, not just warnings. Are you using CommVault or Naviko as a backup solution? In the log it can be seen that something creates NBD block devices and maybe the issue is related to that. The output of echo '{"execute"...
-
Rrrob replied to the thread ZFS with PERC H745: is RAID0 the same as JBOD?.I have switched my PERC H745 in Dell Poweredge to eHBA mode. Then Im using ZFS and CEPH to manage raid and smart on those drives. Lifecycle Controller → System Setup → Device Settings → PERC H745 → View server profile →...
-
fiona replied to the thread PVE CVE-2024-45774.Hi, the advisory does not mention grub-common either, it mentions the main packages: grub-pc-bin, grub-efi-amd64-bin, grub-efi-amd64-signed, grub-efi-amd64-unsigned Both grub-common and grub2-common are part of the same grub2 source package and...
-
YDears, I got an vulnerability notification from Qualys, it's about CVE-2024-45774, it's request to upgrade grub2-common 2.06-13+deb12u2, but the version is grub2-common 2.06-13+pmx7 on PVE. I find the Security Advisories on...
-
CChrisTG74 replied to the thread Problem with worker VM start initiated by Veeam on PVE.Seems like the plugin-update solved the problem - at least for me. The shown version number of the Proxmox plugin is now: 13.3.1.18
-
Ddaanw replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.Hard to say without any logs/journals/config, but maybe 7.0.x names the interface(s) in a different way. If for example 6.17.x names an interface eth0 and that eth0 name is used in the configurations, it won't work if 7.0.x names it nic0. If so...
-
HHaTaX reacted to Johan.cn's post in the thread Win2003/Win2k8 R2: ACPI\QEMU\VGID driver missing with Like.
Try this, works on my win2003 and win2008, just update driver on your unknown device and point to the iso drivers folder, it will search and find the correct driver for your qemuvgid...
-
NNemesiz replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.Another try: boot host with no OSD disk and then put single HDD OSD to see does it up.
-
Nneuterscooter posted the thread Proxmox Connection to Disk Shelf in Proxmox VE: Installation and configuration.I'm having issues with my Proxmox Server, I have a Dell Precision T7820 with a LSISAS9207-8E SAS Controller connected to a NetApp DS4246. Previously, when I would power cycle the Proxmox Host, my ZFS pool on the Disk Shelf would be recognized no...
-
BBlackclaws replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Could be related but tailscale is specifically UDP and not TCP so similar problems with offloading but a different datapath. Could just be that the whole off the offloading featureset is somewhat broken in some NIC combinations.
-
Mmarceloleaes posted the thread Question about status map in the api in Mail Gateway: Installation and configuration.Hello, I'm developing a PHP application to give my users access to check the status of their sent and received emails, such as whether they were received, quarantined, returned, etc. I noticed that the API returns data based on letters and...
-
-
MMarkku replied to the thread minor: grub-probe error during update.FWIW, this grub error (/usr/sbin/grub-probe: error: unknown filesystem) is still shown with PVE 9.2: root@pve-1:~# apt autoremove REMOVING: libpaper1 proxmox-kernel-6.8.12-13-pve-signed Summary: Upgrading: 0, Installing: 0, Removing: 2...
