Since I didn't get any responses here, I asked chatgpt and eventually got it worked out. I want to post my fix in case anyone else comes across the same problem.
So my sdd had a 1G partition that used to be /boot/efi (sdd2) but was somehow...
Just to clarify the orginal ask ... sda & sdb drives could not be found under any Disk create menu ... I thought maybe I was missing a step ... I just picked on LVM as an example in the pull down
Before installing any OS, I always clear the...
I just reject them temporarily with my policyguard.
If the error is a temp error, it will arrive approx. 5 min later.
If it was spam (and the sender dns is missconfigured), there is mostly no second try...
Hallo zusammen,
ich plane, meinen bisherigen lokalen Proxmox-Server in ein Rechenzentrum zu stellen. Es stehen drei öffentliche IPv4-Adressen zur Verfügung.
Ich frage mich, ob ich wirklich eine pfSense als VM brauche oder ob Routing/NAT direkt...
Thanks for the reply, however I was not able to locate Node > Disks in the menu ...
I did however finally have luck using this cmd root@pve:~# wipefs --all --force /dev/sd X .... now the drives showup in the pull down on LVM
I believe both points are valid to a certain extent.
It is entirely reasonable that Proxmox developers are compensated for their work, and subscription models are clearly appropriate for production environments. The concern many users express is...
Greetings Forum,
Running PVE 9.1.9 on a Dell T630 & a Dell T620. After a recent upgrade, no network connection. When booting into proxmox-kernel-6.17.13-6-pve from GRUB, network functions normally.
When booting proxmox-kernel-7.0.0-3-pve, 'ip...
I'm a relative novice with this stuff, so please excuse this noise if I am wrong, but that ^ smells a lot like: https://forum.proxmox.com/threads/asymmetric-tailscale-speed-issue-with-kernel-7-and-multiple-nic-types.183574/
Purpose
Inspired by Level1Techs, I decided to replace my old router with a single box solution that's flexible, upgradable, and efficient. That includes using Proxmox to utilize spare resources without interfering with the vital router...
Creating the OpenWRT LXC Container
Installing OpenWRT into a container requires downloading a special build and installing it via Shell. Sadly, we can't use the Create CT button because there's no setting for an "unmanaged" OS type, and the...
Did a new install of 9.2.2 as a test / learning session today, but stuck trying to add 2 x HD sda & sdb ... PVE is on sdc
I think I'm in the correct menu to add the drives, but none listed in the pull down (see attached)
Looked up some...
I am still experiencing this in the latest release. I have opinions about this but my short term bandaid is here. YMMV, I hope it helps someone else. For me its that I run apps on truenas. It advertises a whole bunch of internal network iscsi...
Hi everyone,
I am new to PVE but have setup most things I wanted in my test PVE.
Unfortunately, the PVE itself and all VMs/LXCs become unreachable via ethernet from time to time and become immediately reachable again as soon as I log in on the...
Ok, dank KI & OpenCode konnte ich die Ursache jetzt doch selbst finden (lassen): In "/etc/pve/priv/tfa.cfg" wurde der Zugang gesperrt mit …"totp-locked":true… . Wenn man dort das auf "false" setzt, geht es wieder. Ich lass den Post mal so stehen...
Ich wollte auf einem Hetzner Dedicated nun endlich mal das Upgrade zu PVE 9 machen. Bei den Vorbereitungen über SSH fiel mir auf, dass die Systemzeit nicht stimmt und deswegen der Login in der Proxmox-Weboberfläche nicht mehr per TOTP möglich...
It might be, that feature compatability between QEMU and kernel version "causes" this message. That means one side trying to use a feature that the other cannot deal with. Easy to try out, if you are right with your assumption.
Looking forward to...