Latest activity
-
JJohannes S reacted to Daniel-Doggy's post in the thread [SOLVED] Backup and dedupe a VM with LUKS with
Like.
Thanks for the info. I would indeed assume that only my first backup is as big as the disk itself. (Since debian by default writes garbage to the disk before adding LUKS to prevent old data leaking.) And after that just small updates as things... -
JJohannes S reacted to UdoB's post in the thread [SOLVED] Backup and dedupe a VM with LUKS with Like.
Well..., I did not verify this actively, but: yes. The backup process will copy the content of the virtual harddisk into the backup system. Whether the raw disk is encrypted or not should be completely irrelevant. At the end the virtual disk is...
-
JIn the normal situation ifupdown2 is installed and ifupdown is only removed, not purged. It's only when ifupdown is purged these files go missing. To prevent this you need a mechanism that when a package is purged it should check if its files...
-
JJohannes S reacted to Impact's post in the thread Kann Container aus Backup nicht zurückspielen: unable to restore CT - unable to detect disk size - please specify rootfs (size) with Like.
Ja. Wie kommt auf den Speicher an und kannn etwas gefährlich sein. Task Log bitte. Ein Snapshot sollte keinen wirklichen Platz benötigen.
-
SScaryGary replied to the thread Replace mirrored boot drives.This is what's using up all the space: 16K ./lost+found 4.0K ./home 4.7G ./var 66M ./dev 4.0K ./media 1.8T ./mnt 0 ./tmp 5.7M ./run 92K ./root 5.6G ./usr 4.0K ./srv 5.6M ./etc 0 ./sys 0 ./proc 448M...
-
ManDal replied to the thread BackupPilot - Desktop Backup Client für Proxmox Backup Server.Nein, leider nicht. Wir haben lediglich ein Ticketsystem, den Link dazu findest du im BackupPilot unter „Über“. Bezüglich deines Problems: Kann es sein, dass dein PBS kein vertrauenswürdiges Zertifikat verwendet? Falls ja, könnte dir folgender... -
Cchristophe replied to the thread Ceph rbd mirroring Snapshot-based not working :'(.Hi, Similar problem here, pve 9.2, ceph 19.2.3. Mirror uuid is always empty… Claude helped a lot, but is tired now. ChatGPT did it’ s best but still way behind Claude. And no Ceph rbd mirroring (image, snapshot mode)… Any step-bY-step...
-
herzkerl reacted to MaNNaM's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with Like.
Hello, here is a temporary solution to the dashboard issue: ModuleNotFoundError: No module named “smb” Simply disable the module on all MGRs and then restart them. sudo mv /usr/share/ceph/mgr/dashboard/controllers/smb.py... -
BBlodof10Chiefs replied to the thread [SOLVED] Proxmox installation error.You, good sir, win all of my internets.
-
Mmgaudette112 posted the thread [SOLVED] New 9.2 install - can't find 7.0.2-6-pve , not all the time in Proxmox VE: Installation and configuration.I reinstalled a few nodes this week-end (Dell R630) from scratch. I didn't bother wiping the disks, thinking (wrongly or not?) the regular Proxmox install would. I mention this because I am not sure if it's related. So I went through the "pvecm...
-
MSo I did my normal Proxmox system updates. (before 9.2 release yesterday) along side all my NIX and Windows 2025 updates. Reboot. My Dell R730XD couldnt find a boot disk. Just kept cycling. Used Proxmox VE 9.2 ISO to enter boot rescue via IDRAC...
-
-
MHello, I have a Proxmox server with some SAS cards: # lspci | grep SAS 51:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05) 8a:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS3416...
-
Sslavik-f replied to the thread Proxmox 9.2 installer hangs: waiting for /dev to be fully populated.Installed Proxmox from 9.1 ISO: uname -a Linux t7960 6.17.2-1-pve #1 SMP PREEMPT_DYNAMIC PMX 6.17.2-1 (2025-10-21T11:55Z) x86_64 GNU/Linux Then switched to `no-subscription` repo and upgraded: apt update pveupgrade Computer rebooted...
-
SScaryGary replied to the thread Replace mirrored boot drives.Are you saying I don't really need to replace these? It's a hardware raid 1 using ThinkSystem M.2 with Mirroring Enablement Kit, so the drives only show up as a single device in the os. This is what the storage looks like on one of the nodes...
-
Rravage2k replied to the thread BackupPilot - Desktop Backup Client für Proxmox Backup Server.Habt ihr ein eigenes Forum oder einen Matrix-Chat? teste die Beta 5 und mein PBS sagt fehler bei der auth-id. ist das format für den benutzer username@pbs!tokenname ? irgendwo scheint hier was zu klemmen
-
SScaryGary posted the thread Replace mirrored boot drives in Proxmox VE: Installation and configuration.I've got two nodes running PVE 9.1.9 that are booting from mirrored 32GB M.2 Sata SSDs. All vms are on nfs storage. These nodes are repurposed Vmware ESXi:s and so far 32GB has been just enough. I'm unable to upgrade these to 9.2 however, since...
-
herzkerl reacted to bbgeek17's post in the thread Proxmox Virtual Environment 9.2 available! with Like.
Happy to report that we have successfully run our storage-oriented CI/CD workflows against PVE 9.2, and no issues were uncovered during the initial test runs. Congratulations again on a solid release. Sincerely, Blockbridge Blockbridge ...
-
herzkerl reacted to t.lamprecht's post in the thread Proxmox Virtual Environment 9.2 available! with Like.
We are excited to announce the release of Proxmox Virtual Environment 9.2. This release focuses heavily on platform refinement, stability, and core optimization. Proxmox VE 9.2 is built on the robust Debian 13.5 "Trixie" and ships with Linux...
-
UdoB reacted to leesteken's post in the thread apt-get update exit code 100 after 8 to 9 upgrade with Like.
Code 100 =1&c[nodes][0]=16&o=date']can happen when the enterprise repository is activated (which it automatically is after such an upgrade) and you don't have a subscription key. Check your repositories in the Proxmox web GUI and/or the manual... -
Sslavik-f replied to the thread Proxmox 9.2 installer hangs: waiting for /dev to be fully populated.And when I attempt to boot from Proxmox 9.2 ISO in the console mode: KERNEL PANIC!
-
