Latest activity
-
UdoB reacted to gyptazy's post in the thread Der Proxday 2026 in Deutschland, Mönchengladbach with
Like.
Hey zusammen, gerne möchte ich (einige kennen mich sicherlich bereits von ProxLB, PegaProx und den Ansible Modulen für PVE) euch auf das Community-Event Proxday 2026 aufmerksam machen, der von der credativ GmbH veranstaltet wird. Das Konzept ist... -
abied-charreton replied to the thread Incorrect supported CPU flags.KVM is our source of truth for CPU flag support, and it reports this flag (as well as others) regardless of the underlying hardware. I agree the vendor prefix in the name makes this confusing. However, this is correct in the sense that QEMU... -
or xcp-ng that supports until 64 nodes. -
If you need more than 32 nodes for compute maybe you have outgrown Proxmox VE and should look at larger systems like OpenStack.
-
jsterr reacted to fabian's post in the thread Cluster not quorate - extending auth key lifetime! with Like.
could you double check and post your network configuration/setup, including the switch config? in particular of the two "problematic" nodes? this looks like a network misconfiguration problem, though the logs don't give a clear indication *what*... -
You can configure the OS to reboot automatically after a kernel update. For Debian and Ubuntu see unattended-upgrades. See here. Then you never need to know...
-
Ttalos reacted to woma's post in the thread Moving from 3-node full-mesh SDN to a 6-node using switches with Like.
Hi Patrick, Because new and old machines are same numbers you will have resources to temporarily run all guests only using new machines, so my safe and boring approach would be: build new 3 node cluster connected to switches setup up and test...
-
FHi, could you share the error message, some details about PVE config?
-
Ffrankz replied to the thread Kernel error after pihole update.this and what I saw while loading pihole ● sys-kernel-config.mount depended failed Kernel Configuration File System as you will have noticed . what should I do you see the dmesg or the journal -xe ?
-
shanreich replied to the thread Broadcom BCM57504 - VLAN issues over Bond.Did you, by chance, ever find a solution for the issues you encountered? There have been some additional reports cropping up regarding this NIC model lately. I looked at the changelogs for the broadcom drivers as well, but couldn't find any... -
GWenn du Hosting betreibst und keinerlei Redundanz hast/verkaufst, dann muss der Kunde jederzeit mit Ausfällen rechnen und in dem Fall reicht eine einfache Ankündigung, heute Abend gibts ein Reboot. Wenn du was anderes mit deinen Kunden vereinbart...
-
Rrfournier replied to the thread Windows Server 2025 won't boot on AMD EPYC.Thank you both for your replies! I did try the flags=-nested-virt but it didn't help. Regarding kernel and qemu versions, I've downgraded from kernel 7 to 6.17 -> VM not booting Downgraded pve-qemu-vm from 11 to 10 -> still not booting I just...
-
JHi Fabian, Sorry for not getting back to you sooner. After a thorough investigation, we found out that one (1) of the cores in our Intel Xeon Gold 6154 CPU was faulty, causing the unexpected reboots.
-
JJohannes S reacted to fabian's post in the thread Cluster not quorate - extending auth key lifetime! with Like.
could you double check and post your network configuration/setup, including the switch config? in particular of the two "problematic" nodes? this looks like a network misconfiguration problem, though the logs don't give a clear indication *what*...
-
Mmkevenaar replied to the thread Proxmox with 48 nodes.Hi Fabian, Sorry for not getting back to you sooner. After a thorough investigation, we found out that one (1) of the cores in our Intel Xeon Gold 6154 CPU was faulty, causing the unexpected reboots.
-
driley replied to the thread Windows network issue in Proxmox: Unidentified Network.I would recommend trying out the `VirtIO (paravirtualized)` Model for your network card instead of the `Intel E1000` and see if that resolves your issue. For the VirtIO Model to work you will need to install additional drivers. The best way to... -
shanreich replied to the thread Proxmox Virtual Environment 9.2 available!.It's BGP unnumbered in particular, it can be used as underlay and works really well with Wireguard as well, or just for announcing routes from EVPN VRFs. It slotted really well into the existing fabrics and in conjunction with upcoming features...
-
Jjixuuse replied to the thread [SOLVED] Is the global welcomelist really effective?.写英文没人回，我干脆写中文吧 我查看到信息中“KAM_DMARC_REJECT 7 DKIM has Failed or SPF has failed on the message and the domain has a DMA” 这是我们的重要合作伙伴，所以我想直接告诉pmg应用一下白名单，应该怎么做？
-
jsterr reacted to gyptazy's post in the thread Der Proxday 2026 in Deutschland, Mönchengladbach with Like.
Hey zusammen, gerne möchte ich (einige kennen mich sicherlich bereits von ProxLB, PegaProx und den Ansible Modulen für PVE) euch auf das Community-Event Proxday 2026 aufmerksam machen, der von der credativ GmbH veranstaltet wird. Das Konzept ist...
-
gyptazy posted the thread Der Proxday 2026 in Deutschland, Mönchengladbach in Proxmox VE (Deutsch/German).Hey zusammen, gerne möchte ich (einige kennen mich sicherlich bereits von ProxLB, PegaProx und den Ansible Modulen für PVE) euch auf das Community-Event Proxday 2026 aufmerksam machen, der von der credativ GmbH veranstaltet wird. Das Konzept ist...