Latest activity
-
TTushar Tyagi replied to the thread Proxmox VE arm64.Thomas, thank you for bringing clarity to this .I genuinely appreciate it. I’m working as a Cloud Solution Architect, and the deeper I explore Proxmox, ARM, and open infrastructure, the more questions and ideas I end up with around scalability...
-
Aabufrejoval replied to the thread [SOLVED] one node "Cannot initialize CMAP service".As it turned out, I was moving three "independent" nodes into the main cluster.... I guess I had forgotten, why I originally had them separate, other than that they had local dependancies anyway, so I wasn't going to move VMs around. Anyhow I...
-
Ppavlos replied to the thread [solved] pve 8 to 9 fail.Thank you all for your help. I am the one who failed. The migration from 8 to 9 works fine, I messed up. there was another disk attached to the server, I removed it and pve booted up nicely. pveversion says: pve-manager/9.2.2/b9984c6d90a4bd80...
-
Aabufrejoval reacted to take's post in the thread [SOLVED] one node "Cannot initialize CMAP service" with
Like.
In my case it was time synchronization issue: I had lost connection to a node than after reading this thread first checked node's time and found it is out of synchronization 'cause it did not have Internet connection due to wrong gateway. So I... -
Aabufrejoval reacted to Syrrys's post in the thread [SOLVED] one node "Cannot initialize CMAP service" with Like.
It's embarrassing how often I need to come back to this thread :( Thanks :)
-
Aabufrejoval reacted to tsimblist's post in the thread [SOLVED] one node "Cannot initialize CMAP service" with Like.
I just learned it should be online when I remove a node too.
-
Rrfournier posted the thread Windows Server 2025 won't boot on AMD EPYC in Proxmox VE: Installation and configuration.Hi, I'm trying to install a Windows Server 2025 VM, unfortunately I'm stuck in a loop after the first reboot following the installation. UEFI sees the EFI boot entry and starts Windows Boot Manager but instantly after that it goes back to...
-
THi Team, Congrats on the new launch! I have been doing deep research around ARM-native cloud infrastructure and open-source virtualization ecosystems. I wanted to understand Proxmox’s long-term vision around ARM64 support, especially in the...
-
Ddaanw replied to the thread [solved] pve 8 to 9 fail.These are Linux kernel versions, not Proxmox versions. So you are booting your updated Proxmox 9 with Linux kernel 7.0.2-6-pve. At the end of the existing kernel command line, append systemd.unit=rescue.target or systemd.unit=emergency.target...
-
MI think the OP is talking about MailGateway (not sure since his post doesn't say much about what he actually wants to achieve) not PVE. The recommendation is the same though: https://pmg.proxmox.com/pmg-docs/pmg-admin-guide.html#chapter_pmgupgrade
-
HHammyHavoc replied to the thread Proxmox host and VM both failing large HTTPS downloads with Bad Record MAC / TLS decryption errors.Have you tried it on PVE 6.x? I'm having issues with an e1000e NIC not working under 7.x on a single node. Port doesn't even light up, but works fine when I boot into 6.x.
-
fba replied to the thread Proxmox Virtual Environment 9.2 available!.Thanks for clarification. I had around 20 single servers updated yesterday at different times and seeing a different menu only on one of them, was a bit confusing. -
KKingneutron reacted to THE_BIG_ONE's post in the thread Q35 v11.0 causes extreme corruption on many VMs Linux/BSD/Windows (STOP 0x8007025d) with Like.
I've finally narrowed down the exact settings / what is causing the issue. I've been repeating installs on 4 different proxmox host machines over and over changing one thing at a time and comparing. It's the SSD and Discard flag being set...
-
fba replied to the thread Proxmox Virtual Environment 9.2 available!.The Roadmap states I did see this Datacenter → Guest Resources/Hardware on a PVE 9.1.19 yesterday evening, but not today anymore on a PVE 9.2.2. The menu is flat again without Guest Resources/Hardware. What am I missing?
-
KKingneutron reacted to bbgeek17's post in the thread Proxmox Virtual Environment 9.2 available! with Like.
Happy to report that we have successfully run our storage-oriented CI/CD workflows against PVE 9.2, and no issues were uncovered during the initial test runs. Congratulations again on a solid release. Sincerely, Blockbridge Blockbridge ...
-
Rromek92 replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Kernel: 7.0.2-6-pve HW CPU: AMD GX-424CC I am experiencing very high CPU usage after a kernel update. There is a huge overhead in CPU usage in SY time. perf output: + 41.10% 0.05% [kernel] [k] entry_SYSCALL_64_after_hwframe + 41.05% 0.10%...
-
LLe_Coyote replied to the thread LXC: cannot mount /run inside guest after PVE 8 to 9 upgrade (was: loopback interface not coming up).Thank you, much appreciated!
-
JJohannes S replied to the thread Useful Tips.I think the OP is talking about MailGateway (not sure since his post doesn't say much about what he actually wants to achieve) not PVE. The recommendation is the same though: https://pmg.proxmox.com/pmg-docs/pmg-admin-guide.html#chapter_pmgupgrade
-
HHenris reacted to Weissnix4711's post in the thread [SOLVED] How to do DNAT with SDN custom rule on Single host? with Like.
Sorry to bump an old thread, but have there been any developments re. DNAT in proxmox-firewall? Is there a roadmap or feature tracker somewhere?
-
PToday, I upgraded my pve from 8 to 9. This is a basic pve (36 cores, 64GB ram) that runs 4 pct. Ran the pve8to9 test, all good. All containers stopped. Changed bookworm to trixie on sources and pve-no-sub. apt update, then apt dist-upgrade...
-
