Latest activity
-
Tthadd2002 posted the thread [SOLVED] Issues installing from usb in Proxmox VE: Installation and configuration.I'm trying to install proxmox ve 9.* and I'm having issues. I've done all the usual suggestions secure boot off, boot orders that sorta thing. I've tried these 3 methods Ventoy, Balana etcher and Dd command. Installation with ventoy causes the...
-
-
JJohannes S replied to the thread Bester Weg für Fileserver (samba).Doch, dagegen spricht einiges: Innerhalb eines Contaners ist die Umgebung doch noch besser isoliert, als wenn der Dienst direkt auf den Host läuft. Und samba (anders als NFS) kann man prima in unpriviligierten Containern betreiben, es spricht...
-
Tthemmmaroko posted the thread Clustered iSCSI as LVM on LVM-Thin SAN in Proxmox VE: Installation and configuration.Hello all. I am aware the issue of configuring LVM-Thin in a clustered environment with shared storage has been extensively discussed and why it is a really bad idea. However, l would like to ask this question from a different angle. When...
-
-
Wwhiggs posted the thread Proxmox vms connected to a bridge that is not configured with the default gateway unable to see physical machines connected to the same network in Proxmox VE: Networking and Firewall.So, I have noticed some interesting behavior with proxmox's networking. Consider the below hosts network configuration: So, as you can see, I have several linux virtual bridges that are tied to several unique, physical nics on the host. Now...
-
-
Ffw1976 reacted to Neobin's post in the thread QEMU 11.0 available on pve-test and pve-no-subscription as of now with
Like.
A patch: [1], thanks to @fiona, to "disable cet-ibt and cet-ss flags for modern Windows by default" is in qemu-server 9.1.12: [2], which already is available in pve-no-subscription. [1]... -
Rrahman posted the thread Lock errors in Sync job during Verify job running in Proxmox Backup: Installation and configuration.Hi, Is it normal to get bellow error in a Sync (pull) job when also a Verify job running on the same datastore? 2026-05-16T09:00:14+03:00: [vm/164]: sync group vm/164 failed - 2026-05-15T22:00:43Z: while creating locked snapshot 'BackupDir {...
-
Mmunchworker replied to the thread [SOLVED] Trying to enable nested virtualization results in perfomance loss on vm.Thank you both, enabling the Hyper-V enligthenments via the vm config file worked and the custom cpu model also works. Performance is now at an acceptable level.
-
BBerndKleinert replied to the thread Bester Weg für Fileserver (samba).Sehr interessanter Thread. Bin seit paar Tagen ebenfalls am überlegen wie ich das auf einem QNAP TS-453D (32GB Ram) umsetze, dieses OS von Qnap nervt mich nach paar Jahren Nutzung nur noch. Dachte auch daran, Proxmox zu installieren und dann dort...
-
Ppulipulichen replied to the thread Using GCP Always Free e2-micro as a QDevice for a 2-node Proxmox VE cluster: any pitfalls?.Thank you so much for sharing your test results! It’s amazing to know that even latency of up to 1s is still workable for the QDevice. That is truly a valuable piece of real-world experience. I also completely appreciate your point regarding the...
-
Mmunchworker replied to the thread [SOLVED] Trying to enable nested virtualization results in perfomance loss on vm.I checked and there is no driver support for our nvidia card on either 6.17 nor 7.0 Kernel :( so that is currently not an option.
-
Sstevehughes posted the thread Nested ESXi VM hangs on boot in Proxmox VE: Installation and configuration.My PVE cluster is 6 hosts with AMD EPYC 24core CPUs and 1TB RAM each, running 9.1.4. I want to function as a DR site for a client who runs vSphere. To this end I want to build a few large nested ESXi 8.0 VMs. I've installed ESXi in a VM, and it...
-
GGMBauer replied to the thread [SOLVED] RAM in Proxmox nur teilweise erkannt - 188 GB von 256 GB.Hey Leute, das ist erstens kein Serverboard und zweitens ist die ganze Hardware... naja, sagen wir mal "refurbished". Ich bin mir sehr sicher, dass der TE das nicht produktiv verwendet. Ich hoffe es zumindest...
-
GGMBauer reacted to Scoobydru's post in the thread [SOLVED] Windows Server 2025 Standard startet nach heutigem Update nicht mehr with Like.
Hi Neobin, I only joined to say "thank you" the downgrade worked a charm Regards
-
WWeltherrscher replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Ok, I narrowed my problems down to either the 16.4 nvidia enterprise host driver and / or the kernel option "iommu=pt". After 6.17 showed the same failures I tracked my last actions on the server which were the installation of the nvidia driver...
-
DDultas replied to the thread Proxmox can't restore from backup and deleted the LXC I was trying to restore.Was able to resolve using pct restore. Seems the UI was doing a check on the debian version that was seemingly unnecessary.
-
Jjaynguyen replied to the thread [TUTORIAL] Automated Installation + PXE boot.I think you forgot this option or type wrong name image (e.g "initrd.img" instead of "initrd-custom.img")
-
-
Ppulipulichen reacted to UdoB's post in the thread Using GCP Always Free e2-micro as a QDevice for a 2-node Proxmox VE cluster: any pitfalls? with Like.
Yes. I had tested high latency some time ago: https://forum.proxmox.com/threads/qdevice-deployment.173182/post-805735 Probably none, but I do not use it, so I can not tell. But involving a device "on the other side of the internet" is the exact...
-
Iivenae replied to the thread [SOLVED] Windows Server 2025 Standard startet nach heutigem Update nicht mehr.Als großzügiger Nutzer von No Subscription muss ich leider sagen, dass ich halt einfach mit so etwas leben muss. Ich mache die Updates monatlich (automatisiert) und starte nur ca. 1/4 der Kisten in der gleichen Nacht neu, die anderen warten 24...
-
NNevuly replied to the thread [TUTORIAL] Configuring Fusion-Io (SanDisk) ioDrive, ioDrive2, ioScale and ioScale2 cards with Proxmox.A critical error occurs in the latest update (7.0 kernel) when using SATA Passthrough or PCIe Passthrough for the ioDrive2. This issue has currently been reported, so please wait until it is resolved.
-
Bbossanova808 replied to the thread Asymmetric Tailscale speed issue with Kernel 7 and multiple NIC types.VM - same results (as others have also reported). Host - I do not want Tailscale on the host (but iperf3 performance without Tailscale is fine).
![2026-05-18 02_35_41-nirsoft (Ctrl+F12 - properties) [Control].png](/data/attachments/97/97458-1ad0233505add71f7806813219d6eb68.jpg?hash=LWOjV2_RqJ)
