Latest activity
-
Eericcl reacted to jterry's post in the thread Solution for "The repository 'http://download.proxmox.com/debian/pbs-client trixie InRelease' is not signed" error with
Like.
Hello I've solved this error with PBS Client in Debian 13 (Trixie): Warning: OpenPGP signature verification failed: http://download.proxmox.com/debian/pbs-client trixie InRelease: Sub-process /usr/bin/sqv returned an error code (1), error... -
Tterramotu replied to the thread [SOLVED] Dell R730 cannot boot Proxmox 9 kernel (boot loop after install).Thanks @Onslow ! The guide perfectly solved my issue and I successfully booted the proxmox kernel !
-
GGnosh replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription.driver: atlantic version: 7.0.2-2-pve firmware-version: 1.3.24 expansion-rom-version: bus-info: 0000:0e:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes Definitely...
-
Ccelemine1gig replied to the thread Problems with PCIe passthrough with two identical devices.@sacredx72: See here: https://forum.proxmox.com/threads/problems-with-pcie-passthrough-with-two-identical-devices.149003/post-826291 Same procedure.
-
Uuzumo replied to the thread Unable to get Arc Pro B50 to function.I don’t own an Arc Pro B50, so I can’t say for sure, but I use an Arc B580 and have never made any configuration changes under /etc/modprobe.d/. It will work properly simply by adding the necessary vfio-related entries to `modules` and specifying...
-
KKingneutron replied to the thread 7.0.2-2-pve breaks Graylog due to MongoDB on an LXC..https://search.brave.com/search?q=linux+kernel++breaks+mongodb&summary=1&conversation=091155146a6ea0e8301d2f368ba78ca1a165 I remember reading about the issue a couple of weeks ago but the article might have been in an app, can't find the exact...
-
Ssacredx72 replied to the thread Problems with PCIe passthrough with two identical devices.This is all great and good, but I’m surprised that this patch was made only for 1164, I have similar devices, but on an asm1166 chip, and they have exactly the same problem. I think that this problem applies to the entire 116* line and requires a...
-
KKingneutron replied to the thread Check the disk usage of a virtual machine.> After I created a Linux virtual machine in proxmox, I allocated 40G of space to it, and then I wanted to check its real-time disk usage. Rate, for example, he uses 10G in the system. I want to get this approximate value. When I use du -h to get...
-
Mmystica555 replied to the thread ZFS Problem with DirtyFrag Fix Kernel.If you aren't averse to kernel 7, 7.0.2-2-pve works fine with zfs for me.
-
KKingneutron reacted to hstende's post in the thread Check the disk usage of a virtual machine with Like.
This project looks promising in monitoring disk usage etc: https://github.com/rcourtman/Pulse
-
KKingneutron reacted to somedude's post in the thread Check the disk usage of a virtual machine with Like.
`df` does not work with files. It reports filesystem utilization.
-
KKingneutron reacted to SInisterPisces's post in the thread Check the disk usage of a virtual machine with Like.
Thi would be a great feature Thanks for referencing that bug report, @smalltrex ! That bug's been open since 2017. ZFS didn't even allow that kind of filesystem query then, so hopefully we're in a better position now for this feature to become...
-
KKingneutron reacted to MacGyver's post in the thread Check the disk usage of a virtual machine with Like.
> apt install jq > qm agent 100 get-fsinfo | jq -r '.[] | select(has("total-bytes")) | .mountpoint + " is " + ((."used-bytes" / ."total-bytes" * 100) | round | tostring) + "% full"' Example output for a *nix VM: /var/log/journal is 67% full...
-
TTightrope2718 posted the thread Unable to get Arc Pro B50 to function in Proxmox VE: Installation and configuration.Hello, I have been struggling with this issue for awhile, but I am unable to proceed further. I cannot seem to find anyone else who is having a similar issue to me. In my server I have an Arc A380 that I wanted to upgrade to an Arc Pro B50. My...
-
RReev replied to the thread Config for Network UPS Tool (NUT) for Prolink.Hello, I am using a PRO1201SFCU and when I try to do step 10 @ upsdrvctl start, it shows this output at the attached file. I am currently stuck at what I am supposed to do now and I would really appreciate any help I could get
-
-
Eepionier replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription.@Gnosh You can read out information of driver and firmware version via: ethtool -i eth0 (eth0 needs to be replaced by your real adapter name) edit: According to Link Forum a user with ProArt X870E updated succesfully fw to 1.5.45
-
WWolveraptor replied to the thread [SOLVED] AlmaLinux 10 LXC Start-Up Error.I also tried making a privileged LXC but it is the same error. I do recall that RHEL 10 as a VM also does not work and the LXC behavior seems similar to this post about RHEL, AlmaLinux, and Rocky Linux 10 in this post. Unfortunately, since I...
-
-
WWolveraptor posted the thread [SOLVED] AlmaLinux 10 LXC Start-Up Error in Proxmox VE: Installation and configuration.Hey there Proxmox Community! Hoping to get get some assistance in diagnosing what the issue may be. It sounds like it may have something to do with this. The below is the output of pct start 300 --debug. INFO confile -...
-
GGnosh replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription.I'm on ProArt X870E-CREATOR. Need to look in to that. @bossanova808 looks very similiar. Only difference for me was that I have it running in a VM. Having firewall on/off made no difference.
-
Aalexskysilk replied to the thread iscsi direct luns with multipath.fiber channel multipathing works effectively identically to iscsi; once the devices are captured by multipathd they'll just show up in /dev/mapper and you can use them as any other mapper device- so you can put a vg on it or map is as a drive...
